Workshop Tools

• These heavy duty CV Boot Clamp Pliers can be used by hand or with the assistance of a power bar and torque wrench if specific torque is required
• PVC dipped handles for comfort
• Suitable for installation of certain clamps on fuel filters, water pumps and other cooling systems

• Pin hole to enable securing of socket.
• Knurling area for better finger grip.
• Stamped sizes for quick and easy identification.
• Dual-material rubber retainer prevents wear down and enables secure hold.

• Temperature Range: -10°C to 60°C
• Burst Pressure: 63 bar (3:1 safety factor)
• Working Pressure (1): 300 psi / 21 bar
• Exceeds: BS EN ISO 2398:1997 (BS 5118:1980)
• Conforms to: ISO 5774:2008 (BS 6066:1981)
• Silicone free
• Resistance to oil and fuels
• Good flexibility and kink resistant
• Excellent abrasion resistance

• Conforms to ISO 5774:2008 (BS 6066:1981)
• ExceedsBS EN ISO 2398:1997 (BS 5118:1980)
• Hose Fittings Vertex Coupling & Standard Adaptor
• Working Pressure (Please note - an increase in temperature above 20°C will affect the working pressure quoted above.) 300 psi / 21 bar
• Burst Pressure 63 bar (3:1 safety factor)
• Temperature Range -10°C to 60°C
• Hose Length 10m
• Hose Inside Diameter 10mm / 3/8 in
• Hose Outside Diameter 17mm

• 48 teeth teardrop head design allows for greater applied torque
• Reversible lever allows for quick change between forward and reverse

• Chrome alloy steel, chrome plated.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Durable double stacked pawls for longer ratchet life.
• 144 Ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.

• Rounded I-Beam handle for comfortable handling grip.
• 180° pivoting head for greater access to tight spaces.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Chrome alloy steel, chrome plated.
• Durable double stacked pawls for longer ratchet life.
• 144 ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.
• Ink-filled labels for better visibility.

• Constructed with a 8 Tpi design for fast starts and smooth cuts large gullets for easy chip ejection and a unique carbide blend the TORCH Blades with NITRUS CARBIDE are designed to last the longest and cut the fastest in cast iron / SML pipe and other thi
• This special carbide NITRUS blend is designed to cut 3x longer than existing standard carbide teeth blades.
• Best performance in all thick metals and especially cast iron soil waste and drainage pipes
• 25 mm blade height for improved stability and minimum vibration.
• The TORCH blades with NITRUS CARBIDE teeth is the next generation of carbide technology.
• Thick 1.27 mm robust blade body for precise straight cuts.

• SHOCKWAVE™ IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Dual hole design and groove for security accessories.
• Ball detent design for superior impact socket retention.

• High quality hot-forging process provides a performance exceeding ASME standard
• Popular range of metric sizes fits most circumstances
• High visibility color filled size mark for easy identification during use
• Premium Chrome Finish
• 15 degree offset box end
• Anti-Slip and radius corners on open end

• ASME Compliant

• One hand locking mechanism.
• Made from forged alloy steel for best durability – Cr Steel.
• Less hand fatigue when cutting thicker materials. Design with compound leverage action.
• Aviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.
• Ergonomic and durable overmoulded grips add comfort and last longer.
• Triple cutting direction identification – on the head, handle and by colour coded handle.
• Torsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.
• Thumb and forefinger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.
• Extra long aviation snips: For longer and straighter cuts in one go.
• Offset snips: For long continuous straight or curved cuts. 45° offset keeps users hand away from the cutting material.
• Chrome plated rust protected forged blades for increased lifetime. Extra hardened to 65 HRC.
• Serrated cutting edges prevent slippage when cutting.
• Flush slimline design for non-snagging in material.

• One hand locking mechanism.
• Made from forged alloy steel for best durability – Cr Steel.
• Less hand fatigue when cutting thicker materials. Design with compound leverage action.
• Aviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.
• Ergonomic and durable overmoulded grips add comfort and last longer.
• Triple cutting direction identification – on the head, handle and by colour coded handle.
• Torsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.
• Thumb and forefinger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.
• Extra long aviation snips: For longer and straighter cuts in one go.
• Offset snips: For long continuous straight or curved cuts. 45° offset keeps users hand away from the cutting material.
• Chrome plated rust protected forged blades for increased lifetime. Extra hardened to 65 HRC.
• Serrated cutting edges prevent slippage when cutting.
• Flush slimline design for non-snagging in material.

• One hand locking mechanism.
• Made from forged alloy steel for best durability – Cr Steel.
• Less hand fatigue when cutting thicker materials. Design with compound leverage action.
• Aviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.
• Ergonomic and durable overmoulded grips add comfort and last longer.
• Triple cutting direction identification – on the head, handle and by colour coded handle.
• Thumb and forefinger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.
• Extra long aviation snips: For longer and straighter cuts in one go.
• Offset snips: For long continuous straight or curved cuts. 45° offset keeps users hand away from the cutting material.
• Chrome plated rust protected forged blades for increased lifetime. Extra hardened to 65 HRC.
• Torsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.
• Serrated cutting edges prevent slippage when cutting.
• Flush slimline design for non-snagging in material.

• Manufactured from S2 steel for strength
• VDE 1000V tested and certificated
• Sizes: T10, T15, T20, T25, T27, T30, T40, T45, T50
• Ideal for use on electric and hybrid vehicles
• Packed in a plastic storage

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Durable grip handle with an anti-slip design.
• Strong steel head prevents chipping on contact.
• I-Beam handle construction resists bending.
• Precise balance for better handling and control.
• SHOCKSHIELD grip reduces peak vibration.

• Double Locking Pin for Safety
• 10 Position Ratchet Bar
• Stop Tab for Security
• T-Type Welding for Added Durability
• Sold in Pairs
• Ratchet Type

• UKCA /CE

• Gas cartridge sold separately
• For use with G2400 Go System propane gas cylinder
• Fitted with CGA600 connection
• Safety checked and test burned
• Ideal for plumbing, brazing and automotive
• Auto start Piezo ignition
• Swirl flame for more even heat distribution, wrapping around the target
• Instantly FLARESAFE; use at any angle
• A durable high power, high temperature (up to 1500 C) gas torch
• Ergonomic handle for maximum grip

• Conforms to BS:EN521

General Information

Brake Drum Wear Gauge. Brake Drum Wear Gauge

• Metric and Imperial scale
• Measures drum wear
• Selected steel
• Size range 160mm - 400mm fits a larger range than most similar products on the market
• Brake drum wear gauge

General Information

Spanner Extension Wrench Spanner Extension Wrench.

• Gloves and goggles should be used in high powered situations
• Manufactured from Chrome Vanadium with high Chromed finish
• Universal use
• Length 385mm
• Extends the length of spanners when you need more leverage

• Includes: (17) 2 in. PH: #1, #2(2), #3, PZ: #1, #2, #3, Star: T-10, T-15, T-20, T-25 (2), T-27 (2), T-30 (2), T-40
• Includes: (7) 3 in. PH: #2 (4), Star: T-20, T-25, T-30
• Includes: (3) 1.8 in. Magnetic Nut Driver: 8mm, 10mm, 12mm
• Includes: (1) 2.4 in. Stainless Impact Bit Holder
• Includes: (14) 1.25 in. PH: #1, # 2 (2), # 3, PZ: #1, # 2 (2), #3, Star: T-10, T-15, T-20, T-25, T-27, T-30
• Torsion Zone
• High Quality Materials
• Precision manufacturing
• Laser Etched Sizes

• Insulated
• Hardened
• CR-MO
• Combination, Long Nose, Diagonal, Cutting and Wire Stripping
• Comfort non-slip grip

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Replacement knuckle joints available (not covered by Lifetime warranty)
• Chrome Vanadium body and Chrome Molybdenum head for extra strength
• Get the extra leverage you need to break loose frozen and stuck nuts and bolts.

• Leak Proof Cylinder
• Welded Carry Handle for Easy Transportation
• Safety Valve to Prevent Overloading
• 60mm Extending Screw
• Adjustable Screw to Change Height
• Welded Base Increasing Stability

• TUV

• Use on any other product than advised may result in damage to tool motor and may void tool warranty.
• Not for use on or near live electrical circuits.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.
• Flexible material allows for easy install and removal.
• Form-fitting, lightweight design protects the tool and work surface while adding minimal size or weight to the tool.

• Flexible battery system: works with all MILWAUKEE® M12™ batteries
• 90° rotating head allows the user to easily direct the light beam at the desired work area
• Sealed aluminium head is designed for impact- and weather-resistant durability
• The 120 lumen LED light is 2x brighter and whiter than conventional incandescent bulbs
• Magnetic back for hands-free use
• M12™ LED electronics deliver 2x longer run time on a single charge with less heat

• Flexible material allows for easy install and removal.
• Form-fitting lightweight design protects the tool and work surface while adding minimal size or weight to the tool.
• Use on any other product than advised may result in damage to tool motor and may void tool warranty.
• Not for use on or near live electrical circuits.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.

• Fits most UK & European Vehicles
• Programmable Sensor
• 433mhz sensor