Workshop Tools

• Made from Chrome Molybdenum
• Due to the nature of this product they are considered consumable and not covered by the Laser guarantee
• An impact adaptor that reduces 1in. drive (F) accessories down to 3/4in. drive (M)

• Instructions included
• Suitable for all non-toxic fluids and safe and easy to use
• Also suitable for household plumbing systems etc
• Quick and effective for water and other liquids Not suitable for petrol
• 175mm overall length Pipes are 900mm long
• An ideal tool for transferring fluid from one vehicle to another

• Time saver
• Easy visibility
• Quality tool
• Master tyre pressure gauge with angled head for easy access and visibility 10-100PSI / 05 - 7BAR

• Essential for routine service on modern vehicles
• The paper filter can then be replaced successfully
• Plus Renault Megane, Laguna 15, 19, 22, 25 DCi engines and Mercedes-Benz
• For Citroën and Peugeot vehicles including Citroën Visa Dti, AX, Saxo, ZX Xantia and Peugeot 205, 306, 309, 405, 406, 806 models
• Removes the outer casing of eco-oil filters without damage

• Socket and installing ring for replacing the suspension joint on Mercedes M Class front and rear suspension
• 3/4in. drive
• Complete with installing ring
• Once the joint is fitted, the installing ring supplied with the socket is removed and the ring supplied with the joint, which has thread lock compound, is fitted to secure the joint permanently

General Information

Timing Pins - Renault engines. Timing Pins - Renault engines

• OEM codes MOT 1489/1054/1430, Mercedes 607 589 01 15 00, 607 589 00 15 00
• For Flywheel locking on Mercedes Benz Citan use Laser 3203 (starter motor removal required)
• Renault engine code K9K (2002-on), Mercedes 607951 (K9K) (2012 on)
• Popular with the Nissan Micra 15 Dci
• Crankshaft and Camshaft timing pin set for Renault 15 and 19 DCi engines fitted to Laguna, Kangoo and Clio models

General Information

Diesel Injector Puller

• Saves time and money when injectors are difficult to remove
• Incorporating a slide hammer
• Presented in a handy blow mould case
• Diesel Injector Puller with M8/M12/M14 adaptors Assists removal of stubborn Bosch and Lucas diesel injectors

• These heavy duty CV Boot Clamp Pliers can be used by hand or with the assistance of a power bar and torque wrench if specific torque is required
• PVC dipped handles for comfort
• Suitable for installation of certain clamps on fuel filters, water pumps and other cooling systems

General Information

Timing Tools - Land Rover/Jaguar V6. Timing Tools - Land Rover/Jaguar V6

• Camshaft sprocket timing pins 303-1126
• Camshaft Sprocket aligning tool 303-1132
• Flywheel Locking Tools - OEM 303-1117 (Automatic Transmission) 303-1116 (Manual Transmission)
• Engine Code 276D T 2004-2007
• Timing pins for Land Rover Discovery 2.7 TDV6, Range Rover Sport 2.7 TDV6 and Jaguar S Type TDVi with V6 engines with automatic and manual transmissions

General Information

Flywheel Locking Tool. Flywheel Locking Tool

• Flywheel Locking tool OEM 21-168/303-393
• Flywheel Locking tool adaptor (01) 303-393-02
• Flywheel Locking tool adaptor (01) 303-393-01
• Flywheel locking tool for Ford diesel and petrol engines

General Information

Compression Test Adaptor Compression Test Adaptor.

• Also used on Peugeot 207/307 and Renault 12 16 valve
• BMW, Mini, Mercedes-Benz M156 (AMG engine manufactured from 2006 onwards
• This tool is now essential on BMW E90 335i with N54 engines (2006)
• This extra long Compression Test Adaptor is designed to fit 12mm Spark Plugs

General Information

Timing Tool Set 2.0lt TDi PD - VAG Timing Tool Set 2.0lt TDi PD - VAG.

• Tools also available separately
• Full OEM reference and guidance notes included with each set
• Specifically designed for Belt driven diesel engines
• Timing tool kit for VAG 2.0 litre TDI, PD & DOHC engines fitted to Audi A4, Audi A6, Skoda Octavia II, Volkswagen Golf, Jetta and Touran models

Technical Information

Timing Tool Set - Ford/Volvo. Timing Tool Set - Ford/Volvo

• Camshaft Locking Strap now includes OEM 303-376B
• Made in Sheffield
• Also used on Volvo models with 18/20 CHAIN engines
• Also included in the kit is 303-748 (21-259) for Focus C-Max 16, 14, 16 and Fiesta Fusion 124 & 14
• This new camshaft setting bar updates the existing 3096 and is suitable for all the applications including the latest HWDA, HWDB & HXDA engines

• It has a 14mm Bi-Hex x 65mm 12pt 3/8in. drive and is made from Chrome Vanadium. Also used on other manufacturer's fitted with 8mm Bosch spark plugs such as:
• Renault 1.2 16v
• Peugeot 207 and 307
• Mercedes-Benz M156 engine
• BMW Mini
• BMW E90335I N54 engine 2006
• This specially designed - thin walled Spark Plug Socket with a spring clip to hold the plug is used on most Citroen vehicles

General Information

Diesel Engine Timing Tool - Fiat 2.3 JTD Diesel Engine Timing Tool - Fiat 2.3 JTD.

• The 23 JTD twin camshaft Common Rail diesel engine is belt driven between crankshaft and inlet camshaft but utilises a chain to connect both camshafts
• The high pressure fuel pump does not require timing
• This kit includes the latest Crankshaft Timing Pin required on engines produced from 2006-2008
• This kit includes the latest crankshaft timing pin
• An engine timing locking tool set for fiat ducato 23 JTD with engine codes: F1AE0481C, F1AE0481D, F1AE0481N 2002 to 2008 and the Fiat 30JTD with engine code F1CE0481D

General Information

Deep Impact Socket 3/4"D 32mm

• Manufactured from Chrome Molybdenum
• Available in range 19mm - 46mm
• Deep Impact socket
• Part of a range of Deep Impact Sockets in 3/4in. drive

• Part of a range of Deep Impact Sockets in 1in. drive
• Deep Impact socket
• Available in range 22mm - 70mm
• Manufactured from Chrome Molybdenum

• Manufactured from Chrome Molybdenum
• Available in range 22mm - 70mm
• Deep Impact socket
• Part of a range of Deep Impact Sockets in 1in. drive

General Information

Aluminium Repair System Aluminium Repair System.

• Can be used with standard heat source
• Complete with tinning brush & 5 aluminium rods
• This product will repair any damage to aluminium parts quickly and effectively without using flux or chemicals
• Using a standard heat source these aluminium brazing rods can repair damage to most aluminium parts without using flux or chemicals Brazes all Aluminium Alloys, including Zinc, Magnesium, Pot Metal and Cast Aluminium

• Spring loaded trigger
• Nickel plated nozzle
• Use with air compressor
• Quick removal of dust and particles
• 100mm (4in.) lance

General Information

Manual Pressure Brake Bleeder 2L

• Designed to use with most brake master cylinder reservoirs measuring 1in. to 3in.
• Is supplied along with a European adaptor
• 2 litre container supplied with European adaptor
• Easy to use and designed for single handed operation
• Manual brake bleeder

• Designed to reduce the risk of damaging the motorcycle wheel rims when fitting or removing tyres
• Set of two
• Soft material will not damage the rims
• String line attachment for easy removal

General Information

Oil Filter Wrench - 64.5mm x 14 Flutes x 3/8"D

• 3/8in.D
• Removes filters without damage to the filter housing
• Oil Filter wrench size: 645mm x 14 flutes
• An aluminium Oil Filter Wrench specifically designed for use on Toyota (07-08) 35L V6 and Lexus GS300 (06-) IS250(2006-) IS350(2006-) ES350(2007-) GS350(2007-) GS450H(2007-) LS460(2007-) RX350(2007-) LS600H(2008-)

General Information

Timing Tool Kit - fits Renault 1.6/2.0/2.3 DCI/ Nissan Timing Tool Kit - fits Renault 1.6/2.0/2.3 DCI/ Nissan.

• OEM Codes: EN48334, EN48332, EN48331, EN48330 Made in Sheffield
• Supplied in metal storage case
• Two crankshaft locking pins are now included to cover for the 16 DCi (Comp G) and 20, 23 DCi (Comp F) Component G - Crankshaft Locking Pin has been added for later M9T 20 and R9M 16 DCi engines
• Timing tool kit for Renault 20DCI chain drive diesel engines fitted to the Megane/ Vel Satis/Espace/Scenic/Trafic/Laguna/Koleos also fitted to the Nissan Qashqai and the Vauxhall/Opel Vivaro Packed in a metal case for storage Application list and OEM

• Motorcycle fork oil level adjuster
• Syringed hollow filler
• Aluminium level adjuster
• A quick and accurate way of setting and adjusting fork oil levels
• Quick and accurate
• Time saver

General Information

Telescopic Stainless Steel Mirror 6.3 X 4.5cm Telescopic Stainless Steel Mirror 6.3 X 4.5cm.

• Angled for increased applications
• Soft Grip handle
• Extends from 228mm to 717mm
• Unbreakable mirror

• Measures 63mm x 45mm

• Includes 1.6mm graduation for minimum tyre depth
• 1mm to 22mm
• Chrome plated finish
• 6 sizes calibrated
• Brass construction

General Information

Engine Timing Tool Kit - BMW.;,,**,/ Engine Timing Tool Kit - BMW;,..*,*.

• Made in Sheffield
• Essential tool kit
• Pump Pulley Removal Tool included. Manufactured from selected steel
• Applications include BMW 2.0 N47 | N47S (2007-2010)

• Made in Sheffield.
• Essential tool.
• Selected steel.
• Suitable for use on 1 Series E81,82,87,88, 3 Series E90,91,92,93 & 5 Series E60,61,X3 E83 X1.
• Equivalent to OEM Ref 11 8 740.

General Information

Butane Heating Torch. Butane Heating Torch

• Accepts standard self sealing threaded butane gas cartridges (not included)
• CE approved
• For heating and soldering. Ideal for use with Laser Part No 4707 Aluminium Repair System
• Piezo electric ignition
• Adjustable burner with maximum of 1300C
• A robust butane heating torch with a temperature of 1300C burner