Workshop Tools

• Type M: Cone for angled edges and narrow contours.
• Type H: Flame for contouring.
• Type D: Ball for milling holes and creating concave cuts.
• Type C: Cylindrical ball nose for top and side cutting.
• Includes: Types B ,C ,D, H, M.
• Suitable for unhardened and hardened steel, cast iron and non ferrous metals (aluminium, brass, copper).
• Double cut toothing geometry ensures excellent material removal, low vibrations for easier handling and smaller swarfs.
• According to DIN 8033.

General Information

Engine Timing Tool Kit - GM engines.;, Engine Timing Tool Kit - GM engines;,..

• Instructions included
• Also fits Chevrolet Cruze, Orlando 1.4, 1.6, 1.8 and Fiat Croma, Alfa Romeo 159 with 939A4.000 engines
• Applications: Astra-G, Corsa-D, Insignia, Mervia, Signum, Vectra-C & Zafira-B 2003-2011
• Engine timing tool kit for GM engines fitted to Vauxhall/Opel and other vehicles 16v 1.6 and 1.8

• Supplied with a ball inflation needle, presta chuck, inflator nozzle and schrader chuck
• Flexible battery system: works with all MILWAUKEE M12 batteries
• REDLITHIUM battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life (Battery sold separately)
• Nozzle & hose storage, easily stores 66 cm hose and attachments, with an all-brass schrader chuck
• Illuminated LCD display with a digital pressure and fuel gauge that displays remaining charge
• Auto shut-off technology inflates to users pre-selected pressure for highly accurate inflation
• Anti-vibration stand with all rubber feet for no movement while inflating
• High efficiency motor & pump
• Compact lightweight design for fast inflation of car, light truck and compact equipment tires

Safety information

Safety First Read the operating and safety instruction. Follow them carefully. Maximum safe operating pressure 9 bar (125 psi). Air lines are dangerous - use them correctly Putting into service Before use check cap-retaining screws are secure.If the Air tool is dropped check for cracked components. Check air line pressure before connecting the Air tool.The Air tool should be used only by people trained in the use of pneumatically operated tools. Use Keep hands away from moving parts. Never operate the Air tool near the face or body. Only use Air tool to fit CV boots. If air line pressure exceeds 9 bar fit a regulator. Disconnect the Air tool from the air supply after use.

Installation Information

Operation: 1. Slide boot onto arms, large end first. The arms should just protrude from the small end of the boot. To fit a boot to an inner joint, turn the boot inside out before sliding i onto the Airtools´s arm. 2. Press " + " button until arms open enough to pass over the joint. Keep hands clear of moving parts. The air line can now be disconnected. The arms will remain open until the " - " button is pressed. 3. Place Airtool over CV joint and press release button (" -"). Keep hands away from moving parts. 4. Withdraw the Airtool, leaving the boot in position. Complete the installation in the normal way.

• Precision machined joint for maximum power transmission with optimum leverage for easy and effortless work.
• Induction hardened cutting edges to cut even the hardest of materials.
• Steel blades are fully forged, hardened and tempered for best durability. Grey titanium surface finish is non reflective and ensures maximum corrosion resistance.
• VDE (DIN EN/IEC 60900) certified tools. Tested to 10,000 volts and guaranteed to 1,000 volts. Tested against cold to -40°.
• Ergonomic grip with softgrip for comfortable handling and good grip.

General Information

High Voltage Floor Matting - 1 Metre. High Voltage Floor Matting - 1 Metre

• Flame retardant oil and acid resistant insulated floor matting
• Tested to IEC611111 Class 2 rated for working voltages up to 17kV
• Ribbed on the underside fabric impression on upper side

• Dimensions: Width 1000mm, Thickness 3.00mm, Weight 4.0kgs per metre

General Information

Vibration Damper Pulley Puller - Ford 2.0 Ecoblue TDCi. Vibration Damper Pulley Puller - Ford 2.0 Ecoblue TDCi

• Performs the function of OEM 205-295 (puller), 204-158-01 (crankshaft nose protector spigot) for the applications listed only
• Application: Ford Transit, Transit Custom and Tourneo Custom Ecoblue TDCi, AWD, FWD, RWD 2016 onwards Engine codes: YLFS, YMFS, YNFS, YLF6, YMF6, YNR6, YMR6, YLR6, YNF6
• Removes the front pulley to gain access to the timing belt area

• NCCJ500-W - Wheel Replacement
• NCCJ500-S - Saddle Replacement
• NCCJ500-P - Hydraulic Pump Replacement
• NCCJ500-FP - Foot Pedal Replacement

General Information

Crankshaft Locking Kit - Ford 2.2. Crankshaft Locking Kit - Ford 2.2

• Applications: Econetic and HDT engines
• Used to lock and time the crankshaft and flywheel to allow the TDC sensor position to be set after removal when servicing the cam chain drive system
• Ford Transit 2.2 2006<
• TDCI crankshaft locking kit

General Information

Engine Timing Kit - Vauxhall/Opel 1.0/1.4 Petrol Engine Timing Kit - Vauxhall/Opel 1.0/1.4 Petrol.

• Made in Sheffield
• Year 2014-2017
• Equivalent to OEM EN-51367, EN-51298, EN-51632
• Engine codes: 1.0lt LE1/B10XFL,B10XFT, B10XHT AND 1.4LT LV7/B14XE, LE2/B14XHL, B14XHT
• Applications: Vauxhall/Opel Adam Astra-K, Corsa-E Turbo SIDI, EcoFlex, Turbo

• Interior organiser trays.
• Metal reinforced locking point.
• Constructed with impact resistant polymers for jobsite durability.
• Metal reinforced top handle for easier carrying (only on the large box).
• IP65 rated weather seal to keep out rain and jobsite debris.
• Metal reinforced corners.
• Part of the PACKOUT™ modular storage system.
• Mounting location for the ONE-KEY™ TICK ™.

• Impact rated socket extensions for facilitated bolt access in restricted areas.
• SHOCKWAVE IMPACT DUTY steel (chrome-molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Deep wall construction provides clearance for protruding bolts.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Type M: Cone for angled edges and narrow contours.
• Type H: Flame for contouring.
• Type D: Ball for milling holes and creating concave cuts.
• Type C: Cylindrical ball nose for top and side cutting.
• Includes: Types B ,C ,D, H, M.
• Suitable for unhardened and hardened steel, cast iron and non ferrous metals (aluminium, brass, copper).
• Double cut toothing geometry ensures excellent material removal, low vibrations for easier handling and smaller swarfs.
• According to DIN 8033.

General Information

Diesel Injector Remover - VAG TDi

• No solenoid removal required
• Use in accordance with OEM instructions
• Equivalent to: OEM T10402, T10415
• Engines: 1.6L TDi CR diesel & 2.0L TDi
• Applications: Volkswagen Golf 2009, Seat Ibiza 2008, Altea 2009, Leon 2009, Altea XL 2009, Altea Freetrack 2009, Toledo 2013 and Audi A3 2009/2013
• Diesel injector remover for VAG vehicles fitted with 1.6 & 2.0 CR TDi engines

• Accepts higher feed pressure and torque equalling less breakages.
• Impact resistant ABS case with added rubber corner protection.
• Polished finish reduces friction and extends drill bit life.
• 135° Split point - Precision starting, drill bit won't walk on material surface.
• Flute geometry - THUNDERWEB flute form ejects hot chips rapidly. Dissipates heat better increasing life time.
• Parabolic web cross section: Large web thickness. Strength built in.
• THUNDERWEB design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the THUNDERWEB core is thicker than that of

• Flexible battery system: works with all MILWAUKEE M18 batteries
• REDLITHIUM battery pack provides superior pack construction electronics and fade-free performance to deliver more run time and more work over pack life
• Integrated LED light to illuminate the work area
• Supplied with 2x nozzles: 1x reduction nozzle for heat intensity on a specific area 1x reflector nozzle to apply heat around an object such as pipes
• Durable ladder hook for work space management and safety
• Individual battery cell monitoring optimises tool run time and ensures long term pack durability
• REDLINK overload protection electronics in tool and battery pack deliver best in class system durability
• Reaches operational temperature in six seconds allowing the user to quickly complete his application
• High performance heat coil allows the tool to reach 470 C

• Permanent visible ID markings allows for quick tool identification
• Comfortable Tri-Lobe handle optimized for maximum user comfort and high torque applications
• Slim shank diameter for access to low lying screw applications
• VDE tested to 10000 V and guaranteed to 1000 V

• Supplied with polishing pad, sanding pad, polishing sponge white, polishing sponge yellow, lambswool, side handle
• Flexible battery system: works with all MILWAUKEE M12 batteries
• REDLITHIUM battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life
• Individual battery cell monitoring optimises tool run time and ensures long term pack durability
• Detachable 2 position side handle
• Spindle lock allows fast, tool free accessory change
• Compact design with only 130 mm allows access to hard areas
• Long run time allows frequent task completion with one battery charge
• Large capacity of 76 mm polishing sponge and 50 mm sanding pad size for fast job completion
• REDLINK overload protection electronics in tool and battery pack deliver best in class system durability
• Variable 2 speed selection (0-2800 / 0-8300 RPM) for both polishing and sanding applications

• SHOCKWAVE™ IMPACT DUTY Screwdriver bits
• Comfortable Tri-Lobe screwdriver handle optimised for maximum user comfort and high torque applications.
• Sockets are stamped with measurements on the flat side for easy-to-read visibility.
• FOUR FLAT™ sides on socket deter rolling.
• 90 tooth design with 4 °of arc swing for tight work spaces.

• Slim profile head with flush direction lever offers better accessibility.
• FOUR FLAT™ sides on socket deter rolling.
• All metal design for maximum durabilty.
• Sockets are stamped with measurements on the flat side for easy-to-read visibility.
• Comes with a removable inner tray perfectly designed to be stored.
• 90 tooth design with 4 °of arc swing for tight work spaces.