Workshop Tools

General Information

Engine Timing Tool Kit - for VAG 1.0, 1.2, 1.4L

General Information

EU Registered Design

General Information

Fuel Filter Wrench 88mm x 15 Flats

• Pressed steel construction
• Equivalent to Honda OEM 070AA-RL00200
• 88mm (point to flat) x 15 flutes 3/8”D
• Applications include: Honda I-dtec diesel fuel filter
• Also suitable for oil filter removal where dimensions match (Hyundai/Kia 3.3 and 3.8 V6 petrol)

General Information

Insulated Safety Clamp 1000v

• Dimensions: Length 140mm
• For use with insulated shrouding to hold the shroud in situ
• Jaw opening 45mm
• Rubber contacts in the jaw protect the insulating shroud
• Weight 52 grams

General Information

High Voltage Floor Matting - 1 Metre. High Voltage Floor Matting - 1 Metre

• Flame retardant oil and acid resistant insulated floor matting
• Tested to IEC611111 Class 2 rated for working voltages up to 17kV
• Ribbed on the underside fabric impression on upper side

• Dimensions: Width 1000mm, Thickness 3.00mm, Weight 4.0kgs per metre

General Information

Glove Storage Bag. Glove Storage Bag

General Information

Cable End Shroud with Grip Collar - 15mm. Cable End Shroud with Grip Collar - 15mm

• 15mm diameter opening x 100mm length
• Also available: 25mm x 110mm length and 35mm x 130mm length
• Flexible gripping collar prevents damage to the cable insulation
• Push on shrouds for un-insulated cable ends - 1000v insulated
• Will also fit over cable connectors and lugs

General Information

Cable End Shroud with Grip Collar - 35mm. Cable End Shroud with Grip Collar - 35mm

• 35mm diameter x 130mm length
• Also available: 15mm x 100mm length and 25mm x 110mm length
• Flexible gripping collar prevents damage to the cable insulation
• Push on shrouds for un-insulated cable ends - 1000v insulated
• Will also fit over cable connectors and lugs

General Information

Protective Faceshield Bag. Protective Faceshield Bag

General Information

Plastic 6mm Chain 25mtrs. Plastic 6mm Chain 25mtrs

• Chain size 6mm x 25mtrs
• Red and White for high visibility
• Use with Laser Posts and Bases - Part 6643/6644

General Information

Glow Plug Socket Set 1/4"D 3pc Glow Plug Socket Set 1/4"D 3pc.

• Sizes: 8mm, 9mm, 10mm
• Features 1/4in. Drive and universal joint
• Manufactured from Chrome Vanadium
• Super slim for improved access in tight areas

General Information

Spanner Extension Wrench Spanner Extension Wrench.

• Gloves and goggles should be used in high powered situations
• Manufactured from Chrome Vanadium with high Chromed finish
• Universal use
• Length 385mm
• Extends the length of spanners when you need more leverage

• Manufactured from Chrome Vanadium
• 6pt (Single Hex)
• 1/2in. Drive
• For use with Air Impact Tools

General Information

Rear Swinging Arm Bush Tool - for Ford

• Designed and manufactured in Sheffield
• Force Screw replacement Part No: Laser 1319, Nut Assembly replacement - Laser 1803
• Supplied with Molybdenum Disulphide grease for extended force screw life
• Designed to be used on car with the minimal strip down reducing the time taken to replace worn bushes (Bush Nos: 1 535 296/1 805 815)
• Application Ford Fiesta MK VI 2008 onwards

• Bush Nos: 1 535 296/1 805 815

General Information

Flameless Hot Air Blower. Flameless Hot Air Blower

• Net weight without gas 68 grams. Dimensions 110 x 27 x 85mm
• Fueled by 5.5ml butane gas which is available from newsagents and supermarkets (cigarette lighter gas)
• Includes heat shrinking tubes
• Run time approximately 20-25 minutes (at mid setting)
• Variable heat/temperature range up to 650 degrees C
• Features: Instant electronic ignition, refillable tank with see through window, stable catalytic heating system. Stable catalystic heating system

• Variable heat/temperature range up to 650 degrees C
• Run time approximately 20-25 minute
• Net weight without gas 68 grams
• Dimensions 110 x 27 x 85mm

General Information

Cambelt Timing Tool Kit Ford 1.0GTDI Cambelt Timing Tool Kit Ford 1.0GTDI.

• Made in Sheffield
• Camshaft Locking blocks are EU Registered design
• Where the VCT pulleys require removing or setting the additional kit Part 6291 will be required

• Applications: Ford 1.0lt 3cyl Turbo charged EcoBoost engine from 2012<
• Equivalent to OEM 303-732, 303-1054, 303-1602, 303-1603, 303-1604, 303-1605/1, 303-1605/2
• GTDi engines found in Ford B-Max, C-Max, Fiesta, Focus, Grand C-Max, Transit Connect

General Information

Oil Filter Wrench Set 3/8"D 2pc

General Information

Sharks Teeth Spanner Organiser - 20 Spanners

• 420mm long (595mm version available - Part No 6976)
• Two individual strips for spanner length selection
• Holds 20 Spanners
• Manufactured from composite material with adhesive strips
• Ideal for organising tool cabinet drawers
• Sharks teeth spanner organiser takes 20 spanners 420mm long

General Information

Sharks Teeth Spanner Organiser - 35 Spanners

General Information

Budd Wheel Nut Socket 21mm Sq. Budd Wheel Nut Socket 21mm Sq

• Suitable for front and rear axle wheels on many imported trucks including Isuzu, Mitsubishi Fuso and Hino
• Impact quality manufactured from Chrome Molybdenum with black phosphate finish
• Extra deep design allows removal of stud and nut
• Length 90mm x 3/4in.D
• Budd wheel nut socket 21mm square (4pt)

General Information

Difficult Access Funnel

• Manufactured from PP Plastic
• Car and van applications include: Brake Master Cylinders on Ford Mondeo, Ford Transit, Vauxhall Insignia & Vauxhall Corsa
• Angled access - reach 240mm
• Funnel diameter 145mm x 135mm deep
• Cranked spout for easy access on dificult to reach filling points on brake master cylinders and motorcycle engine oil fillers