Workshop Tools

• Contents include 5 x 1/4in. Drive UJ Sockets: E4, E5, E6, E7, E8 x 40mm long
• 4 x 3/8in. Drive: E10, E12, E14, E16 x 60mm long
• Manufactured from Chrome Molybdenum
• Fully polished finish
• Supplied in EVA foam with clear lid

General Information

Pulley Holding Tool Set - VAG

• Complete set of adaptors including 4.8mm, 6mm, square 15mm x 6mm, square 15mm x 12mm, cup 13mm x 17mm , cup 16mm x 20mm, Spline M10, M12
• Equivalent to OEM tools T10172A (T10172) and T10554
• Designed to hold camshaft, crankshaft, oil pump and water pump pulleys and sprockets while loosening and tightening the fixing bolts

General Information

Hex Bit 11mm 1/2"D

• Socket manufactured from chrome vanadium
• Bit manufactured from silicon steel
• 1/2in. D x 55mm long
• Application: brake caliper bolts on Ford Focus/Edge plus Mercedes Benz/Volvo

General Information

Vibration Damper Pulley Puller - Ford 2.0 Ecoblue TDCi. Vibration Damper Pulley Puller - Ford 2.0 Ecoblue TDCi

• Performs the function of OEM 205-295 (puller), 204-158-01 (crankshaft nose protector spigot) for the applications listed only
• Application: Ford Transit, Transit Custom and Tourneo Custom Ecoblue TDCi, AWD, FWD, RWD 2016 onwards Engine codes: YLFS, YMFS, YNFS, YLF6, YMF6, YNR6, YMR6, YLR6, YNF6
• Removes the front pulley to gain access to the timing belt area

• Ideal for a wide variety of trades including automotive, electronics, computers, modelling etc.
• Small size makes it suitable for many fixings
• 40mm diameter magnet with magnetic power 1000-1200 GAUSS
• Manufactured from stainless steel with PVC base to prevent scratching
• Size: 64mm x 93mm x 14mm deep

General Information

Diesel Injector Remover - VAG TDi

• No solenoid removal required
• Use in accordance with OEM instructions
• Equivalent to: OEM T10402, T10415
• Engines: 1.6L TDi CR diesel & 2.0L TDi
• Applications: Volkswagen Golf 2009, Seat Ibiza 2008, Altea 2009, Leon 2009, Altea XL 2009, Altea Freetrack 2009, Toledo 2013 and Audi A3 2009/2013
• Diesel injector remover for VAG vehicles fitted with 1.6 & 2.0 CR TDi engines

• Ratcheting, self adjusting mini brake pipe cutter ideal for restricted access
• 4.75mm (3/16in.) with ratchet handle
• Automatic self adjusting for faster cutting
• Extra leverage due to handle length over standard cutter. To further increase leverage use the ¼” drive square in the end of the handle
• Fast and accurate operation, ideal for under vehicle use

General Information

Steering Wheel Lockout Cover 500mm

General Information

Brake Caliper Cleaning File Double Sided

• Workshop manual must be consulted when using this tool
• Suitable for Volkswagen and Audi vehicles
• Composite handle
• Assembly lever for use on DSG gear boxes
• Designed for DSG 7 speed dual clutch gearboxes fitted to VAG vehicles

• Flexible battery system: works with all MILWAUKEE® M18™ batteries
• The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering outstanding power, run time and durability
• Mode 4 bolt removal, provides maximum nut-busting torque then shifts to 750 rpm for outstanding control when removing fasteners
• 4-Mode DRIVE CONTROL allows the user to shift into four different speed and torque settings to maximise application versatility
• Tri-LEDs deliver high-definition lighting to increase workspace visibility
• Robust gearcase for more durability
• Our battery isolation system provides a secure battery connection and controls vibration transmitted to the pack
• 2000 RPMs of no load speed to perform your task 35% faster than with the previous gen
• Great power density: the M18 FUEL™ high torque impact wrench delivers 1491 Nm fastening torque and 2034 Nm of nut-busting torque in a compact size of 193 mm, which gives more access in tight spaces

• Ideal For Multiple Uses Indoors & Out
• Dries the surface in half the time
• Fast removal of water in one easy pass
• Will not scratch
• Moulds to almost any contour
• Soft silicone flexible blade
• Whisks away surplus water
• T shaped blade

• Fits MOGG 57
• To prevent sponge, chamois or cloth contamination of grit before using on vehicle bodywork
• Fits most standard 15L buckets
• 235 mm

• fits 235mm 15L buckets
• Plastic bucket barrier

• Comes with full spares support
• Great for cleaning windows, bathroom surfaces and fixtures, furniture and upholstery, vehicle windshields and windows
• Ideal for professionals such as cleaning companies and car washes but also perfect for use around the house
• Industry approved ‘Viton’ seals for water based h.d. chemicals in a trade environment

• White trigger head
• Resistant to general chemicals
• Canyon trigger and bottle

• plastic 600ml bottle
• White plastic trigger

Maypole’s flux cored Mig welding wire is suitable for these types of situations. Flux cored wire is not only an economical solution for those of you who only weld on the odd occasion, but it is also the perfect solution for outdoor welding as it will still work flawlessly even in light winds which is not possible when using gas. This spool comes with 0.4kg of flux cored steel wire and is 0.9mm thick.

Established in 1969, Birmingham based company Maypole has a long heritage in the manufacture and supply to customers in the automotive, trailer, leisure and agricultural markets. For over 40 years Maypole have been manufacturing and supplying its products to its ever growing network of customers and are proud to continue to add to their ever increasing portfolio of products.

Maypole’s flux cored Mig welding wire is suitable for these types of situations. Flux cored wire is not only an economical solution for those of you who only weld on the odd occasion, but it is also the perfect solution for outdoor welding as it will still work flawlessly even in light winds which isn’t possible when using gas. This spool comes with 0.4kg of flux cored steel wire and is 0.8mm thick.

Established in 1969, Birmingham based company Maypole has a long heritage in the manufacture and supply to customers in the automotive, trailer, leisure and agricultural markets. For over 40 years Maypole have been manufacturing and supplying its products to its ever growing network of customers and are proud to continue to add to their ever increasing portfolio of products.

To solve this problem Maypole now supply a range of replacement gas cylinders suitable for use with most models of mini Mig welder; for welding with aluminium, mild or stainless steel. This Carbon Dioxide (CO2) cylinder from Maypole is suitable for welding with mild steel only. The gas comes in an easy to fit, disposable, pressurised canister, which should be disposed of with other ferrous metals. The gas cylinder also comes with full fitting and usage instructions.

Established in 1969, Birmingham based company Maypole has a long heritage in the manufacture and supply to customers in the automotive, trailer, leisure and agricultural markets. For over 40 years Maypole have been manufacturing and supplying its products to its ever growing network of customers and are proud to continue to add to their ever increasing portfolio of products.

• Mig Welder Co2 Cylinder.
• Pressurised, disposable gas cylinder
• For welding mild steel
• Welding duration approx 1 hour