Workshop Tools

• Flexible battery system: works with all MILWAUKEE® M18™ batteries
• The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering outstanding power, run time and durability
• Mode 4 bolt removal, provides maximum nut-busting torque then shifts to 750 rpm for outstanding control when removing fasteners
• 4-Mode DRIVE CONTROL allows the user to shift into four different speed and torque settings to maximise application versatility
• Tri-LEDs deliver high-definition lighting to increase workspace visibility
• Robust gearcase for more durability
• Our battery isolation system provides a secure battery connection and controls vibration transmitted to the pack
• 2000 RPMs of no load speed to perform your task 35% faster than with the previous gen
• Great power density: the M18 FUEL™ high torque impact wrench delivers 1491 Nm fastening torque and 2034 Nm of nut-busting torque in a compact size of 193 mm, which gives more access in tight spaces

• Ideal For Multiple Uses Indoors & Out
• Dries the surface in half the time
• Fast removal of water in one easy pass
• Will not scratch
• Moulds to almost any contour
• Soft silicone flexible blade
• Whisks away surplus water
• T shaped blade

• Fits MOGG 57
• To prevent sponge, chamois or cloth contamination of grit before using on vehicle bodywork
• Fits most standard 15L buckets
• 235 mm

• fits 235mm 15L buckets
• Plastic bucket barrier

• Comes with full spares support
• Great for cleaning windows, bathroom surfaces and fixtures, furniture and upholstery, vehicle windshields and windows
• Ideal for professionals such as cleaning companies and car washes but also perfect for use around the house
• Industry approved ‘Viton’ seals for water based h.d. chemicals in a trade environment

• White trigger head
• Resistant to general chemicals
• Canyon trigger and bottle

• plastic 600ml bottle
• White plastic trigger

Maypole’s flux cored Mig welding wire is suitable for these types of situations. Flux cored wire is not only an economical solution for those of you who only weld on the odd occasion, but it is also the perfect solution for outdoor welding as it will still work flawlessly even in light winds which is not possible when using gas. This spool comes with 0.4kg of flux cored steel wire and is 0.9mm thick.

Established in 1969, Birmingham based company Maypole has a long heritage in the manufacture and supply to customers in the automotive, trailer, leisure and agricultural markets. For over 40 years Maypole have been manufacturing and supplying its products to its ever growing network of customers and are proud to continue to add to their ever increasing portfolio of products.

Maypole’s flux cored Mig welding wire is suitable for these types of situations. Flux cored wire is not only an economical solution for those of you who only weld on the odd occasion, but it is also the perfect solution for outdoor welding as it will still work flawlessly even in light winds which isn’t possible when using gas. This spool comes with 0.4kg of flux cored steel wire and is 0.8mm thick.

Established in 1969, Birmingham based company Maypole has a long heritage in the manufacture and supply to customers in the automotive, trailer, leisure and agricultural markets. For over 40 years Maypole have been manufacturing and supplying its products to its ever growing network of customers and are proud to continue to add to their ever increasing portfolio of products.

To solve this problem Maypole now supply a range of replacement gas cylinders suitable for use with most models of mini Mig welder; for welding with aluminium, mild or stainless steel. This Carbon Dioxide (CO2) cylinder from Maypole is suitable for welding with mild steel only. The gas comes in an easy to fit, disposable, pressurised canister, which should be disposed of with other ferrous metals. The gas cylinder also comes with full fitting and usage instructions.

Established in 1969, Birmingham based company Maypole has a long heritage in the manufacture and supply to customers in the automotive, trailer, leisure and agricultural markets. For over 40 years Maypole have been manufacturing and supplying its products to its ever growing network of customers and are proud to continue to add to their ever increasing portfolio of products.

• Mig Welder Co2 Cylinder.
• Pressurised, disposable gas cylinder
• For welding mild steel
• Welding duration approx 1 hour

Maypole’s mild steel welding wire is suitable for use with Mig welders. This particular wire is designed for use when welding with gas, including any of the following: CO2, Argon or a CO2 and Argon mix. This reel of wire is 0.6mm thick and 0.7kg in weight.

Established in 1969, Birmingham based company Maypole has a long heritage in the manufacture and supply to customers in the automotive, trailer, leisure and agricultural markets. For over 40 years Maypole have been manufacturing and supplying its products to its ever growing network of customers and are proud to continue to add to their ever increasing portfolio of products.

• Mild Steel Mig Welding Wire (0.6mm/0.7Kg)
• Copper coated
• Comes in a wound spool

The Maypole Caravan Leg Winding Brace Extended Socket Is a 50cm extension Ideal For Winding Caravan Steadies Or Standard 19mm Car Wheel Nuts Where Easy To Access (Not Where Sunken In Alloy Wheels).

Maypole are the UK's leading manufacturer of high quality towing, trailer and related leisure products. Based in Birmingham with over 40 years of experience, they are a trusted and well-known brand for their products. With over 2000 lines currently, Maypole is using their knowledge and expertise in making new and innovative products and solutions which are helping their customers. From electrical cabling, to electrical winches, and even ice scrapper, Maypole has tried to cater for the Travel and leisure markets in the UK.

• Socket suits 10mm drill chucks
• 19mm extended socket for caravan leg winding

For those of you with a compressed air canister you may be just one step away from having your own air pressure gauge and tyre inflator at home or in the work place. This Tyre Inflator Gun from Maypole is just one of the options from their range compressor accessories and can be quickly and easily connected to the air outlet pipe to be ready for use. It comes with an analogue readout which measures in both PSI and BAR and all the connectors and adapters that you will need to connect up to your air canister.

Established in 1969, Birmingham based company Maypole has a long heritage in the manufacture and marketing of products to customers in the automotive, trailer, leisure and agricultural markets. For over 40 years Maypole have been manufacturing and supplying its products to its ever growing network of customers and are proud to continue to add to their ever increasing portfolio of products.

• Powerful tyre inflator
• Designed for use with air compressors
• Measures in PSI & BAR
• Comes with built in pressure gauge
• Maypole Tyre Inflator Gun

• 1/4 BSP fitting
• Tyre chuck connection with 350mm rubber hose
• Robust pressure gauge with four scales 0-220PSI/ 0-15BAR / 0-15kg/cm2 / 0-1500 kPa
• Die-cast metal body

• 1/4 BSP fitting
• 150mm nozzle
• Constructed from tough nylon plastic complete with steel nozzle
• The trigger allows you to regulate the amount of air flow giving you greater control
• Useful for removing dust, swarf and residue from accessible or hidden areas

• Compatible with most 1L coating tins
• 1/4in. BSP air fitting
• Supplied with detachable 60cm wax injector probe
• Max pressure 10 bar / 150 psi
• Air pressure 3-8 bar / 45-120 psi
• Ideal for applying many types of coatings including anti-stone chip, Schutz, underbody sealant and wax-oil to help protect from rust corrosion

• Stainless steel needle and nozzle
• Pressure trigger and air control screw
• Cup Capacity: 600ml
• Air Consumption: 7 CFM
• Air pressure: 3BAR / 50PSI
• Gravity fed spray gun

• Stainless steel needle and nozzle
• Pressure trigger and air control screw
• Cup Capacity: 600ml
• Air Consumption: 15 CFM
• Air pressure: 3 BAR / 50PSI

• Resistant to oil, grease and most similar contaminants
• Max working pressure 200PSI
• Fitted with the standard 1/4in. BSP female swivel nuts
• Recoils when slack to help keep work areas tidy
• Coiled high strength, flexible UPVC hose

• Two delivery tubes included - angled steel tube and flexible tube
• Standard 400g cartridge
• 3-way filling operation, standard 400g cartridge, suction or bulk fill up to 500cc
• Heavy duty manual grease gun

The Maypole Single Barrel Foot Pump is just one of the options from their range of portable foot pumps. It has superior performance up to 100psi, comes with an analogue readout which measures in both PSI and BAR and all the connectors and adapters that you will need to inflate not only your tyres but also a wide range of other inflatables including sports equipment, balls and toys. The pump is quick and easy to use, is compact for easy storage and comes with an ergonomic rubberised tread plate.

Maypole are the UK's leading manufacturer of high quality towing, trailer and related leisure products. Based in Birmingham with over 40 years of experience, they are a trusted and well-known brand for their products. With over 2000 lines currently, Maypole is using their knowledge and expertise in making new and innovative products and solutions which are helping their customers. From electrical cabling, to electrical winches, and even ice scrappers, Maypole has tried to cater for the Travel and leisure markets in the UK.

• Non slip footplate
• Locks down for easy storage
• Locking valve connector
• Supplied with 3 additional nozzle adaptors
• TUV/GS approved
• Heavy duty single footpump

The Maypole Double Barrel Foot Pump is just one of the options from their range of portable foot pumps. It has superior performance up to 100psi, comes with an analogue readout which measures in both PSI and BAR and all the connectors and adapters that you will need to inflate not only your tyres but also a wide range of other inflatables including sports equipment, balls and toys. The pump is quick and easy to use, is compact for easy storage and comes with an ergonomic rubberised tread plate.

Maypole are the UK's leading manufacturer of high quality towing, trailer and related leisure products. Based in Birmingham with over 40 years of experience, they are a trusted and well-known brand for their products. With over 2000 lines currently, Maypole is using their knowledge and expertise in making new and innovative products and solutions which are helping their customers. From electrical cabling, to electrical winches, and even ice scrappers, Maypole has tried to cater for the Travel and leisure markets in the UK.

• 60cm Hose with adapters
• Superior performance to 100psi
• Ergonomic rubber coated tread plate
• Due to its size, the foot pump is easy to store and very easy to use
• Ideal for the quick and easy inflation of a variety of products including car tyres, bicycle tyres, motorcycle tyres, sports balls, air beds, etc.
• Double barrel, heavy duty footpump

• Air flow rate - 12L/min
• Max wattage - 100W
• Max amperage - 8A
• 12V DC power supply - plugs directly into cigarette lighter socket 
• Handy accessory holder - air bed adaptor, ball adaptor and tyre valve adaptor
• Compact hose and power cord storage - air hose -50cm, power cord - 3m
• Max pressure range - 0-150PSI
• Quick release connector valve 
• Multiple adaptors included 
• Portable and compact
• Super bright LED night light
• Large precision analogue display (PSI/Bar)
• High speed inflation - 3.5 mins (0-36PSI/175/65/R14)

• Air flow rate - 12L/min
• Max wattage - 100W
• Max amperage - 8A
• 12V DC power supply - plugs directly into cagarette lighter socket 
• Handy accessory holder - air bed adaptor, ball adaptor and tyre valve adaptor
• Compact hose and power cord storage - air hose -50cm, power cord - 3m
• Max pressure range - 0-150PSI
• Quick release connector valve 
• Multiple adaptors included 
• Portable and compact
• Automatic pre-set shut off 
• Super bright LED night light
• Large precision digital display
• High speed inflation - 3.5 mins (0-36PSI/175/65/R14)

• 12v DC power supply - plugs directly into cigar lighter socket 
• Handy accessory holder - air bed adaptor, ball adaptor and tyre valve adaptor
• Compact hose and power cord storage - air hose -50cm, power cord - 3m
• Max pressure range - 0-150PSI
• Quick release connector valve 
• Multiple adaptors included 
• Portable and compact
• Practical handheld design
• Super bright LED night light
• Large precision analogue display (PSI/Bar)
• High speed inflation - 3.5 mins (0-36PSI/175/65/R14)
• Essential for your safety and fuel efficiency
• 12v handheld analogue compressor with LED light can maintain and monitor tyre pressure anywhere and anytime

• 12v DC power supply - plugs directly into cigar lighter socket 
• Handy accessory holder for 4 accessories
• Compact hose and power cord storage - air hose -50cm, power cord - 3m
• Max pressure range - 0-150PSI
• Quick release connector valve 
• Multiple adaptors included 
• Portable and compact
• Includes bag
• Anti-vibration rubber mounted feet 
• Heavy duty metal cylinder
• Suitable for large cars and 4x4s
• Large precision analogue display (PSI/Bar)
• High speed inflation - 2.5 mins (0-36PSI/175/65/R14)
• Essential for your safety and fuel efficiency
• 12v rapid 4x4 analogue metal compressor can maintain and monitor tyre pressure anywhere and anytime

• 1.6 mm thick blade resists bending reduces vibration and blate flattering at speed.
• Teeth are hardened and triple sharpened for a super sharp splinter free clean cut.
• 3x faster aggressive triple sharpened tooth geometry for speed and splinter free cuts.

• 1.6 mm thick blade resists bending reduces vibration and blate flattering at speed.
• Teeth are hardened and triple sharpened for a super sharp splinter free clean cut.
• 3x faster aggressive triple sharpened tooth geometry for speed and splinter free cuts.

• Bi-metal quality cutting teeth with 8% cobalt giving the ultimate in performance and lifetime.
• Improved tooth geometry for best speed and double the lifetime.
• Slim 0.90 mm thick blade body optimised for maximum speed and flexibility.
• TOUGH NECK: Stamped indentations around the reception strengthens the blade at its weakest point.

• Constructed with a 8 Tpi design for fast starts and smooth cuts large gullets for easy chip ejection and a unique carbide blend the TORCH Blades with NITRUS CARBIDE are designed to last the longest and cut the fastest in cast iron / SML pipe and other thi
• This special carbide NITRUS blend is designed to cut 3x longer than existing standard carbide teeth blades.
• Best performance in all thick metals and especially cast iron soil waste and drainage pipes
• 25 mm blade height for improved stability and minimum vibration.
• The TORCH blades with NITRUS CARBIDE teeth is the next generation of carbide technology.
• Thick 1.27 mm robust blade body for precise straight cuts.

• Constructed with a 8 Tpi design for fast starts and smooth cuts large gullets for easy chip ejection and a unique carbide blend the TORCH Blades with NITRUS CARBIDE are designed to last the longest and cut the fastest in cast iron / SML pipe and other thi
• This special carbide NITRUS blend is designed to cut 3x longer than existing standard carbide teeth blades.
• Best performance in all thick metals and especially cast iron soil waste and drainage pipes
• 25 mm blade height for improved stability and minimum vibration.
• The TORCH blades with NITRUS CARBIDE teeth is the next generation of carbide technology.
• Thick 1.27 mm robust blade body for precise straight cuts.

• Compact design ideal for versatile cutting in tight spaces.
• Rubber overmold grip for increased comfort.
• Adjustable blade length for easier flush cutting.
• Supplied with 10″ / 24 Tpi blade.
• Accepts 12″ blades.
• Tool free blade change for changing blades up to 10x faster.

• Internal blade storage for extra blades.
• Supplied with 12″ / 24 Tpi blade.
• Tough metal frame, supports higher tension (25,000 PSi / 250 lbs).
• Will accept up to 12″ blades.
• Overmould handle ensures secure grip and user comfort.

• Acrylic nib ideal for rough surfaces such as OSB and concrete.
• Lanyard hole e.g. to attach the INKZALL highlighters to the belt.
• Easy open cap for one hand operation.
• Marker continues to write after 72+ hours of cap off time.
• Quick dry time – reduced smearing markings on PVC metal surfaces.
• Can be used on wet oily dusty rusty with debris surfaces.
• Helmet clip – can be clipped to the construction site cap trousers overalls.
• Thin body for use in restricted areas.
• For use on concrete wood metal plywood OSB plastic.
• Stays sharp doesn't mushroom or push back under pressure.

• Durable acrylic nib for the most demanding environmental conditions: surface temperature from -10dgup to + 145°.
• Xylene-free paint.
• Metal barrel for construction site durability.
• Marks on dark surfaces where traditional markers would not be easily visible.
• 10 seconds dry time.
• For use on concrete black pipe aluminium PVC steel & stainless steel rubber and tyres.
• Permanent markers. Markings last up to 6 months.
• Can be used on rough dirty and greasy surfaces.
• Water and UV resistant markings.
• Valve action marker.
• IMPORTANT: Shake the marker with the cap on. Remove the cap and carefully pump it up and down until ink flows into the nib.

• One hand locking mechanism.
• Made from forged alloy steel for best durability – Cr Steel.
• Less hand fatigue when cutting thicker materials. Design with compound leverage action.
• Aviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.
• Ergonomic and durable overmoulded grips add comfort and last longer.
• Triple cutting direction identification – on the head, handle and by colour coded handle.
• Torsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.
• Thumb and forefinger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.
• Extra long aviation snips: For longer and straighter cuts in one go.
• Offset snips: For long continuous straight or curved cuts. 45° offset keeps users hand away from the cutting material.
• Chrome plated rust protected forged blades for increased lifetime. Extra hardened to 65 HRC.
• Serrated cutting edges prevent slippage when cutting.
• Flush slimline design for non-snagging in material.

• One hand locking mechanism.
• Made from forged alloy steel for best durability – Cr Steel.
• Less hand fatigue when cutting thicker materials. Design with compound leverage action.
• Aviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.
• Ergonomic and durable overmoulded grips add comfort and last longer.
• Triple cutting direction identification – on the head, handle and by colour coded handle.
• Torsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.
• Thumb and forefinger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.
• Extra long aviation snips: For longer and straighter cuts in one go.
• Offset snips: For long continuous straight or curved cuts. 45° offset keeps users hand away from the cutting material.
• Chrome plated rust protected forged blades for increased lifetime. Extra hardened to 65 HRC.
• Serrated cutting edges prevent slippage when cutting.
• Flush slimline design for non-snagging in material.

• One hand locking mechanism.
• Made from forged alloy steel for best durability – Cr Steel.
• Less hand fatigue when cutting thicker materials. Design with compound leverage action.
• Aviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.
• Ergonomic and durable overmoulded grips add comfort and last longer.
• Triple cutting direction identification – on the head, handle and by colour coded handle.
• Torsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.
• Thumb and forefinger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.
• Extra long aviation snips: For longer and straighter cuts in one go.
• Offset snips: For long continuous straight or curved cuts. 45° offset keeps users hand away from the cutting material.
• Chrome plated rust protected forged blades for increased lifetime. Extra hardened to 65 HRC.
• Serrated cutting edges prevent slippage when cutting.
• Flush slimline design for non-snagging in material.

• One hand locking mechanism.
• Made from forged alloy steel for best durability – Cr Steel.
• Less hand fatigue when cutting thicker materials. Design with compound leverage action.
• Aviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.
• Ergonomic and durable overmoulded grips add comfort and last longer.
• Triple cutting direction identification – on the head, handle and by colour coded handle.
• Torsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.
• Thumb and forefinger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.
• Extra long aviation snips: For longer and straighter cuts in one go.
• Offset snips: For long continuous straight or curved cuts. 45° offset keeps users hand away from the cutting material.
• Chrome plated rust protected forged blades for increased lifetime. Extra hardened to 65 HRC.
• Serrated cutting edges prevent slippage when cutting.
• Flush slimline design for non-snagging in material.

• Thumb and four finger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.
• Serrated cutting edges prevent slippage when cutting.
• Less hand fatigue when cutting thicker materials. Design with compound leverage action.
• Torsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.
• Chrome plated rust protected forged blades for increased lifetime. Extra hardened to 65 HRC.
• Made from forged alloy steel for best durability – Cr Steel.
• One hand locking mechanism.
• Flush slimline design for non-snagging in material.
• Triple cutting direction identification – on the head, handle and by colour coded handle.
• Ergonomic and durable overmoulded grips add comfort and last longer.
• Aviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.

• One hand locking mechanism.
• Made from forged alloy steel for best durability – Cr Steel.
• Less hand fatigue when cutting thicker materials. Design with compound leverage action.
• Aviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.
• Ergonomic and durable overmoulded grips add comfort and last longer.
• Triple cutting direction identification – on the head, handle and by colour coded handle.
• Thumb and forefinger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.
• Extra long aviation snips: For longer and straighter cuts in one go.
• Offset snips: For long continuous straight or curved cuts. 45° offset keeps users hand away from the cutting material.
• Chrome plated rust protected forged blades for increased lifetime. Extra hardened to 65 HRC.
• Torsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.
• Serrated cutting edges prevent slippage when cutting.
• Flush slimline design for non-snagging in material.

• Serrated jaws for better grip and excellent control.
• Nail puller.
• Deburrer: Deburring ribs on head for up to 20 mm pipe. No need for extra tools.
• Wire cutter: Cuts wires up to 2.5 mm.
• Long nose pliers: Specially suitable for gripping, bending and adjusting in restricted areas.
• Ergonomic and durable overmolded grips add comfort and last longer.
• Made from Chrome Vanadium for best durability and good rust protection.
• Laser hardened durable cutting edges. Extra hardened to 64 HRC.

• Cable diameter (mm): 6
• Cutting capacity in hard wire (mm): 2.5
• Cutting capacity in medium wire (mm): 2.5
• Deburring head max. diameter [mm]: 18
• Jaw length [mm]: 51
• Total length (mm): 210
• Weight (g): 255

• Lanyard hole.
• 8? adjustable wrench (48227508) has an extra wide jaw of 38 mm for increased jaw capacity in confined environments.
• Permanent lasered inch and mm markings for accurate adjustment
• Parallel jaws won't slip or damage finish surfaces.
• Slim head design for reaching into tight spaces.
• Ergonomic rounded handle design for a comfortable fit in the hand and less pressure points on the palm.
• Chrome plating for best-in-class rust protection and increased durability.
• Precision adjustment screw with accurate threads and tight tolerances. The jaws won't back off during use.

• Lanyard hole.
• 8? adjustable wrench (48227508) has an extra wide jaw of 38 mm for increased jaw capacity in confined environments.
• Permanent lasered inch and mm markings for accurate adjustment
• Parallel jaws won't slip or damage finish surfaces.
• Slim head design for reaching into tight spaces.
• Ergonomic rounded handle design for a comfortable fit in the hand and less pressure points on the palm.
• Chrome plating for best-in-class rust protection and increased durability.
• Precision adjustment screw with accurate threads and tight tolerances. The jaws won't back off during use.

• Lanyard hole.
• 8? adjustable wrench (48227508) has an extra wide jaw of 38 mm for increased jaw capacity in confined environments.
• Permanent lasered inch and mm markings for accurate adjustment
• Parallel jaws won't slip or damage finish surfaces.
• Slim head design for reaching into tight spaces.
• Ergonomic rounded handle design for a comfortable fit in the hand and less pressure points on the palm.
• Chrome plating for best-in-class rust protection and increased durability.
• Precision adjustment screw with accurate threads and tight tolerances. The jaws won't back off during use.

• Lanyard hole.
• 8? adjustable wrench (48227508) has an extra wide jaw of 38 mm for increased jaw capacity in confined environments.
• Permanent lasered inch and mm markings for accurate adjustment
• Parallel jaws won't slip or damage finish surfaces.
• Slim head design for reaching into tight spaces.
• Ergonomic rounded handle design for a comfortable fit in the hand and less pressure points on the palm.
• Chrome plating for best-in-class rust protection and increased durability.
• Precision adjustment screw with accurate threads and tight tolerances. The jaws won't back off during use.