Workshop Tools

• Complete with socket rail
• Sizes: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm
• Socket manufactured from Chrome Vanadium, Bit from Silicon Steel

• High quality hot-forging process provides a performance exceeding ASME standard
• High visibility colour filled size mark for easy identification during use
• Heat treated for maximum strength
• Mirror Polish Finish

• ASME Compliant

• Impact rated 6 point chrome molybdenum sockets
• 3 alloy wheel sockets to cover the most popular sizes for a 1/2in. impact wrench
• Storage case complete with individual labelled moulds for each socket size
• All PCL sockets exceed ANSI specifications
• Features two grease rings for superior user grip
• Centre hole is punched through for extra depth on the work surface
• Offers Z-Drive, contacting the flat walls of fasteners for stronger grip
• Thin wall design with chamfered openings for easier mating to fasteners

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

General Information

Socket 3/4"D - 65mm Socket 3/4"D - 65mm.

• Manufactured in Chrome Vanadium
• Introduced specifically for the hub nuts on Transit vans > 1988

• Pressure release function. 45° chuck with 360° swivel, Stainless steel flexi hose (330mm) and rubber boot
• Tyre depth measurement 0- 10mm
• Accuracy plus/minus 3%
• 0-130 psi (0-800kpa) - (1BAR=100kpa)
• Dual faced gauge 50mm diameter

• Normal point shaped cutting tip with 118dg angle.
• High speed steel rollforged metal drill bits produced according to DIN 338.
• Suitable for drilling in steel cast iron alloyed and non-alloyed material up to 800 N/mm².
• Type N flute normal angle.
• Colour: black.
• Oxide coating enables quick swarf removal.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Deep Metric Socket Set
• 6 Points
• Socket set features mirror polish Chrome-Plated finish for rust resistance

• Flexible material allows for easy install and removal.
• Form-fitting lightweight design protects the tool and work surface while adding minimal size or weight to the tool.
• Use on any other product than advised may result in damage to tool motor and may void tool warranty.
• Not for use on or near live electrical circuits.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.

• 15° offset box for better accessibility.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Flexible material allows for easy install and removal.
• Form-fitting lightweight design protects the tool and work surface while adding minimal size or weight to the tool.
• Use on any other product than advised may result in damage to tool motor and may void tool warranty.
• Not for use on or near live electrical circuits.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.

• Flexible material allows for easy install and removal.
• Form-fitting lightweight design protects the tool and work surface while adding minimal size or weight to the tool.
• Use on any other product than advised may result in damage to tool motor and may void tool warranty.
• Not for use on or near live electrical circuits.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.

• The unique single pawl design prevents the Gear from slipping during high-speed turning.
• The ratchet gear mechanism head is and designed with High-grade Cr-MO material, providing extra strength and durability.
• The tool has a Super Rust-Resistant finishing, proven through a Salt Spray Test that lasted over 72 hours.
• The handle features a unique ergonomic design made of two components for enhanced comfort.
• The 120-Tooth reversible ratcheting mechanism allows for a minimal sweep of 3 degrees, enabling usage in tight spots.
• The Heavy Duty New Index Flex head mechanism offers the option to fix the head or use it in a flexed position.

General Information

Socket - Specialist 50mm 1/2"D. Socket - Specialist 50mm 1/2"D

• Chrome Vanadium
• 37mm drive depth, 56mm internal depth, 68mm external diameter
• Specifically introduced for service and maintenance on Renault gearboxes

• Supplied with adapters for cycle tyres, sports balls and inflatables
• 60cm hose with screw-on adapter valve
• Ergonomic rubber tread plate
• Robust, heavyweight construction
• Large LCD digital display
• Dual display in PSI and BAR
• Digital gauge accurate to +/- 1PSI

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

General Information

Deep Impact Socket 3/4"D 32mm

• Manufactured from Chrome Molybdenum
• Available in range 19mm - 46mm
• Deep Impact socket
• Part of a range of Deep Impact Sockets in 3/4in. drive

• 200mm Long Nose Pliers
• 178mm HD Diagonal Pliers
• 250mm Groove Joint Pliers

• Long Nose Pliers offer crosshatch jaw design for stronger grip

General Information

Combination Spanner 33mm Combination Spanner 33mm.

• Satin finished spanner
• Bi-Hex
• Professional combination spanner
• Satin finish
• Manufactured from Chrome Vanadium

• Chrome alloy steel, chrome plated.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Durable double stacked pawls for longer ratchet life.
• 144 Ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.

• CR-V alloy steel for long lasting durability.
• Worldwide patent.
• Meet ANSI, DIN torque spec.
• Processing without tolerance to true present the 90 teeth 4 degrees of operation function.
• Meet DIN torque spec.
• 180 degrees flex head & extra long beam offers extreme reach and loads of leverage.
• Ratcheting box ends are designed to accommodate a variety of fasteners including both 6-and 12-point nuts.
• Reversible wrenches feature an easy-to-use reversing mechanism
• Wrenches feature a sleek, offset-head design for tight access points, slim dimensions for confined areas.

• Rounded I-Beam handle for comfortable handling grip.
• 180° pivoting head for greater access to tight spaces.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Chrome alloy steel, chrome plated.
• Durable double stacked pawls for longer ratchet life.
• 144 ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.
• Ink-filled labels for better visibility.

• Stored on a socket rail for better tool organization
• Chrome finish for easy cleaning and corrosion protection
• Stamped sizes for easy visibility
• Wrench ready FOUR FLAT sides
• FOUR FLAT sides on socket deter rolling

General Information

Brake Caliper Rewind Tool Kit. Brake Caliper; Rewind Tool.

• Adaptor 2 - Most Ford, Mazda, Mitsubishi, Toyota - 32.5mm PCD, 6mm diameter pins
• Adaptor 1 - Most popular Japanese and European vehicles - 22mm PCD, 6mm Diameter pin
• Compete with reaction plate and adaptors number 1 and 2
• For use on disc brake calipers fitted to most European and Japanese cars with right handed thread

• Air flow rate - 12L/min
• Max wattage - 100W
• Max amperage - 8A
• 12V DC power supply - plugs directly into cagarette lighter socket 
• Handy accessory holder - air bed adaptor, ball adaptor and tyre valve adaptor
• Compact hose and power cord storage - air hose -50cm, power cord - 3m
• Max pressure range - 0-150PSI
• Quick release connector valve 
• Multiple adaptors included 
• Portable and compact
• Automatic pre-set shut off 
• Super bright LED night light
• Large precision digital display
• High speed inflation - 3.5 mins (0-36PSI/175/65/R14)

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

General Information

Oil Filter Wrench - 64.5mm x 14 Flutes x 3/8"D

• 3/8in.D
• Removes filters without damage to the filter housing
• Oil Filter wrench size: 645mm x 14 flutes
• An aluminium Oil Filter Wrench specifically designed for use on Toyota (07-08) 35L V6 and Lexus GS300 (06-) IS250(2006-) IS350(2006-) ES350(2007-) GS350(2007-) GS450H(2007-) LS460(2007-) RX350(2007-) LS600H(2008-)

• Lacquer finish for exceptional rust prevention.
• Hardened jaws and cutting edges for strength and durability.
• Professional grade pliers are constructed from chrome-moly material and feature comfort grip handles.

• Pliers Groove Joint Pliers 16in.

• Chrome alloy steel, chrome plated.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Durable double stacked pawls for longer ratchet life.
• 144 Ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.

• 15° offset box for better accessibility.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.

• Gas cartridge sold separately
• For use with G2350 or 2175A Go System threaded gas cartridges
• Safety checked and test burned
• Ideal for skilled plumbing, soldering and brazing work
• Stability base included
• Stable neck stand allows for hands free use
• Auto start Piezo ignition
• Instantly FLARESAFE; use at any angle
• A durable high power, high temperature (up to 1500 C) gas torch

• Conforms to BS:EN521

• Wrench can be used in extremely tight situations where other wrenches would fail
• 25% wider jaws providing the ability to work on larger fasteners
• 60% thicker ergonomic handle design
• laser-etched size indexing
• Features a patented low-rattle design

• Lanyard hole.
• 8? adjustable wrench (48227508) has an extra wide jaw of 38 mm for increased jaw capacity in confined environments.
• Permanent lasered inch and mm markings for accurate adjustment
• Parallel jaws won't slip or damage finish surfaces.
• Slim head design for reaching into tight spaces.
• Ergonomic rounded handle design for a comfortable fit in the hand and less pressure points on the palm.
• Chrome plating for best-in-class rust protection and increased durability.
• Precision adjustment screw with accurate threads and tight tolerances. The jaws won't back off during use.

• High quality hot-forging process provides a performance exceeding ASME standard
• Short beam excels for use in limited space applications
• Set contains 10 popular Metric sizes for all Professional technician's needs
• High visibility colour filled size mark for easy identification during use
• Premium Chrome Finish
• 15 degree offset box end

• ASME Compliant

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• Rounded I-Beam handle for comfortable handling grip.
• 180° pivoting head for greater access to tight spaces.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Chrome alloy steel, chrome plated.
• Durable double stacked pawls for longer ratchet life.
• 144 ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.
• Ink-filled labels for better visibility.

• CR-V alloy steel for long lasting durability.
• Worldwide patent.
• Meet ANSI, DIN torque spec.
• Processing without tolerance to true present the 90 teeth 4 degrees of operation function.
• Meet DIN torque spec.
• 180 degrees flex head & extra long beam offers extreme reach and loads of leverage.
• Ratcheting box ends are designed to accommodate a variety of fasteners including both 6-and 12-point nuts.
• Reversible wrenches feature an easy-to-use reversing mechanism
• Wrenches feature a sleek, offset-head design for tight access points, slim dimensions for confined areas.

• Made from Chrome Molybdenum
• Due to the nature of this product they are considered consumable and not covered by the Laser guarantee
• An impact adaptor that reduces 1in. drive (F) accessories down to 3/4in. drive (M)

• 300mm Groove Joint Pliers
• 250mm Groove Joint Pliers
• 127mm Groove Joint Pliers

• Flexible material allows for easy install and removal.
• Form-fitting lightweight design protects the tool and work surface while adding minimal size or weight to the tool.
• Use on any other product than advised may result in damage to tool motor and may void tool warranty.
• Not for use on or near live electrical circuits.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening
• Phosphate Outer Finish

• Chrome Molybdenum Alloy Steel

General Information

Compression Test Adaptor Compression Test Adaptor.

• Also used on Peugeot 207/307 and Renault 12 16 valve
• BMW, Mini, Mercedes-Benz M156 (AMG engine manufactured from 2006 onwards
• This tool is now essential on BMW E90 335i with N54 engines (2006)
• This extra long Compression Test Adaptor is designed to fit 12mm Spark Plugs

• Flexible material allows for easy install and removal.
• Form-fitting lightweight design protects the tool and work surface while adding minimal size or weight to the tool.
• Use on any other product than advised may result in damage to tool motor and may void tool warranty.
• Not for use on or near live electrical circuits.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening
• Phosphate Outer Finish

• Chrome Molybdenum Alloy Steel