Workshop Tools
Categories
Important compatibility info
Additional Information
- Brake bleed tube made of soft rubber, connect to a bleed valve and has a split the other end allowing fluid to be expelled into a container
- The split is normally held below the fluid level in a container to stop air ingress
- Brake fluid resistant
Important compatibility info
Title | Spanner - Open Ended - 17mm |
Additional Information
- Single sized
- Manufactured from Chrome Vanadium
- Part of a range 6mm-46mm
- Black phosphate finish
Important compatibility info
Title | Extension Socket - 1/4in. Dr - 2in. Long |
Additional Information
- Mirror polished Chrome plated finish
- Chrome Vanadium
- 1/4in. Drive
- 2in. Long
- .049 lbs
Important compatibility info
Title | Standard Male Adaptor -Thread R 1/4 |
Additional Information
- Used in most workshop/garage environments
- Wide choice of thread and hose tail sizes
- Used with Airflow, Vertex, Twin, non-corrodible and Safeflow Safety couplings
- Case hardened for longer life
- Nominal Bore 4.8 mm
- Thread Type Male
- Thread Size R 1/4
Important compatibility info
Title | Impact Phillips Bit - #1 - 3in. Long |
Additional Information
- Designed for impact use
- Phillips Drive
Important compatibility info
Title | Impact Phillips Bit - #2 - 3in. Long |
Additional Information
- Designed for impact use
- Phillips Drive
Important compatibility info
Title | Impact Phillips Bit - #3 - 3in. Long |
Additional Information
- Designed for impact use
- Phillips Drive
Important compatibility info
Title | Socket - Shallow Impact - Metric - 1/2in. Dr - 10 mm |
Additional Information
- Black Phosphate
- Radius corner design for better gripping of fastener & chamfered openings for faster socket fit over fastener
- 6 Points Socket
- Impact
- Shallow Socket
Important compatibility info
Title | Socket - Shallow Impact - Metric - 1/2in. Dr - 11 mm |
Additional Information
- Black Phosphate
- Radius corner design for better gripping of fastener & chamfered openings for faster socket fit over fastener
- 6 Points Socket
- Impact
- Shallow Socket
Important compatibility info
Title | Socket - Shallow Impact - Metric - 1/2in. Dr - 12 mm |
Additional Information
- Black Phosphate
- Radius corner design for better gripping of fastener & chamfered openings for faster socket fit over fastener
- 6 Points Socket
- Impact
- Shallow Socket
Important compatibility info
Title | Socket - Shallow Impact - Metric - 1/2in. Dr - 13 mm |
Additional Information
- Black Phosphate
- Radius corner design for better gripping of fastener & chamfered openings for faster socket fit over fastener
- 6 Points Socket
- Impact
- Shallow Socket
Important compatibility info
Title | Combination Spanner - Metric Spanner - 7 mm |
Additional Information
- Mirror polished Chrome plated finish
- 12 Point
- Radius cornered offset chamfered box end provides precise fastener control
- 15 degree angled open end for greater access
Important compatibility info
Title | Tampe Star Bit - T55H - 3/8in. Drive Socket |
Additional Information
- S2 BIT material for strength and durability
- mirror polish chrome plated CR-V socket resist rust
Important compatibility info
Title | Star Plus Bit - TP55 - 3/8in. Drive Socket |
Additional Information
- S2 BIT material for strength and durability
- mirror polish chrome plated CR-V socket resist rust
Important compatibility info
Title | 1/4 Drive Socket Metric Standard-4MM |
Additional Information
- FOUR FLAT™ sides on socket deter rolling.
- Wrench ready FOUR FLAT™ sides.
- Stamped sizes for easy visibility.
- Chrome finish.
Important compatibility info
Title | 1/4 Drive Socket Metric Standard-4.5MM |
Additional Information
- FOUR FLAT™ sides on socket deter rolling.
- Wrench ready FOUR FLAT™ sides.
- Stamped sizes for easy visibility.
- Chrome finish.
Important compatibility info
Title | 1/4 Drive Socket Metric Standard-7MM |
Additional Information
- FOUR FLAT™ sides on socket deter rolling.
- Wrench ready FOUR FLAT™ sides.
- Stamped sizes for easy visibility.
- Chrome finish.
Important compatibility info
Title | 1/4 Drive Socket Metric Standard-9MM |
Additional Information
- FOUR FLAT™ sides on socket deter rolling.
- Wrench ready FOUR FLAT™ sides.
- Stamped sizes for easy visibility.
- Chrome finish.
Important compatibility info
Title | Socket Reducer - 3/8in. Male to 1/4in. Female |
Additional Information
- Mirror polished Chrome plated finish
- Plating helps with rust resistance
- Allows adapting drive sizes
- Locking function
- This socket reducer is 3/8in. Male to 1/4in. Female
Important compatibility info
Title | 1/4 Drive Socket Metric Deep-4.5MM |
Additional Information
- FOUR FLAT™ sides on socket deter rolling.
- Wrench ready FOUR FLAT™ sides.
- Stamped sizes for easy visibility.
- Chrome finish.
Important compatibility info
Title | Combination Spanner - Metric Spanner - 8 mm |
Additional Information
- Mirror polished Chrome plated finish
- 12 Point
- Radius cornered offset chamfered box end provides precise fastener control
- 15 degree angled open end for greater access
Important compatibility info
Title | Car Dust Caps With Key - Chrome Metal - Pack Of 4 |
Additional Information
- These caps are used to stop dirt entering the schrader valve on tyres
- Standard thread
- Easy grip
Important compatibility info
Title | Socket - Shallow - Metric Standard - 1/4in. Dr - 5.5 mm |
Additional Information
- Deep rolled stamped vertical knurling make the right tool easy to identify
- Full polish chrome finish provides rust resistance
- Standard non-impact socket
- Meets or exceeds all ANSI/ASME standards
- Deep rolled stamped markings provide easy identification
Important compatibility info
Title | 1/4 Drive Socket Metric Standard-5MM |
Additional Information
- FOUR FLAT™ sides on socket deter rolling.
- Wrench ready FOUR FLAT™ sides.
- Stamped sizes for easy visibility.
- Chrome finish.
Important compatibility info
Title | 1/4 Drive Socket Metric Standard-6MM |
Additional Information
- FOUR FLAT™ sides on socket deter rolling.
- Wrench ready FOUR FLAT™ sides.
- Stamped sizes for easy visibility.
- Chrome finish.
Important compatibility info
Title | 1/4 Drive Socket Metric Standard-11MM |
Additional Information
- FOUR FLAT™ sides on socket deter rolling.
- Wrench ready FOUR FLAT™ sides.
- Stamped sizes for easy visibility.
- Chrome finish.
Important compatibility info
Title | 1/4 Drive Socket Metric Standard-12MM |
Additional Information
- FOUR FLAT™ sides on socket deter rolling.
- Wrench ready FOUR FLAT™ sides.
- Stamped sizes for easy visibility.
- Chrome finish.
Important compatibility info
Title | 1/4 Drive Socket Metric Standard-13MM |
Additional Information
- FOUR FLAT™ sides on socket deter rolling.
- Wrench ready FOUR FLAT™ sides.
- Stamped sizes for easy visibility.
- Chrome finish.
Important compatibility info
Title | Grind.W Pro+ SG27 115x6mm-1pc |
Additional Information
- Characteristics: Provides good lifetime and efficient grinding characteristics.
- Applications: Sound performance in mild steel and non alloy tool steel.
Important compatibility info
Title | INKZALL MARKER BLUE 1PC |
Additional Information
- Helmet clip – can be clipped to the construction site cap trousers overalls.
- Stays sharp doesn't mushroom or push back under pressure.
- Marker continues to write after 72+ hours of cap off time.
- Thin body for use in restricted areas.
- Easy open cap for one hand operation.
- Acrylic nib ideal for rough surfaces such as OSB and concrete.
- For use on concrete wood metal plywood OSB plastic.
- Can be used on wet oily dusty rusty with debris surfaces.
- Quick dry time – reduced smearing markings on PVC metal surfaces.
- Lanyard hole e.g. to attach the INKZALL highlighters to the belt.