Proud to be a UK-based company
Contact usCar Parts & Accessories by Blue Print
Blue Print is a brand of high quality parts for use in the servicing and repair of cars and vans.
Blue Print parts are a great value alternative to expensive replacement parts from the vehicle manufacturer’s dealership. They are designed and specified to be an exact replacement for the original part that is removed from the car and to perform to high standards when fitted. Categories
Important compatibility info
| Weight | 7.688 kg |
| Additional Information | with central slave cylinder, with synthetic grease |
| Outer diameter | 241 mm |
| Number of Teeth | 26 |
| Multi-piece | Three-piece |
| Function | Clutch Kit |
| Extra Description | SMARTFIT Solution Kit |
| Type | Clutch Kit |
| Clutch | Replacement for self-adjusting clutch pressure plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Central Slave Cylinder, clutch (ADU173601)
£151.92
Important compatibility info
| Weight | 7.688 kg |
| Additional Information | with central slave cylinder, with synthetic grease |
| Outer diameter | 241 mm |
| Number of Teeth | 26 |
| Multi-piece | Three-piece |
| Function | Clutch Kit |
| Extra Description | SMARTFIT Solution Kit |
| Type | Clutch Kit |
| Clutch | Replacement for self-adjusting clutch pressure plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Central Slave Cylinder, clutch (ADU173601)
£151.92
Important compatibility info
| Weight | 5.983 kg |
| Additional Information | with synthetic grease |
| Outer diameter | 228 mm |
| Number of Teeth | 21 |
| Multi-piece | Two-piece |
| Function | Clutch Kit |
| Extra Description | SMARTFIT Conversion Service Kit |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.91
Important compatibility info
| Weight | 5.983 kg |
| Additional Information | with synthetic grease |
| Outer diameter | 228 mm |
| Number of Teeth | 21 |
| Multi-piece | Two-piece |
| Function | Clutch Kit |
| Extra Description | SMARTFIT Conversion Service Kit |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.91
Important compatibility info
| Weight | 10.65 kg |
| Function | Rear Muffler |
| Type | Rear Muffler |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.78
Important compatibility info
| Weight | 10.65 kg |
| Function | Rear Muffler |
| Type | Rear Muffler |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.78
Important compatibility info
| Weight | 4.650 kg |
| Function | Clutch Kit |
| Number of Teeth | 26 |
| Multi-piece | Three-piece |
| Additional Information | with central slave cylinder, with synthetic grease |
| Outer diameter | 180 mm |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Disc (ADN13172)
- 1x Blue Print Central Slave Cylinder, clutch (ADN13653)
£151.51
Important compatibility info
| Weight | 4.650 kg |
| Function | Clutch Kit |
| Number of Teeth | 26 |
| Multi-piece | Three-piece |
| Additional Information | with central slave cylinder, with synthetic grease |
| Outer diameter | 180 mm |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Disc (ADN13172)
- 1x Blue Print Central Slave Cylinder, clutch (ADN13653)
£151.51
Important compatibility info
| Multi-piece | Three-piece |
| Additional Information 2 | with clutch release bearing |
| Additional Information | with synthetic grease |
| Function | Clutch Kit |
| Number of Teeth | 23 |
| Outer diameter | 253 mm |
| Weight | 7.838 kg |
| Extra Description | SMARTFIT Conversion Service Kit |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.30
Important compatibility info
| Multi-piece | Three-piece |
| Additional Information 2 | with clutch release bearing |
| Additional Information | with synthetic grease |
| Function | Clutch Kit |
| Number of Teeth | 23 |
| Outer diameter | 253 mm |
| Weight | 7.838 kg |
| Extra Description | SMARTFIT Conversion Service Kit |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.30
Important compatibility info
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Outer diameter 2 | 135 mm |
| Outer diameter 1 | 55 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 54 mm |
| Outer diameter | 67 mm |
| Bearing Type | Angular Ball Bearing |
| Weight | 2.38 kg |
| Bolt Hole Circle Diameter | 100 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.21
Important compatibility info
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Outer diameter 2 | 135 mm |
| Outer diameter 1 | 55 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 54 mm |
| Outer diameter | 67 mm |
| Bearing Type | Angular Ball Bearing |
| Weight | 2.38 kg |
| Bolt Hole Circle Diameter | 100 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.21
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | ADM58665C |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right |
| Weight | 3.630 kg |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.21
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | ADM58665C |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right |
| Weight | 3.630 kg |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.21
Important compatibility info
| Weight | 0.001 kg |
| Function | Clutch, radiator fan |
| for OE number | ME200095 |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.17
Important compatibility info
| Weight | 0.001 kg |
| Function | Clutch, radiator fan |
| for OE number | ME200095 |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.17
Important compatibility info
| Weight | 1.45 kg |
| Width | 20 mm. 22 mm |
| Placement on Vehicle | Rear Axle |
| Function | Wheel Bearing Kit |
| Bearing Type | Tapered Roller Bearing |
| Inner diameter | 45 mm. 50 mm |
| Outer diameter | 78 mm. 90 mm |
| Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.17
Important compatibility info
| Weight | 1.45 kg |
| Width | 20 mm. 22 mm |
| Placement on Vehicle | Rear Axle |
| Function | Wheel Bearing Kit |
| Bearing Type | Tapered Roller Bearing |
| Inner diameter | 45 mm. 50 mm |
| Outer diameter | 78 mm. 90 mm |
| Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.17
Important compatibility info
| Weight | 0.1 kg |
| Additional Information | with gasket/seal |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Type | Mass Air Flow Sensor |
| for OE number | 22204-33010 |
| Number of Connectors / Ports | 5 |
| Housing Type | without housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.17
Important compatibility info
| Weight | 0.1 kg |
| Additional Information | with gasket/seal |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Type | Mass Air Flow Sensor |
| for OE number | 22204-33010 |
| Number of Connectors / Ports | 5 |
| Housing Type | without housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.17
Important compatibility info
| Weight | 8.440 kg |
| Outer diameter | 236 mm |
| Number of Teeth | 21 |
| Additional Information | with synthetic grease |
| Multi-piece | Three-piece |
| Function | Clutch Kit |
| Additional Information 2 | with clutch release bearing |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Disc (ADT33168)
- 1x Blue Print Clutch Pressure Plate (ADT33249N)
- 1x Blue Print Clutch Release Bearing (ADT33335)
£151.05
Important compatibility info
| Weight | 8.440 kg |
| Outer diameter | 236 mm |
| Number of Teeth | 21 |
| Additional Information | with synthetic grease |
| Multi-piece | Three-piece |
| Function | Clutch Kit |
| Additional Information 2 | with clutch release bearing |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Disc (ADT33168)
- 1x Blue Print Clutch Pressure Plate (ADT33249N)
- 1x Blue Print Clutch Release Bearing (ADT33335)
£151.05
Important compatibility info
| Weight | 7.500 kg |
| Multi-piece | Three-piece |
| Number of Teeth | 21 |
| Outer diameter | 243 mm |
| Additional Information | with central slave cylinder, with synthetic grease |
| Function | Clutch Kit |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Disc (ADN13184)
- 1x Blue Print Clutch Pressure Plate (ADN13291N)
- 1x Blue Print Central Slave Cylinder, clutch (ADN13661)
£151.02
Important compatibility info
| Weight | 7.500 kg |
| Multi-piece | Three-piece |
| Number of Teeth | 21 |
| Outer diameter | 243 mm |
| Additional Information | with central slave cylinder, with synthetic grease |
| Function | Clutch Kit |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Disc (ADN13184)
- 1x Blue Print Clutch Pressure Plate (ADN13291N)
- 1x Blue Print Central Slave Cylinder, clutch (ADN13661)
£151.02
Important compatibility info
| Weight | 4.792 kg |
| Clutch | Replacement for self-adjusting clutch pressure plate |
| Additional Information | with central slave cylinder, with synthetic grease |
| Outer diameter | 221 mm |
| Number of Teeth | 17 |
| Multi-piece | Three-piece |
| Function | Clutch Kit |
| Extra Description | SMARTFIT Solution Kit |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Central Slave Cylinder, clutch (ADF123609)
£150.71
Important compatibility info
| Weight | 4.792 kg |
| Clutch | Replacement for self-adjusting clutch pressure plate |
| Additional Information | with central slave cylinder, with synthetic grease |
| Outer diameter | 221 mm |
| Number of Teeth | 17 |
| Multi-piece | Three-piece |
| Function | Clutch Kit |
| Extra Description | SMARTFIT Solution Kit |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Central Slave Cylinder, clutch (ADF123609)
£150.71
Important compatibility info
| Weight | 8.750 kg |
| Outer diameter | 240 mm |
| Number of Teeth | 23 |
| Multi-piece | Three-piece |
| Additional Information 2 | with clutch release bearing |
| Function | Clutch Kit |
| Additional Information | with synthetic grease |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Pressure Plate (ADC43251N)
- 1x Blue Print Clutch Disc (ADC43155)
- 1x Blue Print Clutch Release Bearing (ADS73306)
£150.62
Important compatibility info
| Weight | 8.750 kg |
| Outer diameter | 240 mm |
| Number of Teeth | 23 |
| Multi-piece | Three-piece |
| Additional Information 2 | with clutch release bearing |
| Function | Clutch Kit |
| Additional Information | with synthetic grease |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Pressure Plate (ADC43251N)
- 1x Blue Print Clutch Disc (ADC43155)
- 1x Blue Print Clutch Release Bearing (ADS73306)
£150.62
Important compatibility info
| Weight | 7.760 kg |
| Additional Information | with synthetic grease |
| Multi-piece | Three-piece |
| Additional Information 2 | with clutch release bearing |
| Number of Teeth | 21 |
| Outer diameter | 238 mm |
| Function | Clutch Kit |
| Extra Description | SMARTFIT Conversion Service Kit |
| Type | Clutch Kit |
| Replaces | ADT330193; ADT330209 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Pressure Plate (ADT33287N)
- 1x Blue Print Clutch Disc (ADT33168)
- 1x Blue Print Clutch Release Bearing (ADT33340)
£150.57
Important compatibility info
| Weight | 7.760 kg |
| Additional Information | with synthetic grease |
| Multi-piece | Three-piece |
| Additional Information 2 | with clutch release bearing |
| Number of Teeth | 21 |
| Outer diameter | 238 mm |
| Function | Clutch Kit |
| Extra Description | SMARTFIT Conversion Service Kit |
| Type | Clutch Kit |
| Replaces | ADT330193; ADT330209 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Pressure Plate (ADT33287N)
- 1x Blue Print Clutch Disc (ADT33168)
- 1x Blue Print Clutch Release Bearing (ADT33340)
£150.57
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023