Car Parts & Accessories by Castrol

Technical Information

Motorcycle Ancillaries Mtcycl Anc -- Fork Oils

• minimised stiction for smooth damping operation and protection against corrosion of all the internal parts
• wear protection of suspension components
• fast air release for anti-fade performance
• good damping performance over high and low temperatures
• Castrol Fork Oils are blended with the latest technology performance additives and highly refined base oils
• Castrol Fork Oil 15W is an advanced mineral based suspension fluid designed to provide the optimum damping performance in all on and off road suspensions

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE Professional is micro-filtered and certified CO2 Neutral according to the highest global standard*. Its patented Fluid TITANIUM transforms to be stronger under pressure and reduces friction for maximum engine performance when you need it most.

Castrol EDGE Professional with Fluid TITANIUM: unlock the true performance of your engine.

* in accordance with the BSI PAS 2060 specification

Application

Castrol EDGE Professional LL IV FE 0W-20 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA C5 0W-20 lubricant.

Castrol EDGE Professional LL IV FE 0W-20 is approved for use in vehicles that require a VW 508 00 / 509 00 specification 0W-20 lubricant.

Castrol EDGE Professional LL IV FE 0W-20 is approved for use in Porsche vehicles that require a Porsche C20 specification 0W-20 lubricant.

Advantages

Castrol EDGE Professional LL IV FE 0W-20 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's sophisticated vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low temperature performance

Product Performance Claims

• ACEA C5
• Porsche C20
• VW 508 00/ 509 00

• Castrol EDGE Professional LL IV FE 0W-20 is suitable for petrol, diesel and hybrid cars and designed to meet the latest specifications required by modern engines where the vehicle manufacturer recommends an ACEA C5, C6 0W-20 lubricant.
• Engines are complex, with many moving parts – movement that can waste useful fuel energy through inefficiency. With these losses, power can be impacted. The challenge is to maintain the high performance levels expected by drivers, whilst engine technology adapts to meet the demanding legislative limits.
• With worldwide emissions regulations tightening there is a renewed challenge to produce more power whilst still improving engine efficiency. Never before has engine oil played such a key role to deliver performance.
• Delivers more horsepower and greater acceleration to get you more meters ahead
• Demonstrates improved performance as a result of better fuel economy
• Stronger under pressure in today’s modern engines
• Recommended for world-leading car manufacturers
• Suitable for use in hybrid cars

• Product Performance Claims: ACEA C5, C6
• BMW Longlife-17FE+
• MB-Approval 229.71/ 229.72
• Porsche C20
• VW 508 00/ 509 00
• Meets Ford WSS-M2C956-A1

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE Professional is micro-filtered and certified CO2 Neutral according to the highest global standard*. Its patented Fluid TITANIUM transforms to be stronger under pressure and reduces friction for maximum engine performance when you need it most.

Castrol EDGE Professional with Fluid TITANIUM: unlock the true performance of your engine.

* in accordance with the BSI PAS 2060 specification

Application

Castrol EDGE Professional LL IV FE 0W-20 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA C5 0W-20 lubricant.

Castrol EDGE Professional LL IV FE 0W-20 is approved for use in vehicles that require a VW 508 00 / 509 00 specification 0W-20 lubricant.

Castrol EDGE Professional LL IV FE 0W-20 is approved for use in Porsche vehicles that require a Porsche C20 specification 0W-20 lubricant.

Advantages

Castrol EDGE Professional LL IV FE 0W-20 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's sophisticated vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low temperature performance

Product Performance Claims

• ACEA C5
• Porsche C20
• VW 508 00/ 509 00

• Castrol EDGE Professional LL IV FE 0W-20 is suitable for petrol, diesel and hybrid cars and designed to meet the latest specifications required by modern engines where the vehicle manufacturer recommends an ACEA C5, C6 0W-20 lubricant.
• Engines are complex, with many moving parts – movement that can waste useful fuel energy through inefficiency. With these losses, power can be impacted. The challenge is to maintain the high performance levels expected by drivers, whilst engine technology adapts to meet the demanding legislative limits.
• With worldwide emissions regulations tightening there is a renewed challenge to produce more power whilst still improving engine efficiency. Never before has engine oil played such a key role to deliver performance.
• Delivers more horsepower and greater acceleration to get you more meters ahead
• Demonstrates improved performance as a result of better fuel economy
• Stronger under pressure in today’s modern engines
• Recommended for world-leading car manufacturers
• Suitable for use in hybrid cars

• Product Performance Claims: ACEA C5, C6
• BMW Longlife-17FE+
• MB-Approval 229.71/ 229.72
• Porsche C20
• VW 508 00/ 509 00
• Meets Ford WSS-M2C956-A1

Technical Information

Engine oils: Motorcycle Motorcycle 4T eng oil -- Synthetic

Technical Information

Engine oils: Motorcycle Motorcycle 4T eng oil -- Synthetic

Technical Information

Engine oils: Motorcycle Motorcycle 4T eng oil -- Synthetic

• Full synthetic 4-stroke motorcycle engine oil featuring Race Derived Technology
• Castrol POWER1 Racing 4T stays strong in racetrack conditions
• Castrol POWER1 Racing 4T gives ultimate acceleration in racetrack conditions
• Complies with requirements of catalyst equipped engines
• It has been tested and proven to deliverexceptional acceleration and power at the touch of the throttle.

• API SN
• JASO MA2

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most. Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Castrol EDGE 0W-20 C5 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends: ACEA C5, ACEA C6, API SP, ILSAC GF-6 or earlier specification 0W-20 lubricant.

Castrol EDGE 0W-20 C5 is approved for use in vehicles from leading manufacturers, please refer to the specifications section and your owners handbook.

GM dexos1(TM) Approved-GEN 3 : D355BKDD082

Castrol EDGE 0W-20 C5 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low-temperature performance

Specification

• ACEA C5, C6
• API SP
• ILSAC GF-6
• GM dexos1(TM) Gen 3
• Jaguar Land Rover engine oil specification STJLR.03.5006
• MB-Approval 229.71
• Opel OV0401547
• Meets Chrysler MS 6395
• Meets Fiat 9.55535-CR1
• Meets Fiat 9.55535-GSX
• Meets Ford WSS-M2C947-A
• Meets Ford WSS-M2C947-B1

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most. Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Castrol EDGE 0W-20 C5 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends: ACEA C5, ACEA C6, API SP, ILSAC GF-6 or earlier specification 0W-20 lubricant.

Castrol EDGE 0W-20 C5 is approved for use in vehicles from leading manufacturers, please refer to the specifications section and your owners handbook.

GM dexos1(TM) Approved-GEN 3 : D355BKDD082

Castrol EDGE 0W-20 C5 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low-temperature performance

Specification

• ACEA C5, C6
• API SP
• ILSAC GF-6
• GM dexos1(TM) Gen 3
• Jaguar Land Rover engine oil specification STJLR.03.5006
• MB-Approval 229.71
• Opel OV0401547
• Meets Chrysler MS 6395
• Meets Fiat 9.55535-CR1
• Meets Fiat 9.55535-GSX
• Meets Ford WSS-M2C947-A
• Meets Ford WSS-M2C947-B1

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Technical Information

Engine oils: Motorcycle Motorcycle 4T eng oil -- Part Synthetic

• Its Power Sustain Formula is specially designed to protect the engine from the build up of power robbing deposits. I
• Exceptional cleanliness performance delivers power protection throughout the complete oil drain interval
• Allows the engine to develop the same power as when new, even after an extended duration of speed, high load, high temperature running.
• This product is available specifically for use in BMW motorcycles.

• API SN
• JASO MA2

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most.

Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Application

Castrol EDGE 5W-40 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends: ACEA C3, API SN/CF Lubricant

Castrol EDGE 5W-40 is approved for use in vehicles from leading manufacturers please refer to the product performance section and your owners handbook.

*GM dexos2TM: supersedes GM-LL-B-025 and GM-LL-A-025 : GB2D0114082

Advantages

Castrol EDGE 5W-40 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure

Product Performance Claims

• ACEA C3
• API SN/CF
• Meets Fiat 9.55535-S2
• Meets Ford WSS-M2C917-A
• GM dexos2(TM) *
• MB-Approval 226.5/ 229.31/ 229.51
• Renault RN 0700 / RN 0710
• VW 505 00/ 505 01

• Castrol EDGE 5W-40 is suitable for petrol and diesel cars and designed to meet the latest specifications required by modern engines where the vehicle manufacturer recommends an ACEA C3, API SN/CF or earlier specification 5W-40 lubricant.
• Engines are complex, with many moving parts – movement that can waste useful fuel energy through inefficiency. With these losses, power can be impacted. The challenge is to maintain the high performance levels expected by drivers, whilst engine technology adapts to meet the demanding legislative limits.
• With worldwide emissions regulations tightening there is a renewed challenge to produce more power whilst still improving engine efficiency. Never before has engine oil played such a key role to deliver performance.
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Demonstrates improved performance as a result of better fuel economy
• Delivers more horsepower and greater acceleration
• Stronger under pressure in today’s modern engines

• Performance: ACEA C3 API SN/CF
• MB-Approval 226.5/ 229.31/ 229.51
• OPEL OV 040 1547 - D40
• Renault RN0700 / RN0710
• VW 505 00/ 505 01
• Meets Fiat 9.55535-S2
• Meets Ford WSS-M2C917-A

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most.

Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Application

Castrol EDGE 5W-40 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends: ACEA C3, API SN/CF Lubricant

Castrol EDGE 5W-40 is approved for use in vehicles from leading manufacturers please refer to the product performance section and your owners handbook.

*GM dexos2TM: supersedes GM-LL-B-025 and GM-LL-A-025 : GB2D0114082

Advantages

Castrol EDGE 5W-40 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure

Product Performance Claims

• ACEA C3
• API SN/CF
• Meets Fiat 9.55535-S2
• Meets Ford WSS-M2C917-A
• GM dexos2(TM) *
• MB-Approval 226.5/ 229.31/ 229.51
• Renault RN 0700 / RN 0710
• VW 505 00/ 505 01

• Castrol EDGE 5W-40 is suitable for petrol and diesel cars and designed to meet the latest specifications required by modern engines where the vehicle manufacturer recommends an ACEA C3, API SN/CF or earlier specification 5W-40 lubricant.
• Engines are complex, with many moving parts – movement that can waste useful fuel energy through inefficiency. With these losses, power can be impacted. The challenge is to maintain the high performance levels expected by drivers, whilst engine technology adapts to meet the demanding legislative limits.
• With worldwide emissions regulations tightening there is a renewed challenge to produce more power whilst still improving engine efficiency. Never before has engine oil played such a key role to deliver performance.
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Demonstrates improved performance as a result of better fuel economy
• Delivers more horsepower and greater acceleration
• Stronger under pressure in today’s modern engines

• Performance: ACEA C3 API SN/CF
• MB-Approval 226.5/ 229.31/ 229.51
• OPEL OV 040 1547 - D40
• Renault RN0700 / RN0710
• VW 505 00/ 505 01
• Meets Fiat 9.55535-S2
• Meets Ford WSS-M2C917-A

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most. Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine. Application Castrol EDGE 5W-30 LL is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends: ACEA C3 Castrol EDGE 5W-30 LL is approved by leading manufacturers. Please refer to your owners handbook.

Castrol EDGE 5W-30 LL with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure

Specification

• ACEA C3
• BMW Longlife-04
• MB-Approval 229.31/ 229.51
• Porsche C30
• VW 504 00/ 507 00

• Castrol EDGE 5W-30 LL is suitable for petrol, diesel and hybrid cars and designed to meet the latest specifications required by modern engines where the vehicle manufacturer recommends an ACEA C3 5W-30 lubricant
• Engines are complex, with many moving parts – movement that can waste useful fuel energy through inefficiency. With these losses, power can be impacted. The challenge is to maintain the high performance levels expected by drivers, whilst engine technology adapts to meet the demanding legislative limits.
• With worldwide emissions regulations tightening there is a renewed challenge to produce more power whilst still improving engine efficiency. Never before has engine oil played such a key role to deliver performance.
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Demonstrates improved performance as a result of better fuel economy
• Delivers more horsepower and greater acceleration
• Stronger under pressure in today’s modern engines

• Product Performance Claims: ACEA C3
• BMW Longlife-04
• MB-Approval 229.31/ 229.51
• Porsche C30
• VW 504 00/ 507 00
• Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: VW 505 00/ 505 01

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most. Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine. Application Castrol EDGE 5W-30 LL is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends: ACEA C3 Castrol EDGE 5W-30 LL is approved by leading manufacturers. Please refer to your owners handbook.

Castrol EDGE 5W-30 LL with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure

Specification

• ACEA C3
• BMW Longlife-04
• MB-Approval 229.31/ 229.51
• Porsche C30
• VW 504 00/ 507 00

• Castrol EDGE 5W-30 LL is suitable for petrol, diesel and hybrid cars and designed to meet the latest specifications required by modern engines where the vehicle manufacturer recommends an ACEA C3 5W-30 lubricant
• Engines are complex, with many moving parts – movement that can waste useful fuel energy through inefficiency. With these losses, power can be impacted. The challenge is to maintain the high performance levels expected by drivers, whilst engine technology adapts to meet the demanding legislative limits.
• With worldwide emissions regulations tightening there is a renewed challenge to produce more power whilst still improving engine efficiency. Never before has engine oil played such a key role to deliver performance.
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Demonstrates improved performance as a result of better fuel economy
• Delivers more horsepower and greater acceleration
• Stronger under pressure in today’s modern engines

• Product Performance Claims: ACEA C3
• BMW Longlife-04
• MB-Approval 229.31/ 229.51
• Porsche C30
• VW 504 00/ 507 00
• Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: VW 505 00/ 505 01

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

• Castrol Magnatec 5W-20 E is a fully synthetic lubricant suitable for use vehicles that require a 5W-20 lubricant that Meets Ford WSS-M2C948-B specification.
• Traffic congestion has increased dramatically. Today even a normal driver can stop and start up to 18,000 times a year. That’s annoying, but worse, it slowly damages your engine – permanently.
• Form a powerful force field of protection
• Dramatically reduce both warm-up and stop-start wear by 50%
• Deliver unique protection designed specifically for modern driving

• Product Performance Claims Approved - Ford WSS-M2C948-B

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

• Castrol Magnatec 5W-20 E is a fully synthetic lubricant suitable for use vehicles that require a 5W-20 lubricant that Meets Ford WSS-M2C948-B specification.
• Traffic congestion has increased dramatically. Today even a normal driver can stop and start up to 18,000 times a year. That’s annoying, but worse, it slowly damages your engine – permanently.
• Form a powerful force field of protection
• Dramatically reduce both warm-up and stop-start wear by 50%
• Deliver unique protection designed specifically for modern driving

• Product Performance Claims Approved - Ford WSS-M2C948-B

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

• Delivers low foam performance
• Recommended by world-leading car manufacturers
• Independently tested at the highest standards for proven performance
• Reduces power-robbing friction across engine speeds and conditions
• Transforms to be strongest when the pressure is highest, protecting your engine
• Suitable for use in everyday high-performance vehicles, Castrol EDGE SUPERCAR is proof that our oils are tested to the limits.

• ACEA A3/B3, A3/B4, API SN/CF
• Approved for BMW M-Models, VW 501 01/ 505 00

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

• Delivers low foam performance
• Recommended by world-leading car manufacturers
• Independently tested at the highest standards for proven performance
• Reduces power-robbing friction across engine speeds and conditions
• Transforms to be strongest when the pressure is highest, protecting your engine
• Suitable for use in everyday high-performance vehicles, Castrol EDGE SUPERCAR is proof that our oils are tested to the limits.

• ACEA A3/B3, A3/B4, API SN/CF
• Approved for BMW M-Models, VW 501 01/ 505 00

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Advances in engine technology have led to increased power and efficiency, meaning engines work harder and under higher pressures than ever before. This means the oil has to be stronger to reduce friction and protect the engine.

Castrol EDGE 5W-30 M is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C3, API SN PLUS 5W-30 lubricant. Castrol EDGE 5W-30 M is approved for use in vehicles from leading manufacturers, please refer to the specifications section and your owners handbook.

Castrol EDGE 5W-30 M is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Independently tested at the highest standards
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Proven performance across a variety of driving conditions and temperatures

Specifications

• ACEA C3
• API SN PLUS
• BMW Longlife-04
• MB-Approval 229.31/ 229.51/ 229.52

• Castrol EDGE 5W-30 M is suitable for petrol, diesel and hybrid cars and designed to meet the latest specifications required by modern engines where the vehicle manufacturer recommends an ACEA C3, API SP or earlier specification 5W-30 lubricant.
• Engines are complex, with many moving parts – movement that can waste useful fuel energy through inefficiency. With these losses, power can be impacted. The challenge is to maintain the high performance levels expected by drivers, whilst engine technology adapts to meet the demanding legislative limits.
• With worldwide emissions regulations tightening there is a renewed challenge to produce more power whilst still improving engine efficiency. Never before has engine oil played such a key role to deliver performance.
• Delivers more horsepower and greater acceleration to get you more metres ahead
• Demonstrates improved performance as a result of better fuel economy
• Stronger under pressure in today’s modern engines
• Recommended for world-leading car manufacturers
• Suitable for use in hybrid cars

• Product Performance Claims: ACEA C3 API SP
• BMW Longlife-04
• MB-Approval 229.51/ 229.52
• Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: MB 229.31

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Advances in engine technology have led to increased power and efficiency, meaning engines work harder and under higher pressures than ever before. This means the oil has to be stronger to reduce friction and protect the engine.

Castrol EDGE 5W-30 M is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C3, API SN PLUS 5W-30 lubricant. Castrol EDGE 5W-30 M is approved for use in vehicles from leading manufacturers, please refer to the specifications section and your owners handbook.

Castrol EDGE 5W-30 M is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Independently tested at the highest standards
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Proven performance across a variety of driving conditions and temperatures

Specifications

• ACEA C3
• API SN PLUS
• BMW Longlife-04
• MB-Approval 229.31/ 229.51/ 229.52

• Castrol EDGE 5W-30 M is suitable for petrol, diesel and hybrid cars and designed to meet the latest specifications required by modern engines where the vehicle manufacturer recommends an ACEA C3, API SP or earlier specification 5W-30 lubricant.
• Engines are complex, with many moving parts – movement that can waste useful fuel energy through inefficiency. With these losses, power can be impacted. The challenge is to maintain the high performance levels expected by drivers, whilst engine technology adapts to meet the demanding legislative limits.
• With worldwide emissions regulations tightening there is a renewed challenge to produce more power whilst still improving engine efficiency. Never before has engine oil played such a key role to deliver performance.
• Delivers more horsepower and greater acceleration to get you more metres ahead
• Demonstrates improved performance as a result of better fuel economy
• Stronger under pressure in today’s modern engines
• Recommended for world-leading car manufacturers
• Suitable for use in hybrid cars

• Product Performance Claims: ACEA C3 API SP
• BMW Longlife-04
• MB-Approval 229.51/ 229.52
• Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: MB 229.31

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most.

Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Application

Castrol EDGE 0W-20 V is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C5 0W-20 lubricant

Castrol EDGE 0W-20 is approved for use in Volvo vehicles that require a Volvo VCC RBS0-2AE specification 0W-20 lubricant. Please refer to your owners handbook

Advantages

Castrol EDGE 0W-20 V with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low temperature performance

Product Performance Claims

• ACEA C5
• Volvo VCC RBS0-2AE

• Castrol EDGE 0W-20 V is suitable for petrol, diesel and hybrid cars and designed to meet the latest specifications required by modern engines where the vehicle manufacturer recommends an ACEA C5 0W-20 lubricant
• Engines are complex, with many moving parts – movement that can waste useful fuel energy through inefficiency. With these losses, power can be impacted. The challenge is to maintain the high performance levels expected by drivers, whilst engine technology adapts to meet the demanding legislative limits.
• With worldwide emissions regulations tightening there is a renewed challenge to produce more power whilst still improving engine efficiency. Never before has engine oil played such a key role to deliver performance.
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Demonstrates improved performance as a result of better fuel economy
• Delivers more horsepower and greater acceleration
• Stronger under pressure in today’s modern engines

• Product Performance Claims: ACEA C5, Volvo VCC RBS0-2AE

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most.

Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Application

Castrol EDGE 0W-20 V is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C5 0W-20 lubricant

Castrol EDGE 0W-20 is approved for use in Volvo vehicles that require a Volvo VCC RBS0-2AE specification 0W-20 lubricant. Please refer to your owners handbook

Advantages

Castrol EDGE 0W-20 V with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low temperature performance

Product Performance Claims

• ACEA C5
• Volvo VCC RBS0-2AE

• Castrol EDGE 0W-20 V is suitable for petrol, diesel and hybrid cars and designed to meet the latest specifications required by modern engines where the vehicle manufacturer recommends an ACEA C5 0W-20 lubricant
• Engines are complex, with many moving parts – movement that can waste useful fuel energy through inefficiency. With these losses, power can be impacted. The challenge is to maintain the high performance levels expected by drivers, whilst engine technology adapts to meet the demanding legislative limits.
• With worldwide emissions regulations tightening there is a renewed challenge to produce more power whilst still improving engine efficiency. Never before has engine oil played such a key role to deliver performance.
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Demonstrates improved performance as a result of better fuel economy
• Delivers more horsepower and greater acceleration
• Stronger under pressure in today’s modern engines

• Product Performance Claims: ACEA C5, Volvo VCC RBS0-2AE

Technical Information

Engine oils: Motorcycle Motorcycle 4T eng oil -- Synthetic

• Castrol POWER1 ULTIMATE is suitable for all makes of 4-stroke bikes, both carburetor or fuel injected where JASO MA or MA2 are recommended.
• Castrol POWER1 ULTIMATE’s 5-in-1 formula delivers:
• 1. Excellent acceleration
• 2. Excellent protection
• 3. Smooth riding
• 4. Keeps the engine cool on long rides
• 5. Enduring performance Complies with requirements of catalyst equipped engines. Acceleration benefits will be subject to riding style and oil viscosity grade

• Performance- API SL JASO MA2

Technical Information

Engine oils: Motorcycle Motorcycle 4T eng oil -- Synthetic

• Castrol POWER1 ULTIMATE is suitable for all makes of 4-stroke bikes, both carburetor or fuel injected where JASO MA or MA2 are recommended.
• Castrol POWER1 ULTIMATE’s 5-in-1 formula delivers:
• 1. Excellent acceleration
• 2. Excellent protection
• 3. Smooth riding
• 4. Keeps the engine cool on long rides
• 5. Enduring performance Complies with requirements of catalyst equipped engines. Acceleration benefits will be subject to riding style and oil viscosity grade

• Performance- API SL JASO MA2

Technical Information

Engine oils: Commercial Vehicle Com Veh eng oil -- synthetic

Castrol Vecton Long Drain 10W-40 E6/E9 is a full synthetic low SAPS engine oil formulated with unique System 5 TechnologyTM for up to 40% better performance1. It is also engineered for extended oil drain up to 100,000km2 in the latest European diesel engines including Euro 6 and engines fitted with DPF, in accordance with OEM specifications.

Application
Castrol Vecton Long Drain 10W-40 E6/E9 is designed for extended drain in the latest Euro 6 diesel engines. It can also be used in low emission Euro 4 & Euro 5 European trucks and buses, especially those requiring a low SAPS lubricant and in older on-road and off-road vehicles and equipment that require this performance level.

Advantages

Modern engines operate in constantly changing conditions which impacts engine performance. Castrol Vecton Long Drain 10W-40 E6/E9's unique System 5 TechnologyTM adapts to these changing conditions to help maximise engine performance. It provides exceptional resistance to contaminants and delivers outstanding performance when you run extended drains, even under severe operating conditions.

System 5 TechnologyTM helps to maximise engine performance throughout extended drain intervals:

• Fights harmful acids which form during engine operation, maintaining TBN reserve throughout the oil drain
• Fights wear to critical engine components
• Fights piston deposits even under severe operating conditions.

Castrol Vecton Long Drain10W-40 E6/E9 is approved by Mercedes Benz, Renault, Volvo and Deutz for oil drain up to 100,000 Km2, in accordance with their specifications.

1. In independent laboratory tests, Castrol Vecton Long Drain 10W-40 E6/E9 performed up to 40% better than API and ACEA industry standard limits across oil thickening, piston deposits, soot handling and wear and corrosion.

2. Actual oil drain depends on engine type, operating conditions, service history, use of on-board diagnostics and fuel quality. Always consult your manufacturer's handbook.

Product Performance Claims

• ACEA E6, E7, E9
• API CJ-4
• JASO DH-2
• CAT ECF-3
• Cummins CES 20081
• Deutz DQC IV-10LA
• Mack EO-O Premium Plus, EOS-4.5
• MB-Approval 228.51
• MTU Oil Category 3.1
• RVI RLD-3
• Volvo CNG, VDS-4, VDS-4.5
• Meets requirements of MAN M 3271-

• It is suitable for highly rated diesel engines meeting Euro I to Euro VI emission requirements
• It is strongly recommended for engines fitted with particulate filters and is designed for use in combination with low sulphur diesel fuel
• Castrol VECTON Long Drain with System Pro Technology is specifically engineered and tested for extended drains up to 120,000 km*.

• ACEA E6, E7, E9, API CJ-4
• JASO DH-2, CAT ECF-3, Cummins CES 20081, Deutz DQC IV-10LA, Mack EO-O Premium Plus, EOS-4.5, MB-Approval 228.51, MTU Oil Category 3.1, RVI RLD-3
• Volvo CNG, VDS-4, VDS-4.5, Meets requirements of MAN M 3271-1, M 3477
• For Iveco trucks requiring ACEA E6, E7 and E9, Meets DAF Euro VI requirements

Technical Information

Engine oils: Commercial Vehicle Com Veh eng oil -- synthetic

Castrol Vecton Long Drain 10W-40 E6/E9 is a full synthetic low SAPS engine oil formulated with unique System 5 TechnologyTM for up to 40% better performance1. It is also engineered for extended oil drain up to 100,000km2 in the latest European diesel engines including Euro 6 and engines fitted with DPF, in accordance with OEM specifications.

Application
Castrol Vecton Long Drain 10W-40 E6/E9 is designed for extended drain in the latest Euro 6 diesel engines. It can also be used in low emission Euro 4 & Euro 5 European trucks and buses, especially those requiring a low SAPS lubricant and in older on-road and off-road vehicles and equipment that require this performance level.

Advantages

Modern engines operate in constantly changing conditions which impacts engine performance. Castrol Vecton Long Drain 10W-40 E6/E9's unique System 5 TechnologyTM adapts to these changing conditions to help maximise engine performance. It provides exceptional resistance to contaminants and delivers outstanding performance when you run extended drains, even under severe operating conditions.

System 5 TechnologyTM helps to maximise engine performance throughout extended drain intervals:

• Fights harmful acids which form during engine operation, maintaining TBN reserve throughout the oil drain
• Fights wear to critical engine components
• Fights piston deposits even under severe operating conditions.

Castrol Vecton Long Drain10W-40 E6/E9 is approved by Mercedes Benz, Renault, Volvo and Deutz for oil drain up to 100,000 Km2, in accordance with their specifications.

1. In independent laboratory tests, Castrol Vecton Long Drain 10W-40 E6/E9 performed up to 40% better than API and ACEA industry standard limits across oil thickening, piston deposits, soot handling and wear and corrosion.

2. Actual oil drain depends on engine type, operating conditions, service history, use of on-board diagnostics and fuel quality. Always consult your manufacturer's handbook.

Product Performance Claims

• ACEA E6, E7, E9
• API CJ-4
• JASO DH-2
• CAT ECF-3
• Cummins CES 20081
• Deutz DQC IV-10LA
• Mack EO-O Premium Plus, EOS-4.5
• MB-Approval 228.51
• MTU Oil Category 3.1
• RVI RLD-3
• Volvo CNG, VDS-4, VDS-4.5
• Meets requirements of MAN M 3271-

• It is suitable for highly rated diesel engines meeting Euro I to Euro VI emission requirements
• It is strongly recommended for engines fitted with particulate filters and is designed for use in combination with low sulphur diesel fuel
• Castrol VECTON Long Drain with System Pro Technology is specifically engineered and tested for extended drains up to 120,000 km*.

• ACEA E6, E7, E9, API CJ-4
• JASO DH-2, CAT ECF-3, Cummins CES 20081, Deutz DQC IV-10LA, Mack EO-O Premium Plus, EOS-4.5, MB-Approval 228.51, MTU Oil Category 3.1, RVI RLD-3
• Volvo CNG, VDS-4, VDS-4.5, Meets requirements of MAN M 3271-1, M 3477
• For Iveco trucks requiring ACEA E6, E7 and E9, Meets DAF Euro VI requirements

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times a year. That's annoying, but worse, it slowly damages your engine - permanently.

Castrol MAGNATEC's unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

• Form a powerful force field of protection
• Dramatically reduce both warm-up and stop-start wear by 50%
• Deliver unique protection designed specifically for modern driving

Castrol MAGNATEC. Non-stop protection from every start.

Application

Castrol MAGNATEC 0W-30 D is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C2 0W-30 lubricant.

Castrol MAGNATEC 0W-30 D is suitable for use in vehicles that require a 0W-30 lubricant that Meets Ford WSSM2C950-A specification.

Product Performance Claims

• ACEA C2
• Meets Ford WSS-M2C950-A

• Castrol MAGNATEC 0W-30 D is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C2 0W-30 lubricant.
• Castrol MAGNATEC clings like a magnet to critical engine parts and locks in place to deliver 50% better engine wear protection*. Helping to safeguard your engine’s vital components - the valvetrain, timing chain, pistons, and bearings - from damage and wear.
• Forms a resistive barrier between metal contact points in the valvetrain
• Manages abrasive piston deposits, guarding against cylinder liner wear
• Maintains timing chain tension and engine synchronicity by minimising chain damage and elongation
• reserves engine bearings from corrosive wear

• Product Performance Claims: ACEA C2 Meets - Ford WSS-M2C950-A VWC 53035