Car Parts & Accessories by Laser

General Information

Timing Tool Kit - 1.3 JTD/HDi Fiat, GM, Suzuki, Ford, PSA

• Application: 1.3 JTD/HDi Diesel engines found in Fiat, GM, Suzuki, Ford, Citroen Nemo and Peugeot Bipper
• Timing tool kit with Camshaft/Crankshaft alignment tools only
• Made in Sheffield
• Full Engine rebuild kit available part number 4773
• Use 6408 (Camshaft Holding Tool) if removing camshaft drive gears

General Information

Timing Tool Kit - Ford 1.25, 1.4, 1.6 16V, 1.5, 1.6 TI-VCT

• Made in Sheffield
• Also relevant to the Mazda and Volvo ranges
• Suitable for use with the following replacement belt kits INA530014010, Contitech CT881K2, Gates K025433XS
• This kit includes the alignment tool for VVT system found on many of these engines which extends the kits coverage from 1996 to 2010
• The essential camshaft and crankshaft alignment tools for the popular 1.25, 1.4, 1.6 Ford, petrol, engines

General Information

Ribe Socket Set 1/2"D 3pc

• Sizes: 6S, 8S, 12S
• Manufactured from Chrome Vanadium with Phosphate finish
• For clutches, cylinder heads and balance shaft fixings etc
• Applications: Nissan, Renault
• 1/2in. Drive

General Information

Fuel Filter Wrench 88mm x 15 Flats

• Pressed steel construction
• Equivalent to Honda OEM 070AA-RL00200
• 88mm (point to flat) x 15 flutes 3/8”D
• Applications include: Honda I-dtec diesel fuel filter
• Also suitable for oil filter removal where dimensions match (Hyundai/Kia 3.3 and 3.8 V6 petrol)

General Information

Engine Cylinder Hone 51-250mm. Engine Cylinder Hone 51-250mm

• Use with cordless drill for efficient results
• Replacement stone set Laser Part No. 2071 (consumable)
• Flexible self-aligning shaft allows use without removing cylinder
• Cleans and de glazes cylinders of carbon deposits quickly and effectively
• Adjusts from 51mm to 260mm

General Information

Insulated Safety Clamp 1000v

• Dimensions: Length 140mm
• For use with insulated shrouding to hold the shroud in situ
• Jaw opening 45mm
• Rubber contacts in the jaw protect the insulating shroud
• Weight 52 grams

General Information

High Voltage Floor Matting - 1 Metre. High Voltage Floor Matting - 1 Metre

• Flame retardant oil and acid resistant insulated floor matting
• Tested to IEC611111 Class 2 rated for working voltages up to 17kV
• Ribbed on the underside fabric impression on upper side

• Dimensions: Width 1000mm, Thickness 3.00mm, Weight 4.0kgs per metre

General Information

Glove Storage Bag. Glove Storage Bag

General Information

Cable End Shroud with Grip Collar - 15mm. Cable End Shroud with Grip Collar - 15mm

• 15mm diameter opening x 100mm length
• Also available: 25mm x 110mm length and 35mm x 130mm length
• Flexible gripping collar prevents damage to the cable insulation
• Push on shrouds for un-insulated cable ends - 1000v insulated
• Will also fit over cable connectors and lugs

General Information

Cable End Shroud with Grip Collar - 35mm. Cable End Shroud with Grip Collar - 35mm

• 35mm diameter x 130mm length
• Also available: 15mm x 100mm length and 25mm x 110mm length
• Flexible gripping collar prevents damage to the cable insulation
• Push on shrouds for un-insulated cable ends - 1000v insulated
• Will also fit over cable connectors and lugs

General Information

Protective Arc Flash Face Shield - 1000V rated

• Protects against electric arcs caused by short circuits
• Protective face screen for use without helmet
• Polycarbonate screen with anti-mist treatment
• CE certificated with EN166/EN170, 1000v rated
• Adjustable headband for comfort

General Information

Protective Faceshield Bag. Protective Faceshield Bag

General Information

High Voltage/No Admittance Sign. High Voltage/No Admittance Sign

• Conforms to BS5499 for safety signs
• Made from 1.2mm rigid plastic with two holes for fixing to chains, walls etc
• Satin finish suitable for both indoor and outdoor use

General Information

Safety Tag- DO NOT START Safety Tag- DO NOT START.

• Can be used in conjunction with safety lockout padlock
• Durable plastic construction
• Part of the Hybrid range but also useful with engine timing and locking tools
• Resists chemicals, abrasion, grease and solvents
• Self-adhesive overlay on back of tag, allows for authorised employee name to be written

General Information

Brake Pad Thickness Gauge

• Manufactured from Aluminium
• Gives a quick reference to brake pad condition
• Easy to read colour coded scale

General Information

Glow Plug Socket Set 1/4"D 3pc Glow Plug Socket Set 1/4"D 3pc.

• Sizes: 8mm, 9mm, 10mm
• Features 1/4in. Drive and universal joint
• Manufactured from Chrome Vanadium
• Super slim for improved access in tight areas

General Information

Spanner Extension Wrench Spanner Extension Wrench.

• Gloves and goggles should be used in high powered situations
• Manufactured from Chrome Vanadium with high Chromed finish
• Universal use
• Length 385mm
• Extends the length of spanners when you need more leverage

General Information

For VAG 1.4/1.6/2.0 TDI CR engines from approx. 2012 onwards Includes tooling for timing the camshaft gears. Supplied in a metal case with foam inner. Made in UK

• Crankshaft Timing Tool and Locking Pin (C695) EU Registered Design
• Supplied in a metal case
• Includes tooling for timing the camshaft gears
• Offers 1.4/1.6/2.0 TDi CRD coverage from 2012 onwards
• Tools equivalent to OEM: T10265, T10264, T10492, T10409, T10064A, T10051
• Applications: Audi A3 III, A4, Seat Leon III, Volkswagen Golf VII and Skoda Octavia 2012-2016 with engine codes: 1.4 CUSA, CUSB, CUTA and 2.0 CKFC, CKFB, CRBC, CRBD, CRFA, CRFC, CRLB, CRLC, CRMB, CRVA, CRVC, CSUA, CSUB, CUNA, CUPA

General Information

Fuel Injection Pump Sprocket Locking Tool - for Ford Transit

• Maintains engine timing and timing chain position while permitting removal of the fuel pump
• Use with Ford OEM tools 303-679 (found in Laser 6191) and 303-249 (found in Laser 5825)
• Equivalent to OEM 303-1317
• Engine found in: Ford Transit and Ford Ranger
• Applications: 2.2 & 3.2 TDCi Duratorq engines from 2006 onwards

• Manufactured from Chrome Vanadium
• 6pt (Single Hex)
• 1/2in. Drive
• For use with Air Impact Tools

General Information

Rear Swinging Arm Bush Tool - for Ford

• Designed and manufactured in Sheffield
• Force Screw replacement Part No: Laser 1319, Nut Assembly replacement - Laser 1803
• Supplied with Molybdenum Disulphide grease for extended force screw life
• Designed to be used on car with the minimal strip down reducing the time taken to replace worn bushes (Bush Nos: 1 535 296/1 805 815)
• Application Ford Fiesta MK VI 2008 onwards

• Bush Nos: 1 535 296/1 805 815

General Information

Flameless Hot Air Blower. Flameless Hot Air Blower

• Net weight without gas 68 grams. Dimensions 110 x 27 x 85mm
• Fueled by 5.5ml butane gas which is available from newsagents and supermarkets (cigarette lighter gas)
• Includes heat shrinking tubes
• Run time approximately 20-25 minutes (at mid setting)
• Variable heat/temperature range up to 650 degrees C
• Features: Instant electronic ignition, refillable tank with see through window, stable catalytic heating system. Stable catalystic heating system

• Variable heat/temperature range up to 650 degrees C
• Run time approximately 20-25 minute
• Net weight without gas 68 grams
• Dimensions 110 x 27 x 85mm

General Information

Engine Locking Kit VAG 1.2TSi/TFSI Petrol Engines. Engine Locking Kit VAG 1.2TSi/TFSI Petrol Engines

• Made in Sheffield
• The kit also includes 2 x guide pins required for the removal and fitting of the supercharger
• Engine locking kit - VAG 1.2 TSi/TFSi petrol engines (2009-2016)

• Equivalent to OEM tool codes T10340, T10414 and T10341
• Engine codes CBZA, CBZB, CBZC

General Information

Measuring Jug - 5 Litre. Measuring Jug - 5 Litre

• Manufactured from Polyethylene
• Suitable for oil, water, Ad Blue, coolant, petrol, diesel etc.
• Measuring Jug with Quart and Litre measurements

General Information

Measuring Jug 10 Litre. Measuring Jug 10 Litre

• Manufactured from Polyethylene
• Suitable for oil, water, Ad Blue, coolant, petrol, diesel etc.
• Measuring Jug with Quart and Litre measurements

General Information

Safety Locking Wire 0.8mm x 30m. Safety Locking Wire 0.8mm x 30m

• Safety wiring also serves as a visual indicator that the fasteners have been properly tightened
• Lock wire or safety wire is a type of positive locking device that prevents fasteners from loosening due to vibration as well as other forces
• Ideal for motor racing applications
• Supplied on a plastic dispenser
• Length 30m
• Stainless steel locking wire 0.8mm

General Information

Flexible Crows Foot Wrench 1/2"D 22mm

• Manufactured from satin finish Chrome Vanadium
• 1/2in. Drive x 6 pt Single Hex
• Traditional flare nut wrench and crowfoot functionality
• Offers better access than traditional fixed crows foot wrench
• Suitable for 22mm hydraulic, fuel, oil lines, A/C components, O2 sensor etc.

General Information

Cambelt Timing Tool Kit Ford 1.0GTDI Cambelt Timing Tool Kit Ford 1.0GTDI.

• Made in Sheffield
• Camshaft Locking blocks are EU Registered design
• Where the VCT pulleys require removing or setting the additional kit Part 6291 will be required

• Applications: Ford 1.0lt 3cyl Turbo charged EcoBoost engine from 2012<
• Equivalent to OEM 303-732, 303-1054, 303-1602, 303-1603, 303-1604, 303-1605/1, 303-1605/2
• GTDi engines found in Ford B-Max, C-Max, Fiesta, Focus, Grand C-Max, Transit Connect

General Information

Cambelt Timing Tool Kit Ford 1.0GTDI Cambelt Timing Tool Kit Ford 1.0GTDI.

• Made in Sheffield
• Camshaft Locking blocks are EU Registered design
• Where the VCT pulleys require removing or setting the additional kit Part 6291 will be required

• Applications: Ford 1.0lt 3cyl Turbo charged EcoBoost engine from 2012<
• Equivalent to OEM 303-732, 303-1054, 303-1602, 303-1603, 303-1604, 303-1605/1, 303-1605/2
• GTDi engines found in Ford B-Max, C-Max, Fiesta, Focus, Grand C-Max, Transit Connect

General Information

Oil Filter Wrench Set 3/8"D 2pc