Car Parts & Accessories by Laser

General Information

Engine Timing Tool Kit - for VAG 1.0, 1.2, 1.4L

General Information

EU Registered Design

General Information

Fuel Filter Wrench 88mm x 15 Flats

• Pressed steel construction
• Equivalent to Honda OEM 070AA-RL00200
• 88mm (point to flat) x 15 flutes 3/8”D
• Applications include: Honda I-dtec diesel fuel filter
• Also suitable for oil filter removal where dimensions match (Hyundai/Kia 3.3 and 3.8 V6 petrol)

General Information

Engine Cylinder Hone 51-250mm. Engine Cylinder Hone 51-250mm

• Use with cordless drill for efficient results
• Replacement stone set Laser Part No. 2071 (consumable)
• Flexible self-aligning shaft allows use without removing cylinder
• Cleans and de glazes cylinders of carbon deposits quickly and effectively
• Adjusts from 51mm to 260mm

General Information

Insulated Safety Clamp 1000v

• Dimensions: Length 140mm
• For use with insulated shrouding to hold the shroud in situ
• Jaw opening 45mm
• Rubber contacts in the jaw protect the insulating shroud
• Weight 52 grams

General Information

High Voltage Floor Matting - 1 Metre. High Voltage Floor Matting - 1 Metre

• Flame retardant oil and acid resistant insulated floor matting
• Tested to IEC611111 Class 2 rated for working voltages up to 17kV
• Ribbed on the underside fabric impression on upper side

• Dimensions: Width 1000mm, Thickness 3.00mm, Weight 4.0kgs per metre

General Information

Glove Storage Bag. Glove Storage Bag

General Information

Cable End Shroud with Grip Collar - 15mm. Cable End Shroud with Grip Collar - 15mm

• 15mm diameter opening x 100mm length
• Also available: 25mm x 110mm length and 35mm x 130mm length
• Flexible gripping collar prevents damage to the cable insulation
• Push on shrouds for un-insulated cable ends - 1000v insulated
• Will also fit over cable connectors and lugs

General Information

Cable End Shroud with Grip Collar - 35mm. Cable End Shroud with Grip Collar - 35mm

• 35mm diameter x 130mm length
• Also available: 15mm x 100mm length and 25mm x 110mm length
• Flexible gripping collar prevents damage to the cable insulation
• Push on shrouds for un-insulated cable ends - 1000v insulated
• Will also fit over cable connectors and lugs

General Information

Protective Arc Flash Face Shield - 1000V rated

• Protects against electric arcs caused by short circuits
• Protective face screen for use without helmet
• Polycarbonate screen with anti-mist treatment
• CE certificated with EN166/EN170, 1000v rated
• Adjustable headband for comfort

General Information

Protective Faceshield Bag. Protective Faceshield Bag

General Information

High Voltage/No Admittance Sign. High Voltage/No Admittance Sign

• Conforms to BS5499 for safety signs
• Made from 1.2mm rigid plastic with two holes for fixing to chains, walls etc
• Satin finish suitable for both indoor and outdoor use

General Information

Plastic 6mm Chain 25mtrs. Plastic 6mm Chain 25mtrs

• Chain size 6mm x 25mtrs
• Red and White for high visibility
• Use with Laser Posts and Bases - Part 6643/6644

General Information

Safety Tag- DO NOT START Safety Tag- DO NOT START.

• Can be used in conjunction with safety lockout padlock
• Durable plastic construction
• Part of the Hybrid range but also useful with engine timing and locking tools
• Resists chemicals, abrasion, grease and solvents
• Self-adhesive overlay on back of tag, allows for authorised employee name to be written

General Information

Brake Pad Thickness Gauge

• Manufactured from Aluminium
• Gives a quick reference to brake pad condition
• Easy to read colour coded scale

General Information

Glow Plug Socket Set 1/4"D 3pc Glow Plug Socket Set 1/4"D 3pc.

• Sizes: 8mm, 9mm, 10mm
• Features 1/4in. Drive and universal joint
• Manufactured from Chrome Vanadium
• Super slim for improved access in tight areas

General Information

Spanner Extension Wrench Spanner Extension Wrench.

• Gloves and goggles should be used in high powered situations
• Manufactured from Chrome Vanadium with high Chromed finish
• Universal use
• Length 385mm
• Extends the length of spanners when you need more leverage

General Information

For VAG 1.4/1.6/2.0 TDI CR engines from approx. 2012 onwards Includes tooling for timing the camshaft gears. Supplied in a metal case with foam inner. Made in UK

• Crankshaft Timing Tool and Locking Pin (C695) EU Registered Design
• Supplied in a metal case
• Includes tooling for timing the camshaft gears
• Offers 1.4/1.6/2.0 TDi CRD coverage from 2012 onwards
• Tools equivalent to OEM: T10265, T10264, T10492, T10409, T10064A, T10051
• Applications: Audi A3 III, A4, Seat Leon III, Volkswagen Golf VII and Skoda Octavia 2012-2016 with engine codes: 1.4 CUSA, CUSB, CUTA and 2.0 CKFC, CKFB, CRBC, CRBD, CRFA, CRFC, CRLB, CRLC, CRMB, CRVA, CRVC, CSUA, CSUB, CUNA, CUPA

• Manufactured from Chrome Vanadium
• 6pt (Single Hex)
• 1/2in. Drive
• For use with Air Impact Tools

General Information

Rear Swinging Arm Bush Tool - for Ford

• Designed and manufactured in Sheffield
• Force Screw replacement Part No: Laser 1319, Nut Assembly replacement - Laser 1803
• Supplied with Molybdenum Disulphide grease for extended force screw life
• Designed to be used on car with the minimal strip down reducing the time taken to replace worn bushes (Bush Nos: 1 535 296/1 805 815)
• Application Ford Fiesta MK VI 2008 onwards

• Bush Nos: 1 535 296/1 805 815

General Information

Flameless Hot Air Blower. Flameless Hot Air Blower

• Net weight without gas 68 grams. Dimensions 110 x 27 x 85mm
• Fueled by 5.5ml butane gas which is available from newsagents and supermarkets (cigarette lighter gas)
• Includes heat shrinking tubes
• Run time approximately 20-25 minutes (at mid setting)
• Variable heat/temperature range up to 650 degrees C
• Features: Instant electronic ignition, refillable tank with see through window, stable catalytic heating system. Stable catalystic heating system

• Variable heat/temperature range up to 650 degrees C
• Run time approximately 20-25 minute
• Net weight without gas 68 grams
• Dimensions 110 x 27 x 85mm

General Information

Measuring Jug - 5 Litre. Measuring Jug - 5 Litre

• Manufactured from Polyethylene
• Suitable for oil, water, Ad Blue, coolant, petrol, diesel etc.
• Measuring Jug with Quart and Litre measurements

General Information

Measuring Jug 10 Litre. Measuring Jug 10 Litre

• Manufactured from Polyethylene
• Suitable for oil, water, Ad Blue, coolant, petrol, diesel etc.
• Measuring Jug with Quart and Litre measurements

General Information

Safety Locking Wire 0.8mm x 30m. Safety Locking Wire 0.8mm x 30m

• Safety wiring also serves as a visual indicator that the fasteners have been properly tightened
• Lock wire or safety wire is a type of positive locking device that prevents fasteners from loosening due to vibration as well as other forces
• Ideal for motor racing applications
• Supplied on a plastic dispenser
• Length 30m
• Stainless steel locking wire 0.8mm

General Information

Cambelt Timing Tool Kit Ford 1.0GTDI Cambelt Timing Tool Kit Ford 1.0GTDI.

• Made in Sheffield
• Camshaft Locking blocks are EU Registered design
• Where the VCT pulleys require removing or setting the additional kit Part 6291 will be required

• Applications: Ford 1.0lt 3cyl Turbo charged EcoBoost engine from 2012<
• Equivalent to OEM 303-732, 303-1054, 303-1602, 303-1603, 303-1604, 303-1605/1, 303-1605/2
• GTDi engines found in Ford B-Max, C-Max, Fiesta, Focus, Grand C-Max, Transit Connect

General Information

Cambelt Timing Tool Kit Ford 1.0GTDI Cambelt Timing Tool Kit Ford 1.0GTDI.

• Made in Sheffield
• Camshaft Locking blocks are EU Registered design
• Where the VCT pulleys require removing or setting the additional kit Part 6291 will be required

• Applications: Ford 1.0lt 3cyl Turbo charged EcoBoost engine from 2012<
• Equivalent to OEM 303-732, 303-1054, 303-1602, 303-1603, 303-1604, 303-1605/1, 303-1605/2
• GTDi engines found in Ford B-Max, C-Max, Fiesta, Focus, Grand C-Max, Transit Connect

General Information

Oil Filter Wrench Set 3/8"D 2pc

General Information

Sharks Teeth Spanner Organiser - 20 Spanners

• 420mm long (595mm version available - Part No 6976)
• Two individual strips for spanner length selection
• Holds 20 Spanners
• Manufactured from composite material with adhesive strips
• Ideal for organising tool cabinet drawers
• Sharks teeth spanner organiser takes 20 spanners 420mm long

General Information

Sharks Teeth Spanner Organiser - 35 Spanners

General Information

Budd Wheel Nut Socket 21mm Sq. Budd Wheel Nut Socket 21mm Sq

• Suitable for front and rear axle wheels on many imported trucks including Isuzu, Mitsubishi Fuso and Hino
• Impact quality manufactured from Chrome Molybdenum with black phosphate finish
• Extra deep design allows removal of stud and nut
• Length 90mm x 3/4in.D
• Budd wheel nut socket 21mm square (4pt)

General Information

Difficult Access Funnel

• Manufactured from PP Plastic
• Car and van applications include: Brake Master Cylinders on Ford Mondeo, Ford Transit, Vauxhall Insignia & Vauxhall Corsa
• Angled access - reach 240mm
• Funnel diameter 145mm x 135mm deep
• Cranked spout for easy access on dificult to reach filling points on brake master cylinders and motorcycle engine oil fillers