Car Parts & Accessories by NAPA
Categories
Important compatibility info
Length | 940 mm |
External Teeth, Wheel Side | 29 |
External Teeth, Diff.Side | 26 |
Length 2 | 300 mm |
Function | Drive Shaft |
Type | Drive Shaft |
Placement on Vehicle | Front Axle Right |
Important compatibility info
Length | 940 mm |
External Teeth, Wheel Side | 29 |
External Teeth, Diff.Side | 26 |
Length 2 | 300 mm |
Function | Drive Shaft |
Type | Drive Shaft |
Placement on Vehicle | Front Axle Right |
Important compatibility info
Type | Shock Absorber |
Function | Shock Absorber |
Shock Absorber Mounting Type | Bottom eye, Top pin |
Shock Absorber Design | Damper with Rebound Spring |
Shock Absorber System | Twin-Tube |
Shock Absorber Type | Gas Pressure |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
Type | Shock Absorber |
Function | Shock Absorber |
Shock Absorber Mounting Type | Bottom eye, Top pin |
Shock Absorber Design | Damper with Rebound Spring |
Shock Absorber System | Twin-Tube |
Shock Absorber Type | Gas Pressure |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
Function | Starter |
Voltage | 12 V |
Number of Teeth | 8 |
Number of mounting bores | 2 |
Type | Starter |
Number of Thread Bores | 2 |
Rated Power | 1.7 kW |
Important compatibility info
Function | Starter |
Voltage | 12 V |
Number of Teeth | 8 |
Number of mounting bores | 2 |
Type | Starter |
Number of Thread Bores | 2 |
Rated Power | 1.7 kW |
Important compatibility info
Diameter | 200 mm |
Additional Information | with central slave cylinder |
Type | Clutch Kit |
Function | Clutch Kit |
Important compatibility info
Diameter | 200 mm |
Additional Information | with central slave cylinder |
Type | Clutch Kit |
Function | Clutch Kit |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Rear Axle Left, Lower |
Type | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Paired article numbers | NST3175 |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Rear Axle Left, Lower |
Type | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Paired article numbers | NST3175 |
Important compatibility info
Placement on Vehicle | Front Axle |
Height | Discs: 64 mm |
Width | Pads: 146 mm |
Outer diameter | Discs: 295 mm |
Thickness | Pads: 21 mm |
Additional Information 2 | Pads: with bolts |
Brake Disc Thickness | Discs: 28 mm |
Number of Holes | Discs: 5 |
Brake System | Pads: TRW |
Wear Warning Contact | Pads: prepared for wear indicator |
Bolt Hole Circle Diameter | Discs: 112 mm |
Centering Diameter | Discs: 67 mm |
Height 1 | Pads: 71 mm |
Manufacturer | MERCEDES |
Rotor Style | Discs: Vented |
Important compatibility info
Placement on Vehicle | Front Axle |
Height | Discs: 64 mm |
Width | Pads: 146 mm |
Outer diameter | Discs: 295 mm |
Thickness | Pads: 21 mm |
Additional Information 2 | Pads: with bolts |
Brake Disc Thickness | Discs: 28 mm |
Number of Holes | Discs: 5 |
Brake System | Pads: TRW |
Wear Warning Contact | Pads: prepared for wear indicator |
Bolt Hole Circle Diameter | Discs: 112 mm |
Centering Diameter | Discs: 67 mm |
Height 1 | Pads: 71 mm |
Manufacturer | MERCEDES |
Rotor Style | Discs: Vented |
Important compatibility info
Pulleys | without belt pulley |
Function | Alternator |
Belt Pulley Diameter | 68 mm |
Alternator Charge Current | 90 A |
Rotation Direction | Clockwise rotation |
Manufacturer Restriction | Bosch |
Number of Ribs | 6 |
Type | Alternator |
Voltage | 12 V |
Important compatibility info
Pulleys | without belt pulley |
Function | Alternator |
Belt Pulley Diameter | 68 mm |
Alternator Charge Current | 90 A |
Rotation Direction | Clockwise rotation |
Manufacturer Restriction | Bosch |
Number of Ribs | 6 |
Type | Alternator |
Voltage | 12 V |
Important compatibility info
Function | Alternator |
Belt Pulley Diameter | 55 mm |
Alternator Charge Current | 100 A |
Number of Ribs | 6 |
Pulleys | without belt pulley |
Rotation Direction | Clockwise rotation |
Manufacturer Restriction | Delco |
Type | Alternator |
Voltage | 12 V |
Replaces | NAL1459 |
Important compatibility info
Function | Alternator |
Belt Pulley Diameter | 55 mm |
Alternator Charge Current | 100 A |
Number of Ribs | 6 |
Pulleys | without belt pulley |
Rotation Direction | Clockwise rotation |
Manufacturer Restriction | Delco |
Type | Alternator |
Voltage | 12 V |
Replaces | NAL1459 |
Important compatibility info
Manufacturer Restriction | Valeo |
Function | Starter |
Rated Power | 2.2 kW |
Voltage | 12 V |
Number of Teeth | 12 |
Type | Starter |
Important compatibility info
Manufacturer Restriction | Valeo |
Function | Starter |
Rated Power | 2.2 kW |
Voltage | 12 V |
Number of Teeth | 12 |
Type | Starter |
Important compatibility info
Voltage | 12 V |
Number of mounting bores | 2 |
Rated Power | 1.2 kW |
Number of Teeth | 11 |
Type | Starter |
Function | Starter |
Important compatibility info
Voltage | 12 V |
Number of mounting bores | 2 |
Rated Power | 1.2 kW |
Number of Teeth | 11 |
Type | Starter |
Function | Starter |
Important compatibility info
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Right |
Paired article numbers | NST3309 |
Important compatibility info
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Right |
Paired article numbers | NST3309 |
Important compatibility info
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Number of Teeth | 20 |
Operating Mode | Mechanical |
Number of Wings | 8 |
Water Pump Pulley Diameter | 48 mm |
Important compatibility info
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Number of Teeth | 20 |
Operating Mode | Mechanical |
Number of Wings | 8 |
Water Pump Pulley Diameter | 48 mm |
Important compatibility info
Length | 930 mm |
External Teeth, Wheel Side | 25 |
External Teeth, Diff.Side | 26 |
Length 2 | 310 mm |
Function | Drive Shaft |
Type | Drive Shaft |
Placement on Vehicle | Front Axle Right |
Important compatibility info
Length | 930 mm |
External Teeth, Wheel Side | 25 |
External Teeth, Diff.Side | 26 |
Length 2 | 310 mm |
Function | Drive Shaft |
Type | Drive Shaft |
Placement on Vehicle | Front Axle Right |
Important compatibility info
Length | 630 mm |
Function | Drive Shaft |
External Teeth, Wheel Side | 28 |
External Teeth, Diff.Side | 25 |
Number of Teeth, ABS ring | 60 |
Type | Drive Shaft |
Placement on Vehicle | Front Axle Left |
Important compatibility info
Length | 630 mm |
Function | Drive Shaft |
External Teeth, Wheel Side | 28 |
External Teeth, Diff.Side | 25 |
Number of Teeth, ABS ring | 60 |
Type | Drive Shaft |
Placement on Vehicle | Front Axle Left |
Important compatibility info
Length | 393 mm |
Height | 190 mm |
Width | 175 mm |
Voltage | 12 V |
Ampere-Hours | 110 Ah |
Cold-test Current, EN | 900 A |
Type | Starter Battery |
Function | Starter Battery |
Extra Description | NAPA Battery |
Hold-down Type | B13 |
Terminal Type | T1 |
Battery Type Code | 020 |
Title | NAPA High Power Battery 12V - 110Ah - 900A |
Warranty | 5 year warranty |
Additional Information
- OE Equivalent - Original quality spare part – Produced on the same production lines that make batteries for Original Equipment, using the same technology, man power, equipment, controls and quality inspections approved by the car manufacturers to whom they are supplied.
- Heavy Duty Performance - Ensures a high standard of performance from the battery to meet the users requirements.
- Diesel Approved - The standard range is approved for all diesel vehicles.
- Long Life - Specifically designed with Calcium/Calcium technology to extend the life of the battery.
Important compatibility info
Length | 393 mm |
Height | 190 mm |
Width | 175 mm |
Voltage | 12 V |
Ampere-Hours | 110 Ah |
Cold-test Current, EN | 900 A |
Type | Starter Battery |
Function | Starter Battery |
Extra Description | NAPA Battery |
Hold-down Type | B13 |
Terminal Type | T1 |
Battery Type Code | 020 |
Title | NAPA High Power Battery 12V - 110Ah - 900A |
Warranty | 5 year warranty |
Additional Information
- OE Equivalent - Original quality spare part – Produced on the same production lines that make batteries for Original Equipment, using the same technology, man power, equipment, controls and quality inspections approved by the car manufacturers to whom they are supplied.
- Heavy Duty Performance - Ensures a high standard of performance from the battery to meet the users requirements.
- Diesel Approved - The standard range is approved for all diesel vehicles.
- Long Life - Specifically designed with Calcium/Calcium technology to extend the life of the battery.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023