Car Parts & Accessories by NAPA
Categories
Important compatibility info
Placement on Vehicle | Rear Axle |
Height | Discs: 88 mm |
Width | Pads: 95 mm |
Outer diameter | Discs: 274 mm |
Thickness | Pads: 16 mm |
Additional Information 2 | Discs: with ABS sensor ring, with wheel bearing; Pads: with bolts |
Brake Disc Thickness | Discs: 11 mm |
Number of Holes | Discs: 5 |
Brake System | Pads: TRW |
Wear Warning Contact | Pads: not prepared for wear indicator |
Bolt Hole Circle Diameter | Discs: 108 mm |
Centering Diameter | Discs: 52 mm |
Height 1 | Pads: 44 mm |
Axle Stub Diameter | Discs: 30 mm |
Manufacturer | NISSAN RENAULT |
Model | KANGOO NV250 |
Rotor Style | Discs: Solid |
Important compatibility info
Placement on Vehicle | Rear Axle |
Height | Discs: 88 mm |
Width | Pads: 95 mm |
Outer diameter | Discs: 274 mm |
Thickness | Pads: 16 mm |
Additional Information 2 | Discs: with ABS sensor ring, with wheel bearing; Pads: with bolts |
Brake Disc Thickness | Discs: 11 mm |
Number of Holes | Discs: 5 |
Brake System | Pads: TRW |
Wear Warning Contact | Pads: not prepared for wear indicator |
Bolt Hole Circle Diameter | Discs: 108 mm |
Centering Diameter | Discs: 52 mm |
Height 1 | Pads: 44 mm |
Axle Stub Diameter | Discs: 30 mm |
Manufacturer | NISSAN RENAULT |
Model | KANGOO NV250 |
Rotor Style | Discs: Solid |
Important compatibility info
Additional Information | with central slave cylinder |
Diameter | 260 mm |
Type | Clutch Kit |
Function | Clutch Kit |
Important compatibility info
Additional Information | with central slave cylinder |
Diameter | 260 mm |
Type | Clutch Kit |
Function | Clutch Kit |
Important compatibility info
Alternator Charge Current | 105 A |
Voltage | 12 V |
Pulleys | without belt pulley |
Rotation Direction | Clockwise rotation |
Manufacturer Restriction | Marelli |
Function | Alternator |
Number of Ribs | 5 |
Type | Alternator |
Important compatibility info
Alternator Charge Current | 105 A |
Voltage | 12 V |
Pulleys | without belt pulley |
Rotation Direction | Clockwise rotation |
Manufacturer Restriction | Marelli |
Function | Alternator |
Number of Ribs | 5 |
Type | Alternator |
Important compatibility info
Shock Absorber Design | Spring-bearing Damper |
Function | Shock Absorber |
Compression Height | 339 mm |
Shock Absorber Mounting Type | Bottom eye, Top pin |
Shock Absorber Type | Gas Pressure |
Diameter | 50 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Shock Absorber System | Monotube |
Height | 460 mm |
Type | Shock Absorber |
Important compatibility info
Shock Absorber Design | Spring-bearing Damper |
Function | Shock Absorber |
Compression Height | 339 mm |
Shock Absorber Mounting Type | Bottom eye, Top pin |
Shock Absorber Type | Gas Pressure |
Diameter | 50 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Shock Absorber System | Monotube |
Height | 460 mm |
Type | Shock Absorber |
Important compatibility info
Function | Drive Shaft |
Placement on Vehicle | Front Axle Right |
Length | 795 mm |
External Teeth, Wheel Side | 36 |
Length 2 | 840 mm |
Type | Drive Shaft |
Important compatibility info
Function | Drive Shaft |
Placement on Vehicle | Front Axle Right |
Length | 795 mm |
External Teeth, Wheel Side | 36 |
Length 2 | 840 mm |
Type | Drive Shaft |
Important compatibility info
External Teeth, Wheel Side | 36 |
External Teeth, Diff.Side | 31 |
Type | Drive Shaft |
Function | Drive Shaft |
Placement on Vehicle | Front Axle Left |
Length | 510 mm |
Important compatibility info
External Teeth, Wheel Side | 36 |
External Teeth, Diff.Side | 31 |
Type | Drive Shaft |
Function | Drive Shaft |
Placement on Vehicle | Front Axle Left |
Length | 510 mm |
Important compatibility info
Function | Alternator |
Alternator Charge Current | 150 A |
Rotation Direction | Clockwise rotation |
Manufacturer Restriction | Bosch |
Type | Alternator |
Voltage | 12 V |
Pulleys | with freewheel belt pulley |
Important compatibility info
Function | Alternator |
Alternator Charge Current | 150 A |
Rotation Direction | Clockwise rotation |
Manufacturer Restriction | Bosch |
Type | Alternator |
Voltage | 12 V |
Pulleys | with freewheel belt pulley |
Important compatibility info
Voltage | 12 V |
Pulleys | with freewheel belt pulley |
Alternator Charge Current | 120 A |
Type | Alternator |
Manufacturer Restriction | Denso |
Function | Alternator |
Number of Ribs | 5 |
Important compatibility info
Voltage | 12 V |
Pulleys | with freewheel belt pulley |
Alternator Charge Current | 120 A |
Type | Alternator |
Manufacturer Restriction | Denso |
Function | Alternator |
Number of Ribs | 5 |
Important compatibility info
Function | Starter |
Rated Power | 2 kW |
Number of Teeth | 12 |
Voltage | 12 V |
Type | Starter |
Number of mounting bores | 3 |
Important compatibility info
Function | Starter |
Rated Power | 2 kW |
Number of Teeth | 12 |
Voltage | 12 V |
Type | Starter |
Number of mounting bores | 3 |
Important compatibility info
Number of mounting bores | 2 |
Type | Starter |
Manufacturer Restriction | Valeo |
Function | Starter |
Voltage | 12 V |
Rotation Direction | Clockwise rotation |
Number of Teeth | 10 |
Number of Thread Bores | 2 |
Rated Power | 2.2 kW |
Important compatibility info
Number of mounting bores | 2 |
Type | Starter |
Manufacturer Restriction | Valeo |
Function | Starter |
Voltage | 12 V |
Rotation Direction | Clockwise rotation |
Number of Teeth | 10 |
Number of Thread Bores | 2 |
Rated Power | 2.2 kW |
Important compatibility info
Number of Thread Bores | 1 |
Rated Power | 1.4 kW |
Voltage | 12 V |
Number of Teeth | 10 |
Number of mounting bores | 2 |
Type | Starter |
Function | Starter |
Important compatibility info
Number of Thread Bores | 1 |
Rated Power | 1.4 kW |
Voltage | 12 V |
Number of Teeth | 10 |
Number of mounting bores | 2 |
Type | Starter |
Function | Starter |
Important compatibility info
Function | Drive Shaft |
External Teeth, Wheel Side | 27 |
Number of Teeth | 46 |
Type | Drive Shaft |
ABS Ring Diameter | 82 mm |
External Teeth, Diff.Side | 27 |
Length | 960 mm |
Placement on Vehicle | Front Axle Right |
Important compatibility info
Function | Drive Shaft |
External Teeth, Wheel Side | 27 |
Number of Teeth | 46 |
Type | Drive Shaft |
ABS Ring Diameter | 82 mm |
External Teeth, Diff.Side | 27 |
Length | 960 mm |
Placement on Vehicle | Front Axle Right |
Important compatibility info
Placement on Vehicle | Front Axle |
Additional Information 2 | with integrated ABS sensor |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Extra Description | PROformer |
Important compatibility info
Placement on Vehicle | Front Axle |
Additional Information 2 | with integrated ABS sensor |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Extra Description | PROformer |
Important compatibility info
Placement on Vehicle | Front Axle |
Height | Discs: 52 mm |
Width | Pads: 181 mm |
Additional Information | Pads: with retaining spring |
Outer diameter | Discs: 324 mm |
Thickness | Pads: 18 mm |
Brake Disc Thickness | Discs: 28 mm |
Number of Holes | Discs: 5 |
Brake System | Pads: ATE |
Wear Warning Contact | Pads: prepared for wear indicator |
Bolt Hole Circle Diameter | Discs: 108 mm |
Centering Diameter | Discs: 64 mm |
Height 1 | Pads: 72 mm |
Machining | Discs: High-carbon |
Manufacturer | VOLVO |
Model | XC60 |
Rotor Style | Discs: Vented |
Important compatibility info
Placement on Vehicle | Front Axle |
Height | Discs: 52 mm |
Width | Pads: 181 mm |
Additional Information | Pads: with retaining spring |
Outer diameter | Discs: 324 mm |
Thickness | Pads: 18 mm |
Brake Disc Thickness | Discs: 28 mm |
Number of Holes | Discs: 5 |
Brake System | Pads: ATE |
Wear Warning Contact | Pads: prepared for wear indicator |
Bolt Hole Circle Diameter | Discs: 108 mm |
Centering Diameter | Discs: 64 mm |
Height 1 | Pads: 72 mm |
Machining | Discs: High-carbon |
Manufacturer | VOLVO |
Model | XC60 |
Rotor Style | Discs: Vented |
Important compatibility info
Type | Charging Cable, electric vehicle |
Charger Cable Length | 5 m |
Function | Charging Cable, electric vehicle |
Plug Type | Charging plug type 2 |
Rated Power | 7.4 kW |
Voltage | 240 V |
Title | EV Extension Cable - 32A 1 PHASE T2 FEMALE-T2 MALE 5M |
Additional Information
- Storage Bag
- copper alloy contact
- PBT handle
- operating temperature -30 to 50 degrees C
- tested to 2500 VDC
- safe and reliable
- Long lasting
- CE,UKCA, IEC TUV Certified. IP55 Rated
Important compatibility info
Type | Charging Cable, electric vehicle |
Charger Cable Length | 5 m |
Function | Charging Cable, electric vehicle |
Plug Type | Charging plug type 2 |
Rated Power | 7.4 kW |
Voltage | 240 V |
Title | EV Extension Cable - 32A 1 PHASE T2 FEMALE-T2 MALE 5M |
Additional Information
- Storage Bag
- copper alloy contact
- PBT handle
- operating temperature -30 to 50 degrees C
- tested to 2500 VDC
- safe and reliable
- Long lasting
- CE,UKCA, IEC TUV Certified. IP55 Rated






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023