Proud to be a UK-based company
Contact usCar Parts & Accessories by Blue Print
Blue Print is a brand of high quality parts for use in the servicing and repair of cars and vans.
Blue Print parts are a great value alternative to expensive replacement parts from the vehicle manufacturer’s dealership. They are designed and specified to be an exact replacement for the original part that is removed from the car and to perform to high standards when fitted. Categories
Important compatibility info
| Weight | 1.380 kg |
| Function | Water Pump, engine cooling |
| Seal Material | Paper |
| Water pump impeller material | Metal |
| Number of Wings | 6 |
| Material | Cast Aluminium |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| for OE number | MD979171 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.82
Important compatibility info
| Weight | 0.431 kg |
| Function | Tensioner Pulley, timing belt |
| Replaces | ADH27622 |
| Outer diameter | 55 mm |
| Width | 42 mm |
| Width of castor bearing surface | 24 mm |
| Type | Tensioner Pulley, timing belt |
| Additional Information | with spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.82
Important compatibility info
| Weight | 0.431 kg |
| Function | Tensioner Pulley, timing belt |
| Replaces | ADH27622 |
| Outer diameter | 55 mm |
| Width | 42 mm |
| Width of castor bearing surface | 24 mm |
| Type | Tensioner Pulley, timing belt |
| Additional Information | with spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.82
Important compatibility info
| Weight | 0.4 kg |
| Height | 112 mm |
| Placement on Vehicle | in fuel tank |
| Outer diameter | 139 mm |
| Function | Fuel filter |
| Type | Fuel filter |
| Filter type | Filter Insert |
| for OE number | 15310-81A02 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.82
Important compatibility info
| Weight | 0.4 kg |
| Height | 112 mm |
| Placement on Vehicle | in fuel tank |
| Outer diameter | 139 mm |
| Function | Fuel filter |
| Type | Fuel filter |
| Filter type | Filter Insert |
| for OE number | 15310-81A02 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.82
Important compatibility info
| Weight | 0.45 kg |
| Width | 35 mm |
| Number of Teeth | 239 |
| Belts | with rounded tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.82
Important compatibility info
| Weight | 0.45 kg |
| Width | 35 mm |
| Number of Teeth | 239 |
| Belts | with rounded tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.82
Important compatibility info
| Material | Aluminium |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Weight | 1.109 kg |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.82
Important compatibility info
| Material | Aluminium |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Weight | 1.109 kg |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.82
Important compatibility info
| Additional Information | with synthetic grease |
| Weight | 4.760 kg |
| Outer diameter | 229 mm |
| Additional Information 2 | with clutch release bearing |
| Number of Teeth | 20 |
| Multi-piece | Three-piece |
| Type | Clutch Kit |
| Function | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.84
Important compatibility info
| Additional Information | with synthetic grease |
| Weight | 4.760 kg |
| Outer diameter | 229 mm |
| Additional Information 2 | with clutch release bearing |
| Number of Teeth | 20 |
| Multi-piece | Three-piece |
| Type | Clutch Kit |
| Function | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.84
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 347 mm |
| Thickness | 60 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Weight | 11.10 kg |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.84
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 347 mm |
| Thickness | 60 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Weight | 11.10 kg |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.84
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Weight | 10.5 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 330 mm |
| Thickness | 66 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 22.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.87
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Weight | 10.5 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 330 mm |
| Thickness | 66 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 22.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.87
Important compatibility info
| Weight | 3.980 kg |
| Steering arm type | Control Arm |
| Paired article numbers | ADC48696 |
| Placement on Vehicle | Front Axle Right, Upper |
| Additional Information | with lock nut |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.87
Important compatibility info
| Weight | 3.980 kg |
| Steering arm type | Control Arm |
| Paired article numbers | ADC48696 |
| Placement on Vehicle | Front Axle Right, Upper |
| Additional Information | with lock nut |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.87
Important compatibility info
| Weight | 3.120 kg |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
| Width | 104 mm |
| Outer diameter | 70 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Inner diameter | 57 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.87
Important compatibility info
| Weight | 3.120 kg |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
| Width | 104 mm |
| Outer diameter | 70 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Inner diameter | 57 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.87
Important compatibility info
| Function | Clutch Kit |
| Number of Teeth | 28 |
| Outer diameter | 229 mm |
| Weight | 4.390 kg |
| Additional Information 2 | with clutch release bearing |
| Multi-piece | Three-piece |
| Additional Information | with synthetic grease |
| Extra Description | SMARTFIT Solution Kit |
| Type | Clutch Kit |
| Clutch | Replacement for self-adjusting clutch pressure plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.91
Important compatibility info
| Function | Clutch Kit |
| Number of Teeth | 28 |
| Outer diameter | 229 mm |
| Weight | 4.390 kg |
| Additional Information 2 | with clutch release bearing |
| Multi-piece | Three-piece |
| Additional Information | with synthetic grease |
| Extra Description | SMARTFIT Solution Kit |
| Type | Clutch Kit |
| Clutch | Replacement for self-adjusting clutch pressure plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.91
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 325 mm |
| Thickness | 48 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 114 mm |
| Centering Diameter | 69 mm |
| Surface | Coated |
| Weight | 9.7 kg |
| Number of mounting bores | 2 |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | internally vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.92
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 325 mm |
| Thickness | 48 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 114 mm |
| Centering Diameter | 69 mm |
| Surface | Coated |
| Weight | 9.7 kg |
| Number of mounting bores | 2 |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | internally vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.92
Important compatibility info
| Outer diameter | 190 mm |
| Weight | 4.450 kg |
| Number of Teeth | 20 |
| Additional Information | with synthetic grease |
| Multi-piece | Three-piece |
| Additional Information 2 | with clutch release bearing |
| Replaces | ADD63044 |
| Function | Clutch Kit |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Pressure Plate (ADD63227N)
- 1x Blue Print Clutch Disc (ADD63128)
- 1x Blue Print Clutch Release Bearing (ADD63309)
£91.93
Important compatibility info
| Outer diameter | 190 mm |
| Weight | 4.450 kg |
| Number of Teeth | 20 |
| Additional Information | with synthetic grease |
| Multi-piece | Three-piece |
| Additional Information 2 | with clutch release bearing |
| Replaces | ADD63044 |
| Function | Clutch Kit |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Pressure Plate (ADD63227N)
- 1x Blue Print Clutch Disc (ADD63128)
- 1x Blue Print Clutch Release Bearing (ADD63309)
£91.93
Important compatibility info
| Additional Information | with synthetic grease |
| Outer diameter | 216 mm |
| Additional Information 2 | with clutch release bearing |
| Number of Teeth | 28 |
| Multi-piece | Three-piece |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Weight | 5.068 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Pressure Plate (ADV183234N)
- 1x Blue Print Clutch Disc (ADV183141)
£91.95
Important compatibility info
| Additional Information | with synthetic grease |
| Outer diameter | 216 mm |
| Additional Information 2 | with clutch release bearing |
| Number of Teeth | 28 |
| Multi-piece | Three-piece |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Weight | 5.068 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Pressure Plate (ADV183234N)
- 1x Blue Print Clutch Disc (ADV183141)
£91.95
Important compatibility info
| Weight | 9.04 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 320 mm |
| Thickness | 43 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28.4 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 71 mm |
| Function | Brake Disc |
| Surface | Coated |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.98
Important compatibility info
| Weight | 9.04 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 320 mm |
| Thickness | 43 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28.4 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 71 mm |
| Function | Brake Disc |
| Surface | Coated |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.98
Important compatibility info
| Weight | 7.92 kg |
| Outer diameter | 305 mm |
| Thickness | 45 mm |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Rim Hole Number | 4 -Hole |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 98 mm |
| Number of mounting bores | 4 |
| Function | Brake Disc |
| Surface | Coated |
| Centering Diameter | 59 mm |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.01
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023