Proud to be a UK-based company
Contact usCar Parts & Accessories by Blue Print
Blue Print is a brand of high quality parts for use in the servicing and repair of cars and vans.
Blue Print parts are a great value alternative to expensive replacement parts from the vehicle manufacturer’s dealership. They are designed and specified to be an exact replacement for the original part that is removed from the car and to perform to high standards when fitted. Categories
Important compatibility info
| Weight | 3.2 kg |
| Placement on Vehicle | Front |
| Type | Exhaust Pipe |
| Function | Exhaust Pipe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.37
Important compatibility info
| Weight | 3.2 kg |
| Placement on Vehicle | Front |
| Type | Exhaust Pipe |
| Function | Exhaust Pipe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.37
Important compatibility info
| Weight | 4.298 kg |
| Additional Information 2 | with clutch release bearing |
| Multi-piece | Three-piece |
| Additional Information | with synthetic grease |
| Function | Clutch Kit |
| Number of Teeth | 24 |
| Outer diameter | 202 mm |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.38
Important compatibility info
| Weight | 4.298 kg |
| Additional Information 2 | with clutch release bearing |
| Multi-piece | Three-piece |
| Additional Information | with synthetic grease |
| Function | Clutch Kit |
| Number of Teeth | 24 |
| Outer diameter | 202 mm |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.38
Important compatibility info
| Weight | 9.46 kg |
| Rotor Style | perforated/vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 330 mm |
| Thickness | 56 mm |
| Brake Disc Thickness | 26 mm |
| Minimum thickness | 24 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.39
Important compatibility info
| Weight | 9.46 kg |
| Rotor Style | perforated/vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 330 mm |
| Thickness | 56 mm |
| Brake Disc Thickness | 26 mm |
| Minimum thickness | 24 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.39
Important compatibility info
| Function | Clutch Pressure Plate |
| Type | Clutch Pressure Plate |
| Weight | 4.540 kg |
| Outer diameter | 227 mm |
| Replaces | ADC43206N; ADC43211N |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.40
Important compatibility info
| Function | Clutch Pressure Plate |
| Type | Clutch Pressure Plate |
| Weight | 4.540 kg |
| Outer diameter | 227 mm |
| Replaces | ADC43206N; ADC43211N |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.40
Important compatibility info
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Number of mounting bores | 3 |
| Surface | Coated |
| Centering Diameter | 71 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Minimum thickness | 28 mm |
| Brake Disc Thickness | 30 mm |
| Thickness | 48 mm |
| Outer diameter | 340 mm |
| Placement on Vehicle | Front Axle |
| Rotor Style | Internally Vented |
| Weight | 10.64 kg |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.45
Important compatibility info
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Number of mounting bores | 3 |
| Surface | Coated |
| Centering Diameter | 71 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Minimum thickness | 28 mm |
| Brake Disc Thickness | 30 mm |
| Thickness | 48 mm |
| Outer diameter | 340 mm |
| Placement on Vehicle | Front Axle |
| Rotor Style | Internally Vented |
| Weight | 10.64 kg |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.45
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 1.56 kg |
| Type | Repair Kit, kingpin |
| Function | Repair Kit, kingpin |
£95.47
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 1.56 kg |
| Type | Repair Kit, kingpin |
| Function | Repair Kit, kingpin |
£95.47
Important compatibility info
| Weight | 6.200 kg |
| Multi-piece | Three-piece |
| Additional Information 2 | with clutch release bearing |
| Number of Teeth | 22 |
| Outer diameter | 226 mm |
| Function | Clutch Kit |
| Additional Information | with synthetic grease |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Release Bearing (ADM53316)
£95.52
Important compatibility info
| Weight | 6.200 kg |
| Multi-piece | Three-piece |
| Additional Information 2 | with clutch release bearing |
| Number of Teeth | 22 |
| Outer diameter | 226 mm |
| Function | Clutch Kit |
| Additional Information | with synthetic grease |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Release Bearing (ADM53316)
£95.52
Important compatibility info
| Number of Teeth | 178 |
| Weight | 1.630 kg |
| Width | 25 mm |
| Belts | with rounded tooth profile |
| Surface | Coated |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
| Additional Information | without water pump |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Units / Pulleys | incl. hydraulic belt tensioner |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Timing Belt (ADT37539)
- 1x Blue Print Tensioner Pulley, timing belt (ADT37639)
- 1x Blue Print Deflection Pulley/Guide Pulley, timing belt (ADT37648)
- 1x Blue Print Tensioner, timing belt (ADT37659)
£95.52
Important compatibility info
| Number of Teeth | 178 |
| Weight | 1.630 kg |
| Width | 25 mm |
| Belts | with rounded tooth profile |
| Surface | Coated |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
| Additional Information | without water pump |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Units / Pulleys | incl. hydraulic belt tensioner |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Timing Belt (ADT37539)
- 1x Blue Print Tensioner Pulley, timing belt (ADT37639)
- 1x Blue Print Deflection Pulley/Guide Pulley, timing belt (ADT37648)
- 1x Blue Print Tensioner, timing belt (ADT37659)
£95.52
Important compatibility info
| Length | 96 mm |
| Material | Plastic |
| Outer diameter | 80 mm |
| Inner diameter | 73 mm |
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Weight | 0.18 kg |
| Additional Information 2 | Control Unit/Software must be trained/updated |
| Type | Mass Air Flow Sensor |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.55
Important compatibility info
| Length | 96 mm |
| Material | Plastic |
| Outer diameter | 80 mm |
| Inner diameter | 73 mm |
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Weight | 0.18 kg |
| Additional Information 2 | Control Unit/Software must be trained/updated |
| Type | Mass Air Flow Sensor |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.55
Important compatibility info
| Type | Housing, oil filter |
| Function | Housing, oil filter |
| Height | 189 mm |
| Width | 147 mm |
| Length | 318 mm |
| Weight | 1.65 kg |
| Additional Information | with gasket/seal, with oil filter, with oil cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.59
Important compatibility info
| Weight | 8.0 kg |
| Width | 55 mm |
| Placement on Vehicle | Rear Axle |
| Max.skimmed drum measure | 255.5 mm |
| Bolt Hole Circle Diameter | 114 mm |
| Thickness | 85 mm |
| Function | Brake Drum |
| Centering Diameter | 72 mm |
| Inner diameter | 254 mm |
| Outer diameter | 301 mm |
| Rim Hole Number | 5 -Hole |
| Type | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.65
Important compatibility info
| Weight | 8.0 kg |
| Width | 55 mm |
| Placement on Vehicle | Rear Axle |
| Max.skimmed drum measure | 255.5 mm |
| Bolt Hole Circle Diameter | 114 mm |
| Thickness | 85 mm |
| Function | Brake Drum |
| Centering Diameter | 72 mm |
| Inner diameter | 254 mm |
| Outer diameter | 301 mm |
| Rim Hole Number | 5 -Hole |
| Type | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.65
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Weight | 10.64 kg |
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Surface | Coated |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Minimum thickness | 28 mm |
| Thickness | 58 mm |
| Brake Disc Thickness | 32 mm |
| Outer diameter | 330 mm |
| Placement on Vehicle | Front Axle |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.66
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Weight | 10.64 kg |
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Surface | Coated |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Minimum thickness | 28 mm |
| Thickness | 58 mm |
| Brake Disc Thickness | 32 mm |
| Outer diameter | 330 mm |
| Placement on Vehicle | Front Axle |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.66
Important compatibility info
| Outer diameter | 225 mm |
| Number of Teeth | 22 |
| Multi-piece | Three-piece |
| Additional Information 2 | with clutch release bearing |
| Function | Clutch Kit |
| Replaces | ADM53066 |
| Type | Clutch Kit |
| Additional Information | with synthetic grease |
| Weight | 6.350 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Disc (ADM53108)
- 1x Blue Print Clutch Pressure Plate (ADM53229N)
- 1x Blue Print Clutch Release Bearing (ADM53313)
£95.67
Important compatibility info
| Outer diameter | 225 mm |
| Number of Teeth | 22 |
| Multi-piece | Three-piece |
| Additional Information 2 | with clutch release bearing |
| Function | Clutch Kit |
| Replaces | ADM53066 |
| Type | Clutch Kit |
| Additional Information | with synthetic grease |
| Weight | 6.350 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Disc (ADM53108)
- 1x Blue Print Clutch Pressure Plate (ADM53229N)
- 1x Blue Print Clutch Release Bearing (ADM53313)
£95.67
Important compatibility info
| Weight | 5.842 kg |
| Number of Teeth | 20 |
| Multi-piece | Two-piece |
| Type | Clutch Kit |
| Additional Information | with synthetic grease |
| Outer diameter | 237 mm |
| Function | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Pressure Plate (ADBP320007)
- 1x Blue Print Clutch Disc (ADBP310009)
£95.70
Important compatibility info
| Weight | 5.842 kg |
| Number of Teeth | 20 |
| Multi-piece | Two-piece |
| Type | Clutch Kit |
| Additional Information | with synthetic grease |
| Outer diameter | 237 mm |
| Function | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Pressure Plate (ADBP320007)
- 1x Blue Print Clutch Disc (ADBP310009)
£95.70
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 320 mm |
| Thickness | 46 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 140 mm |
| Centering Diameter | 94 mm |
| Surface | Coated |
| Weight | 9.3 kg |
| Rim Hole Number | 6 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | internally vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.70
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 320 mm |
| Thickness | 46 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 140 mm |
| Centering Diameter | 94 mm |
| Surface | Coated |
| Weight | 9.3 kg |
| Rim Hole Number | 6 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | internally vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.70
Important compatibility info
| Additional Information | with synthetic grease |
| for OE number | 71738464 S1 |
| Weight | 5.526 kg |
| Additional Information 2 | with clutch release bearing |
| Outer diameter | 228 mm |
| Number of Teeth | 20 |
| Multi-piece | Three-piece |
| Type | Clutch Kit |
| Function | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.71
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023