Car Parts & Accessories by Apec
Categories
Important compatibility info
Material | Aluminium |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Manufacturer | AUDI SEAT VOLKSWAGEN |
Model | ALHAMBRA CC PASSAT Q3 SHARAN |
Placement on Vehicle | Lower, Front Axle Right |
Paired article numbers | AST2325 |
Important compatibility info
Placement on Vehicle | Rear Axle |
Additional Information 2 | with integrated ABS sensor |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Width | 57 mm |
Inner diameter | 36 mm |
Important compatibility info
Placement on Vehicle | Rear Axle |
Additional Information 2 | with integrated ABS sensor |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Width | 57 mm |
Inner diameter | 36 mm |
Important compatibility info
Function | Drive Shaft |
Type | Drive Shaft |
External Teeth, Wheel Side | 38 |
Number of Teeth | 48 |
Manufacturer | VOLKSWAGEN |
Length | 538 mm |
Model | CARAVELLE TRANSPORTER |
Placement on Vehicle | Front Axle |
Important compatibility info
Function | Drive Shaft |
Type | Drive Shaft |
External Teeth, Wheel Side | 38 |
Number of Teeth | 48 |
Manufacturer | VOLKSWAGEN |
Length | 538 mm |
Model | CARAVELLE TRANSPORTER |
Placement on Vehicle | Front Axle |
Important compatibility info
Voltage | 12 V |
Number of Teeth | 12 |
Rated Power | 1.4 kW |
Type | Starter |
Manufacturer Restriction | Mitsubishi |
Function | Starter |
Important compatibility info
Voltage | 12 V |
Number of Teeth | 12 |
Rated Power | 1.4 kW |
Type | Starter |
Manufacturer Restriction | Mitsubishi |
Function | Starter |
Important compatibility info
Thread Size | M16 |
Function | Alternator Freewheel Clutch |
Number of grooves | 5 |
Distance to first groove | 7 mm |
Type | Alternator Freewheel Clutch |
Important compatibility info
Thread Size | M16 |
Function | Alternator Freewheel Clutch |
Number of grooves | 5 |
Distance to first groove | 7 mm |
Type | Alternator Freewheel Clutch |
Important compatibility info
Suspension | for vehicles with comfort suspension |
Vehicle Equipment | for vehicles with level control |
Type | Air Spring, suspension |
Placement on Vehicle | Rear Axle Left |
Shock Absorber Mounting Type | Bottom Pin, Top yoke |
Function | Air Spring, suspension |
Important compatibility info
Suspension | for vehicles with comfort suspension |
Vehicle Equipment | for vehicles with level control |
Type | Air Spring, suspension |
Placement on Vehicle | Rear Axle Left |
Shock Absorber Mounting Type | Bottom Pin, Top yoke |
Function | Air Spring, suspension |
Important compatibility info
Placement on Vehicle | Rear Axle Right |
Function | Air Spring, suspension |
Shock Absorber Mounting Type | Bottom Pin, Top yoke |
Vehicle Equipment | for vehicles with level control |
Suspension | for vehicles with comfort suspension |
Type | Air Spring, suspension |
Important compatibility info
Placement on Vehicle | Rear Axle Right |
Function | Air Spring, suspension |
Shock Absorber Mounting Type | Bottom Pin, Top yoke |
Vehicle Equipment | for vehicles with level control |
Suspension | for vehicles with comfort suspension |
Type | Air Spring, suspension |
Important compatibility info
Height | 47 mm |
Outer diameter | 280 mm |
Brake Disc Thickness | 26 mm |
Rotor Style | Vented |
Placement on Vehicle | Front Axle |
Number of Holes | 5 |
Function | Brake Disc |
Bolt Hole Circle Diameter | 114 mm |
Manufacturer | HYUNDAI KIA |
Type | Brake Disc Rotor |
Centering Diameter | 69 mm |
Model | CARENS COUPE ix20 PRO CEED SPORTAGE TUCSON |
Inspection Tag | 90R-02C0301/0267 |
Important compatibility info
Height | 47 mm |
Outer diameter | 280 mm |
Brake Disc Thickness | 26 mm |
Rotor Style | Vented |
Placement on Vehicle | Front Axle |
Number of Holes | 5 |
Function | Brake Disc |
Bolt Hole Circle Diameter | 114 mm |
Manufacturer | HYUNDAI KIA |
Type | Brake Disc Rotor |
Centering Diameter | 69 mm |
Model | CARENS COUPE ix20 PRO CEED SPORTAGE TUCSON |
Inspection Tag | 90R-02C0301/0267 |
Important compatibility info
Shock Absorber Mounting Type | Bottom Pin, Top yoke |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Suspension | for vehicles with AMG suspension |
Braking / Drive Dynamics | for vehicles with Airmatic DC |
Type | Air Spring, suspension |
Function | Air Spring, suspension |
Manufacturer | MERCEDES |
Important compatibility info
Shock Absorber Mounting Type | Bottom Pin, Top yoke |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Suspension | for vehicles with AMG suspension |
Braking / Drive Dynamics | for vehicles with Airmatic DC |
Type | Air Spring, suspension |
Function | Air Spring, suspension |
Manufacturer | MERCEDES |
Important compatibility info
Function | Shock Absorber |
Shock Absorber Mounting Type | Top pin |
Shock Absorber Design | Suspension Strut |
Shock Absorber Type | Oil Pressure |
Compression Height | 353 mm |
Placement on Vehicle | Front Axle |
Diameter | 50 mm |
Type | Shock Absorber |
Height | 522 mm |
Manufacturer | AUDI SEAT SKODA VOLKSWAGEN |
Model | A3 BORA GOLF LEON OCTAVIA TOLEDO |
Important compatibility info
Function | Shock Absorber |
Shock Absorber Mounting Type | Top pin |
Shock Absorber Design | Suspension Strut |
Shock Absorber Type | Oil Pressure |
Compression Height | 353 mm |
Placement on Vehicle | Front Axle |
Diameter | 50 mm |
Type | Shock Absorber |
Height | 522 mm |
Manufacturer | AUDI SEAT SKODA VOLKSWAGEN |
Model | A3 BORA GOLF LEON OCTAVIA TOLEDO |
Important compatibility info
Shock Absorber System | Twin-Tube |
Model | MONDEO |
Diameter | 52 mm |
Placement on Vehicle | Front Axle |
Shock Absorber Mounting Type | Top pin |
Compression Height | 305 mm |
Shock Absorber Type | Gas Pressure |
Type | Shock Absorber |
Shock Absorber Design | Suspension Strut, Damper with Rebound Spring |
Manufacturer | FORD |
Function | Shock Absorber |
Height | 434 mm |
Important compatibility info
Shock Absorber System | Twin-Tube |
Model | MONDEO |
Diameter | 52 mm |
Placement on Vehicle | Front Axle |
Shock Absorber Mounting Type | Top pin |
Compression Height | 305 mm |
Shock Absorber Type | Gas Pressure |
Type | Shock Absorber |
Shock Absorber Design | Suspension Strut, Damper with Rebound Spring |
Manufacturer | FORD |
Function | Shock Absorber |
Height | 434 mm |
Important compatibility info
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Outer diameter 1 | 130 mm |
Width 1 | 110 mm |
Manufacturer | CITROEN DS PEUGEOT |
Additional Information 2 | with integrated magnetic sensor ring |
Placement on Vehicle | Rear Axle |
Replaces | AWB1479 |
Important compatibility info
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Outer diameter 1 | 130 mm |
Width 1 | 110 mm |
Manufacturer | CITROEN DS PEUGEOT |
Additional Information 2 | with integrated magnetic sensor ring |
Placement on Vehicle | Rear Axle |
Replaces | AWB1479 |
Important compatibility info
Outer diameter 1 | 150 mm |
Width 1 | 54 mm |
Outer diameter 2 | 92 mm |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Important compatibility info
Outer diameter 1 | 150 mm |
Width 1 | 54 mm |
Outer diameter 2 | 92 mm |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Important compatibility info
Function | Starter |
Rated Power | 1 kW |
Number of Teeth | 10 |
Rotation Direction | Anticlockwise rotation |
Voltage | 12 V |
Type | Starter |
Number of mounting bores | 2 |
Manufacturer Restriction | Bosch |
Manufacturer | AUDI SEAT SKODA VOLKSWAGEN |
Important compatibility info
Function | Starter |
Rated Power | 1 kW |
Number of Teeth | 10 |
Rotation Direction | Anticlockwise rotation |
Voltage | 12 V |
Type | Starter |
Number of mounting bores | 2 |
Manufacturer Restriction | Bosch |
Manufacturer | AUDI SEAT SKODA VOLKSWAGEN |
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Cone Size | 18.1 mm |
Thread Size | M16x1.5 |
Placement on Vehicle | Upper, Front Axle Right |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Model | DAILY |
Manufacturer | IVECO |
Paired article numbers | AST2215 |
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Cone Size | 18.1 mm |
Thread Size | M16x1.5 |
Placement on Vehicle | Upper, Front Axle Right |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Model | DAILY |
Manufacturer | IVECO |
Paired article numbers | AST2215 |
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Front Axle Right |
Brake Caliper Type | Brake Caliper (1 piston) |
Function | Brake Caliper |
for brake disc diameter | 276 mm |
Material | Grey Cast Iron |
Brake System | Mando |
Brake Disc Type | Vented |
Part number of recommended accessories | BBS6, BSC1 |
Piston diameter 1 | 57 mm |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023