Car Parts & Accessories by Laser

General Information

Engine Timing Tool Kit - Alfa Romeo/Fiat Multiair. Engine Timing Tool Kit - Alfa Romeo/Fiat Multiair

• Fiat Punto Evo/Punto/ Bravo 2009-2013 with engine codes 198A7.000/955A6.000, Lancia Delta 2010-2013 with engine code 955A7.000
• Applications: Alfa Romeo Mito/Giulietta Multiair105/Multiair Turbo135/163/170 from 2009-2013 with engine code/955A6.000/955A2.000/955A7.000/955A8.000/940A2.000
• Supplied in metal storage case with instructions and application list

General Information

Torque Multiplier Adaptor Kit - Ford. Torque Multiplier Adaptor Kit - Ford

General Information

EU Registered Design

• Use to tighten the crankshaft pulley bolt to the correct torque and angle
• Equivalent to the Ford OEM tools 303-1611-01 & 303-1611-02
• Engine codes include: 1.0lt EcoBoost M1JA, M1JE, M1JH, SFJA, SFJB, SFJC, SFJD, M1DA, M2DA, M1DD, M2DC, M1JC, M1JJ, P4JA, P4JB, P4JC, P4JD, XMJA, XMJB, XMJC, XMJD, YYJA, YYJB, M2DB, SFDB, M2GA, M2GB, M1CA, M1CB, SFCA, SFCB, SFCC, SFCD
• Application: Ford B-Max, C-Max, EcoSport, Fiesta, Focus, Grand C-Max, Grand Tourneo Connect, Mondeo, Tourneo Connect, Tourneo Courier, Transit Connect, Transit Courier from 2012 onwards

• Fifty two tools for removing most makes of Car Stereo systems including Blaupunkt, Grundig and Becker
• Applications include Ford | Volkswagen | Audi | BMW | Mercedes-Benz | Porsche | Opel/Vauxhall
• Essential tools for car stereo removal and installation
• Time saver
• Selected steel

General Information

Timing Tools - VAG 3cyl 6/12 valve. Timing Tools - VAG 3cyl 6/12 valve

• 6v/12v 12v tools are OEM T10123 x2 and T10121x1 with AZQ/BME Engine codes and 6v require T10120x1 and T1021x1 for AWY/BMD engine codes
• 2 and 3 cylinder
• Timing tools for Volkswagen Lupo and Polo 1.2 litre engines

General Information

Timing Tools - Land Rover/Jaguar V6. Timing Tools - Land Rover/Jaguar V6

• Camshaft sprocket timing pins 303-1126
• Camshaft Sprocket aligning tool 303-1132
• Flywheel Locking Tools - OEM 303-1117 (Automatic Transmission) 303-1116 (Manual Transmission)
• Engine Code 276D T 2004-2007
• Timing pins for Land Rover Discovery 2.7 TDV6, Range Rover Sport 2.7 TDV6 and Jaguar S Type TDVi with V6 engines with automatic and manual transmissions

General Information

Diesel Injector Seat Cutter Set

• 15mm flat cutter with 19mm external diameter for other makes
• 17mm angles cutter with 21mm external diameter for Fiat, Iveco
• 17mm flat cutter with 17mm external diameter for BMW, PSA, Renault
• The 17mm Flat cutter with 17mm external diameter for BMW/Peugeot/Renault19mm Angled cutter with 21mm external diameter for Fiat/ Iveco
• Set of 4 cutters for re-cutting injector seats when reconditioning diesel engines or replacing the injectors 15mm Flat cutter for universal applications

• Part of the Laser Truck range
• Black phosphate finish, heavy duty construction
• 65mm
• OEM 03.364.20.03.0
• For 6 to 9 tonne conventional and Eco axles (type H/K/N)

General Information

Timing Tool Kit - Fiat/Alfa Romeo/Saab/GM JTD. Timing Tool Kit - Fiat/Alfa Romeo/Saab/GM JTD

• 14 Buffing mops
• Supplied in metal case with EVA foam
• Essential tool
• Made in Sheffield
• Fits a wide range of models
• For use on Fiat | Alfa JTD multijet diesel engines 1.6 | 1.9 | 2.4 SOHC | DOHC

General Information

Timing Tool Kit - Fiat/Alfa Romeo/Saab/GM JTD. Timing Tool Kit - Fiat/Alfa Romeo/Saab/GM JTD

• 14 Buffing mops
• Supplied in metal case with EVA foam
• Essential tool
• Made in Sheffield
• Fits a wide range of models
• For use on Fiat | Alfa JTD multijet diesel engines 1.6 | 1.9 | 2.4 SOHC | DOHC

• Full instructions are included
• The tool works with an air compressor at 4-7 BAR and on a maximum diameter of 110mm
• This CV Bootgun is designed for stretching flexible CV Boots on to the drive shaft assemblies of automotive vehicles

General Information

For VAG 1.4/1.6/2.0 TDI CR engines from approx. 2012 onwards Includes tooling for timing the camshaft gears. Supplied in a metal case with foam inner. Made in UK

• Crankshaft Timing Tool and Locking Pin (C695) EU Registered Design
• Supplied in a metal case
• Includes tooling for timing the camshaft gears
• Offers 1.4/1.6/2.0 TDi CRD coverage from 2012 onwards
• Tools equivalent to OEM: T10265, T10264, T10492, T10409, T10064A, T10051
• Applications: Audi A3 III, A4, Seat Leon III, Volkswagen Golf VII and Skoda Octavia 2012-2016 with engine codes: 1.4 CUSA, CUSB, CUTA and 2.0 CKFC, CKFB, CRBC, CRBD, CRFA, CRFC, CRLB, CRLC, CRMB, CRVA, CRVC, CSUA, CSUB, CUNA, CUPA

General Information

Engine Timing Tool Kit - BMW.;,,**,/ Engine Timing Tool Kit - BMW;,..*,*.

• Made in Sheffield
• Essential tool kit
• Pump Pulley Removal Tool included. Manufactured from selected steel
• Applications include BMW 2.0 N47 | N47S (2007-2010)

General Information

Engine Timing Tool Kit - BMW.;,,**,/ Engine Timing Tool Kit - BMW;,..*,*.

• Made in Sheffield
• Essential tool kit
• Pump Pulley Removal Tool included. Manufactured from selected steel
• Applications include BMW 2.0 N47 | N47S (2007-2010)

General Information

Protective Arc Flash Face Shield - 1000V rated

• Protects against electric arcs caused by short circuits
• Protective face screen for use without helmet
• Polycarbonate screen with anti-mist treatment
• CE certificated with EN166/EN170, 1000v rated
• Adjustable headband for comfort

• Made in Sheffield
• A pulley holding tool (3661) may be required to change the chain
• The DW12 range is 2.2 (2001-)
• The twin cam systems has one camshaft driven by the cam belt and the other shaft driven by a chain in the head
• The DW10 engine range has a 2.0 capacity (1999-) and has SOHC and DOHC
• This kit sets the valve timing on the DW10 and DW12 Diesel Fiat and PSA ranges

• Made in Sheffield
• A pulley holding tool (3661) may be required to change the chain
• The DW12 range is 2.2 (2001-)
• The twin cam systems has one camshaft driven by the cam belt and the other shaft driven by a chain in the head
• The DW10 engine range has a 2.0 capacity (1999-) and has SOHC and DOHC
• This kit sets the valve timing on the DW10 and DW12 Diesel Fiat and PSA ranges

General Information

Pulley Holding Tool Set - VAG

• Complete set of adaptors including 4.8mm, 6mm, square 15mm x 6mm, square 15mm x 12mm, cup 13mm x 17mm , cup 16mm x 20mm, Spline M10, M12
• Equivalent to OEM tools T10172A (T10172) and T10554
• Designed to hold camshaft, crankshaft, oil pump and water pump pulleys and sprockets while loosening and tightening the fixing bolts

General Information

Cambelt Timing Tool Kit Ford 1.0GTDI Cambelt Timing Tool Kit Ford 1.0GTDI.

• Made in Sheffield
• Camshaft Locking blocks are EU Registered design
• Where the VCT pulleys require removing or setting the additional kit Part 6291 will be required

• Applications: Ford 1.0lt 3cyl Turbo charged EcoBoost engine from 2012<
• Equivalent to OEM 303-732, 303-1054, 303-1602, 303-1603, 303-1604, 303-1605/1, 303-1605/2
• GTDi engines found in Ford B-Max, C-Max, Fiesta, Focus, Grand C-Max, Transit Connect

General Information

Cambelt Timing Tool Kit Ford 1.0GTDI Cambelt Timing Tool Kit Ford 1.0GTDI.

• Made in Sheffield
• Camshaft Locking blocks are EU Registered design
• Where the VCT pulleys require removing or setting the additional kit Part 6291 will be required

• Applications: Ford 1.0lt 3cyl Turbo charged EcoBoost engine from 2012<
• Equivalent to OEM 303-732, 303-1054, 303-1602, 303-1603, 303-1604, 303-1605/1, 303-1605/2
• GTDi engines found in Ford B-Max, C-Max, Fiesta, Focus, Grand C-Max, Transit Connect

General Information

Rear Swinging Arm Bush Tool - for Ford

• Designed and manufactured in Sheffield
• Force Screw replacement Part No: Laser 1319, Nut Assembly replacement - Laser 1803
• Supplied with Molybdenum Disulphide grease for extended force screw life
• Designed to be used on car with the minimal strip down reducing the time taken to replace worn bushes (Bush Nos: 1 535 296/1 805 815)
• Application Ford Fiesta MK VI 2008 onwards

• Bush Nos: 1 535 296/1 805 815

General Information

Damaged Glow Plug Removal Set. Damaged Glow Plug Removal Set

• Packed in a blow case
• Removes 8mm and 10mm glow plugs
• For removing broken or damaged glow plugs

General Information

Engine Timing Kit - for PSA, Vauxhall/Opel 1.0, 1.2

• Designed for the latest generation Citroen/Peugeot EBO and EB2 1.0L and 1.2L 3 cylinder engines
• Applications: Citroen C3111/DS3/DS3 Cabrio/C-Elysee and Peugeot 2008/208/308
• Designed to hold the camshafts and crankshaft in their timed position during belt replacement
• Made in Sheffield
• Packed in EVA foam in a metal box

General Information

Engine Timing Tool Kit - VAG TFSI/FSI Engine Timing Tool Kit - VAG TFSI/FSI.

• Made in Sheffield
• OEM Cross reference and instructions provided
• Upgraded version of existing kit 5021
• Also 1.4 TSi and 1.2TFSi/FSi engines
• Applications: 1.4/1.6FSi

General Information

Engine Timing Tool Kit - VAG TFSI/FSI Engine Timing Tool Kit - VAG TFSI/FSI.

• Made in Sheffield
• OEM Cross reference and instructions provided
• Upgraded version of existing kit 5021
• Also 1.4 TSi and 1.2TFSi/FSi engines
• Applications: 1.4/1.6FSi

General Information

Engine Timing Tool Set - Vauxhall/Opel Engine Timing Tool Set - Vauxhall/Opel.

• LUH/A14NEL, LUJ/A14NET, LUJ/A14NEL, L2Q/A12XEL, LDC/A12XER, LWD/A12XEL, LDD/A14XEL, LDD/A14XER
• LUJ/A14NET, LDD/A14XER, LUJ/A14NET, LUH/A14NEL, LUJ/A14NET, LUJ/A14NEL, L2Q/A12XEL, LDC/A12XER, LWD/A12XEL, LDD/A14XEL, LDD/A14XER
• Made in Sheffield
• Engines 1.0/1.2/1.4 - Packed in a foam tray in a metal box
• Application: Adam, Ampera, Astra-J, Aveo, Corsa-D, Insignia, Meriva-B, Mokka, Zafira-C Tourer
• Engine Codes LWD, L2Z, LDD, LUU/A14XFL, LDD/A14XER, LDD/A14XEL, LUJ/114NET, LUJ/A14NEL, A10XEP, A12XEL, A12XER, A14XEL, A14XER, A14NEL, LUJ/A14NET, LDD/A14XER, LUJ/A14NET

General Information

Timing Tool Kit - fits Renault 1.6/2.0/2.3 DCI/ Nissan Timing Tool Kit - fits Renault 1.6/2.0/2.3 DCI/ Nissan.

• OEM Codes: EN48334, EN48332, EN48331, EN48330 Made in Sheffield
• Supplied in metal storage case
• Two crankshaft locking pins are now included to cover for the 16 DCi (Comp G) and 20, 23 DCi (Comp F) Component G - Crankshaft Locking Pin has been added for later M9T 20 and R9M 16 DCi engines
• Timing tool kit for Renault 20DCI chain drive diesel engines fitted to the Megane/ Vel Satis/Espace/Scenic/Trafic/Laguna/Koleos also fitted to the Nissan Qashqai and the Vauxhall/Opel Vivaro Packed in a metal case for storage Application list and OEM

General Information

Timing Tool Kit - fits Renault 1.6/2.0/2.3 DCI/ Nissan Timing Tool Kit - fits Renault 1.6/2.0/2.3 DCI/ Nissan.

• OEM Codes: EN48334, EN48332, EN48331, EN48330 Made in Sheffield
• Supplied in metal storage case
• Two crankshaft locking pins are now included to cover for the 16 DCi (Comp G) and 20, 23 DCi (Comp F) Component G - Crankshaft Locking Pin has been added for later M9T 20 and R9M 16 DCi engines
• Timing tool kit for Renault 20DCI chain drive diesel engines fitted to the Megane/ Vel Satis/Espace/Scenic/Trafic/Laguna/Koleos also fitted to the Nissan Qashqai and the Vauxhall/Opel Vivaro Packed in a metal case for storage Application list and OEM

General Information

Engine Timing Kit Ford 2.0 EcoBlue Diesel. Engine Timing Kit Ford 2.0 EcoBlue Diesel

General Information

Engine Timing Kit Ford 2.0 EcoBlue Diesel. Engine Timing Kit Ford 2.0 EcoBlue Diesel

General Information

Tap and Die Set - Metric 51pc Tap and Die Set - Metric 51pc.

• Manufactured from Alloy Steel and with split dies, this set is aimed at the professional user
• Sliding T-bar tap wrench