Car Parts & Accessories by Laser
Categories
Important compatibility info
Title | Compression Tester Adaptor |
Material | Steel |
Thread Size | M12 |
Colour | dark grey |
Length 1 | 200 mm |
Type | Compressed Air Adapter, spark plug/glow plug hole |
Function | Compressed Air Adapter, spark plug/glow plug hole |
Additional Information
General Information
Compression Test Adaptor Compression Test Adaptor.
- Also used on Peugeot 207/307 and Renault 12 16 valve
- BMW, Mini, Mercedes-Benz M156 (AMG engine manufactured from 2006 onwards
- This tool is now essential on BMW E90 335i with N54 engines (2006)
- This extra long Compression Test Adaptor is designed to fit 12mm Spark Plugs
Important compatibility info
Title | Laser Multi-purpose Oil Syringe - 200cc |
Material | PP (Polypropylene) |
Colour | clear/black |
Piston Chamber Volume | 200 cm³ |
Type | Oil Extraction Unit |
Hose Length | 185 mm |
Function | Oil Extraction Unit |
Additional Information
General Information
Multi-Purpose Oil Transfer Syringe 200cc
- Syringe hose length 185mm
- Suction and supply of gear oils etc.
- Made from composite plastic
- 200cc
- For the safe and easy removal of oil from gearboxes
Important compatibility info
Jaw Width | 45 mm |
Type | Safety Clamp |
Title | Insulated Safety Clamp - 1000V |
Length 1 | 140 mm |
Weight | 52 g |
Colour | red |
Function | Safety Clamp |
Material | PP (Polypropylene) |
Additional Information
General Information
Insulated Safety Clamp 1000v
- Dimensions: Length 140mm
- For use with insulated shrouding to hold the shroud in situ
- Jaw opening 45mm
- Rubber contacts in the jaw protect the insulating shroud
- Weight 52 grams
Important compatibility info
Title | Mini Brake Pipe Cutter - 4.75mm |
Additional Information
- Ratcheting, self adjusting mini brake pipe cutter ideal for restricted access
- 4.75mm (3/16in.) with ratchet handle
- Automatic self adjusting for faster cutting
- Extra leverage due to handle length over standard cutter. To further increase leverage use the ¼” drive square in the end of the handle
- Fast and accurate operation, ideal for under vehicle use
Important compatibility info
Title | Deep Impact Socket - 41mm - 1/2in. Drive |
Material | Chrome-Molybdenum Steel |
Spanner Size | 41 |
Shape/Form | Long |
Type | Socket Wrench Insert, ball joint nut |
Socket Driver | 1/2"D Inch |
Function | Socket Wrench Insert, ball joint nut |
Drive side (profile) | Hexagon |
Additional Information
- Deep impact socket
- Manufactured in Chrome Molybdenum for strength
- Suitable for use on Peugeot Ball Joint Sockets
Important compatibility info
Colour | Blue (2x) |
Adjustable | adjustable |
Type | Soldering Iron |
Function | Soldering Iron |
Additional Information
General Information
Butane Gas Torch Butane Gas Torch.
- Portable
- Suitable for heating and shrinking
- Adjustable heat control
- Piezo electric ignition
- Butane powered
Important compatibility info
Title | Measuring Jug - Clear White - 5 Litre |
Material | PE (Polyethylene) |
Colour | white-transparent |
Capacity | 10 l |
Type | Universal Container |
Function | Universal Container |
Tool handle type | Ergonomically Shaped Handle |
Additional Information
General Information
Measuring Jug - 5 Litre. Measuring Jug - 5 Litre
- Manufactured from Polyethylene
- Suitable for oil, water, Ad Blue, coolant, petrol, diesel etc.
- Measuring Jug with Quart and Litre measurements
Important compatibility info
Title | Timing Tool Kit (3096 Updated) - Ford |
Material | Steel |
Colour | black |
for OE number | OEM 303-376B |
Type | Mounting Tools, timing belt |
Function | Mounting Tools, timing belt |
Manufactured in | Great Britain |
Number of Parts | 4 -part |
Additional Information
Technical Information
Timing Tool Set - Ford/Volvo. Timing Tool Set - Ford/Volvo
- Camshaft Locking Strap now includes OEM 303-376B
- Made in Sheffield
- Also used on Volvo models with 18/20 CHAIN engines
- Also included in the kit is 303-748 (21-259) for Focus C-Max 16, 14, 16 and Fiesta Fusion 124 & 14
- This new camshaft setting bar updates the existing 3096 and is suitable for all the applications including the latest HWDA, HWDB & HXDA engines
Important compatibility info
Colour | red/black |
Adjustable | adjustable |
Type | Soldering Iron |
Function | Soldering Iron |
Hot Air Temperature | 1300 °C |
Additional Information
General Information
Butane Heating Torch. Butane Heating Torch
- Accepts standard self sealing threaded butane gas cartridges (not included)
- CE approved
- For heating and soldering. Ideal for use with Laser Part No 4707 Aluminium Repair System
- Piezo electric ignition
- Adjustable burner with maximum of 1300C
- A robust butane heating torch with a temperature of 1300C burner
Important compatibility info
Title | Bi-Hex Socket - 46mm x 100mm - 1/2in. Drive |
Material | Chrome-Molybdenum Steel |
Spanner Size | 46mm |
Shape/Form | Long |
Type | Socket Wrench Insert |
Socket Driver | 1/2"D Inch |
Socket Height | 100 mm |
Function | Socket Wrench Insert |
Drive side (profile) | Double Hexagon |
Additional Information
- Essential service tool
- Bi Hex in 1/2in. drive
- Correctly hardened and tempered
- Made from Chrome Molybdenum
- 46mm Bi-hex with 1/2in. drive. 100mm long
Important compatibility info
Type | Vehicle Front Cover |
Width | 500 mm |
Resistant to | Oil, Grease |
Washable up to | 30 °C |
Length 1 | 1200 mm |
Material | Nylon |
Title | Grill Protector - Grey |
Colour | grey |
Function | Vehicle Front Cover |
Additional Information
General Information
Grill Protector - Grey. Grill Protector - Grey
- Size: 120mmx50mm
- Protects body work against damage
- Grill protector grey with black edging non-slip grips to any material, complete with a laser logo
Important compatibility info
Adapter Shape | Cylindrical |
Title | Clutch Alignment Tool - Universal |
Function | Adjustment Gauge, clutch control |
Type | Adjustment Gauge, clutch control |
Number of adapters | 7 |
Additional Information
- Knurled grip
- Adaptor sizes: 15, 16, 17, 19, 20, 21, 25mm
- Includes cone adaptor for sizes over 25mm
- Aligns clutch disc when replacing the assembly
- Complete with 7 adaptors
Important compatibility info
Title | Socket With Locking Ring - Mercedes M-Cl |
Material | Steel |
Colour | black/grey |
for OE number | 164.330.09.35, A.164.330.09.35 |
Type | Mounting Tool Set, ball joint |
Function | Mounting Tool Set, ball joint |
Square Drive Tang Size | 20 (3/4") mm (inch) |
Additional Information
- Socket and installing ring for replacing the suspension joint on Mercedes M Class front and rear suspension
- 3/4in. drive
- Complete with installing ring
- Once the joint is fitted, the installing ring supplied with the socket is removed and the ring supplied with the joint, which has thread lock compound, is fitted to secure the joint permanently
Important compatibility info
Title | Socket - 65mm - 3/4in. Drive - 1993 Transit Van |
Material | Chrome Vanadium Steel |
Spanner Size | 65mm |
Shape/Form | Short |
Drive | 3/4"D Inch |
Type | Socket Wrench Insert |
Socket Driver | 3/4"D Inch |
Function | Socket Wrench Insert |
Drive side (profile) | Hexagon |
Additional Information
General Information
Socket 3/4"D - 65mm Socket 3/4"D - 65mm.
- Manufactured in Chrome Vanadium
- Introduced specifically for the hub nuts on Transit vans > 1988
Important compatibility info
Title | Assembly Lever - DSG Gearbox |
Material | Steel |
Colour | black/silver |
for OE number | OEM T10407 |
Type | Oil Filter Wrench, direct shift transmission |
Function | Oil Filter Wrench, direct shift transmission |
Additional Information
- Workshop manual must be consulted when using this tool
- Suitable for Volkswagen and Audi vehicles
- Composite handle
- Assembly lever for use on DSG gear boxes
- Designed for DSG 7 speed dual clutch gearboxes fitted to VAG vehicles
Important compatibility info
Title | Tyre Pressure/Tread Depth Gauge - Flexi Hose |
Additional Information
- Pressure release function. 45° chuck with 360° swivel, Stainless steel flexi hose (330mm) and rubber boot
- Tyre depth measurement 0- 10mm
- Accuracy plus/minus 3%
- 0-130 psi (0-800kpa) - (1BAR=100kpa)
- Dual faced gauge 50mm diameter
Important compatibility info
Material | Steel |
Colour | black/silver |
Diameter From | 51 mm |
Diameter To | 250 mm |
Type | Grinding Stone |
Function | Grinding Stone |
Additional Information
General Information
Engine Cylinder Hone 51-250mm. Engine Cylinder Hone 51-250mm
- Use with cordless drill for efficient results
- Replacement stone set Laser Part No. 2071 (consumable)
- Flexible self-aligning shaft allows use without removing cylinder
- Cleans and de glazes cylinders of carbon deposits quickly and effectively
- Adjusts from 51mm to 260mm
Important compatibility info
Title | Spline Bit - M10 x 800mm - 1/2in. Drive |
Length | 800 mm |
Spanner Size | M10 |
Drive | 1/2"D Inch |
Type | Screwdriver Bit |
Function | Screwdriver Bit |
Drive side (profile) | Male Splined |
Additional Information
General Information
Spline Bit 1/2"D M10
- A special bit designed for use on axle shaft removal on Audi and Volkswagen vehicles
- M10 x 800mm - 1/2in. Drive
- Special bit designed for use on axle shaft removal
- Socket manufactured from Chrome Vanadium, bit from Silicon Steel
Important compatibility info
Material | Nylon |
Type | Fill-/Extraction Pump, universal |
Workshop Equipment | with hand pump |
Function | Fill-/Extraction Pump, universal |
Capacity to | 1 l |
Additional Information
- One litre capacity with 0
- Ideal for gear boxes, differentials, lawn mowers, chain saws, outboard motors and suitable for oils, automatic transmission fluids, brake fluids and general purpose cleaners
- This handy mini pump makes all top up jobs easy
Important compatibility info
Material | Steel |
Type | Fitting Pliers |
Function | Fitting Pliers |
Pliers characteristics | for external safety rings |
Tool Handle Colour | Blue (2x) |
Additional Information
- These heavy duty CV Boot Clamp Pliers can be used by hand or with the assistance of a power bar and torque wrench if specific torque is required
- PVC dipped handles for comfort
- Suitable for installation of certain clamps on fuel filters, water pumps and other cooling systems
Important compatibility info
Title | Oil Drain Pan - 16 Litre |
Material | PE (Polyethylene) |
Colour | black |
Capacity | 16 l |
Type | Oil Collection Unit |
Function | Oil Collection Unit |
Number of Parts | 1 -part |
Waste oil draining | Manual |
Additional Information
General Information
Oil Drain Pan 16 litre Oil Drain Pan 16 litre.
- Meets PAHS regulations
- Made from chemical resistant material
- Helps to prevent contamination
- Universal garage use
- Anti-splash lip
Important compatibility info
Surface | Mirror-Fisnish Chrome |
Function | Extension, ring/open-ended spanner |
Type | Extension, ring/open-ended spanner |
Material | Chrome Vanadium Steel |
Length 1 | 385 mm |
Additional Information
General Information
Spanner Extension Wrench Spanner Extension Wrench.
- Gloves and goggles should be used in high powered situations
- Manufactured from Chrome Vanadium with high Chromed finish
- Universal use
- Length 385mm
- Extends the length of spanners when you need more leverage
Important compatibility info
Material | Steel |
Width to | 400 mm |
Type | Vernier Calliper, brake drum |
Title | Brake Drum Wear Gauge - 160 - 400mm |
Gauge | with analog display |
Width from | 160 mm |
Colour | black |
Function | Vernier Calliper, brake drum |
Additional Information
General Information
Brake Drum Wear Gauge. Brake Drum Wear Gauge
- Metric and Imperial scale
- Measures drum wear
- Selected steel
- Size range 160mm - 400mm fits a larger range than most similar products on the market
- Brake drum wear gauge
Important compatibility info
Additional Information
- Manufactured from S2 steel for strength
- VDE 1000V tested and certificated
- Sizes: T10, T15, T20, T25, T27, T30, T40, T45, T50
- Ideal for use on electric and hybrid vehicles
- Packed in a plastic storage
Important compatibility info
Title | Thread Repair Kit - M10 x 1.5 |
Material | Steel |
Type | Thread Tap Set |
Function | Thread Tap Set |
Number of Parts | 6 -part |
Tool Handle Colour | black |
For Thread Size | M10x1,5 |
Additional Information
General Information
Thread Repair Kit M10x1.5 Thread Repair Kit M10x1.5.
- Spare insert packs available
- For repairing and restoring damaged threads
- Kit includes insertion tool, HSS drill, HSS tap and three threaded inserts
- M10 x 1.5
Important compatibility info
Type | Testing Unit, brake fluid |
Number of LEDs | 5 |
Colour | black |
Material | Plastic |
DOT specification | DOT 3, DOT 4, DOT 5.1 |
Function | Testing Unit, brake fluid |
Additional Information
General Information
Brake Fluid Tester
- PLEASE NOTE - NOT SUITABLE FOR SILICONE BASED DOT 5 FLUID
- Suitable for DOT 3, DOT 4 & DOT 5.1
- Battery supplied
- Colour coded LEDs show level of water
- Quick and simple tool
- Essential safety check
- Identify percentage of water in brake fluid
Important compatibility info
Title | Measuring Jug - 10 Litre |
Material | PE (Polyethylene) |
Colour | white-transparent |
Capacity | 10 l |
Type | Universal Container |
Function | Universal Container |
Tool handle type | Ergonomically Shaped Handle |
Additional Information
General Information
Measuring Jug 10 Litre. Measuring Jug 10 Litre
- Manufactured from Polyethylene
- Suitable for oil, water, Ad Blue, coolant, petrol, diesel etc.
- Measuring Jug with Quart and Litre measurements
Important compatibility info
Title | Impact Socket - 52mm - 1/2in. Drive |
Material | Chrome-Molybdenum Steel |
Spanner Size | 52mm |
Shape/Form | Short |
Drive | 1/2"D Inch |
Type | Socket Wrench Insert |
Socket Driver | 1/2"D Inch |
Function | Socket Wrench Insert |
Drive side (profile) | Hexagon |
Additional Information
General Information
Socket - Air Impact 1/2"D 52mm Socket - Air Impact 1/2"D 52mm.
- 6pt single Hex
- Manufactured from Chrome Molybdenum
- Size: 52mm
- Impact socket for use with air impact tools
Important compatibility info
Title | Star Socket & Bit Set - 23 Piece |
Material | Chrome-Molybdenum Steel |
Bolt Head/Nut Design | with bore hole (temper resistant) |
Type | Screwdriver Bit Set |
Function | Screwdriver Bit Set |
Number of Parts | 23 -part |
Drive side (profile) | Torx |
Additional Information
General Information
Star Socket & Bit Set 1/4"D, 3/8"D 23pc
- 23 pc Star Socket Set includes: E4/E5/E6/E7/E8 in 1/4in. drive, E10/E12/E14/E16 in 3/8in. drive and Star Hex shank bits, tamperproof x 30mm - T7/T8/T9/T10/T15/T20/T25/T27/T30/T40/T45/T50/T55 A 3/8in. drive x 5/16in. coupler is included
- Coupler for use with bits
- Supplied in a handy blow mould case
- Bits manufactured from Chrome Molybdenum






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023