Car Parts & Accessories by Borg & Beck

Categories
Important compatibility info
Number of Wings | 11 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Number of Inlets / Outlets | 2 |
Important compatibility info
Voltage | 12 V |
Number of Teeth | 8 |
Rotation Direction | Clockwise rotation |
Rated Power | 0.8 kW |
Number of mounting bores | 2 |
Number of Thread Bores | 2 |
Function | Starter |
Type | Starter |
Important compatibility info
Voltage | 12 V |
Number of Teeth | 8 |
Rotation Direction | Clockwise rotation |
Rated Power | 0.8 kW |
Number of mounting bores | 2 |
Number of Thread Bores | 2 |
Function | Starter |
Type | Starter |
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 1002 mm |
External Teeth, Wheel Side | 28 |
Internal Teeth, wheel side | 36 |
External Teeth, Diff.Side | 37 |
Type | Drive Shaft |
Function | Drive Shaft |
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 1002 mm |
External Teeth, Wheel Side | 28 |
Internal Teeth, wheel side | 36 |
External Teeth, Diff.Side | 37 |
Type | Drive Shaft |
Function | Drive Shaft |
Important compatibility info
Length | 673 mm |
Internal Teeth, wheel side | 42 |
Function | Drive Shaft |
Type | Drive Shaft |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
Length | 673 mm |
Internal Teeth, wheel side | 42 |
Function | Drive Shaft |
Type | Drive Shaft |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
Voltage | 12 V |
Number of Teeth | 10. 12 |
Rotation Direction | Clockwise rotation |
Rated Power | 2 kW |
Number of mounting bores | 2 |
Number of Thread Bores | 2 |
Function | Starter |
Type | Starter |
Important compatibility info
Voltage | 12 V |
Number of Teeth | 10. 12 |
Rotation Direction | Clockwise rotation |
Rated Power | 2 kW |
Number of mounting bores | 2 |
Number of Thread Bores | 2 |
Function | Starter |
Type | Starter |
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 1021 mm |
External Teeth, Wheel Side | 31 |
External Teeth, Diff.Side | 31 |
Type | Drive Shaft |
Function | Drive Shaft |
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 1021 mm |
External Teeth, Wheel Side | 31 |
External Teeth, Diff.Side | 31 |
Type | Drive Shaft |
Function | Drive Shaft |
Important compatibility info
Function | Starter |
Number of Thread Bores | 2 |
Number of mounting bores | 4 |
Rated Power | 2.2 kW |
Rotation Direction | Clockwise rotation |
Number of Teeth | 11 |
Voltage | 12 V |
Type | Starter |
Manufacturer Restriction | Valeo |
Important compatibility info
Function | Starter |
Number of Thread Bores | 2 |
Number of mounting bores | 4 |
Rated Power | 2.2 kW |
Rotation Direction | Clockwise rotation |
Number of Teeth | 11 |
Voltage | 12 V |
Type | Starter |
Manufacturer Restriction | Valeo |
Important compatibility info
Number of Parts | 3 -part |
Hub Profile | 26.3 x 23.3 |
Outer diameter | 241 mm |
Function | Clutch Kit |
Type | Clutch Kit |
Number of Teeth | 23 |
Important compatibility info
Number of Parts | 3 -part |
Hub Profile | 26.3 x 23.3 |
Outer diameter | 241 mm |
Function | Clutch Kit |
Type | Clutch Kit |
Number of Teeth | 23 |
Important compatibility info
Number of Parts | 2 -part |
Hub Profile | 26 x 23.1 |
Additional Information 2 | Self-adjusting |
Outer diameter | 240 mm |
Engine Version | for engines with dual-mass flywheel |
Function | Clutch Kit |
Type | Clutch Kit |
Number of Teeth | 23 |
Important compatibility info
Number of Parts | 2 -part |
Hub Profile | 26 x 23.1 |
Additional Information 2 | Self-adjusting |
Outer diameter | 240 mm |
Engine Version | for engines with dual-mass flywheel |
Function | Clutch Kit |
Type | Clutch Kit |
Number of Teeth | 23 |
Important compatibility info
Function | Clutch Kit |
Type | Clutch Kit |
Number of Teeth | 21 |
Additional Information | with central slave cylinder |
Important compatibility info
Function | Clutch Kit |
Type | Clutch Kit |
Number of Teeth | 21 |
Additional Information | with central slave cylinder |
Important compatibility info
Height | 75 mm |
Number of Teeth | 22 |
Impeller Diameter | 122 mm |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water Pump Pulley Diameter | 63 mm |
Number of Seals | 2 |
Number of Wings | 6 |
Important compatibility info
Function | Clutch Kit |
Number of Teeth | 20 |
Type | Clutch Kit |
Additional Information | with central slave cylinder |
Important compatibility info
Function | Clutch Kit |
Number of Teeth | 20 |
Type | Clutch Kit |
Additional Information | with central slave cylinder |
Important compatibility info
External Teeth, Wheel Side | 30 |
Length | 654 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Number of Teeth, ABS ring | 52 |
External Teeth, Diff.Side | 31 |
Placement on Vehicle | Front Axle Left |
Important compatibility info
External Teeth, Wheel Side | 30 |
Length | 654 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Number of Teeth, ABS ring | 52 |
External Teeth, Diff.Side | 31 |
Placement on Vehicle | Front Axle Left |
Important compatibility info
Number of Parts | 3 -part |
Number of Teeth | 21 |
Hub Profile | 29.7 x 25.5 |
Type | Clutch Kit |
Outer diameter | 225 mm |
Engine Version | for engines with dual-mass flywheel |
Function | Clutch Kit |
Important compatibility info
Number of Parts | 3 -part |
Number of Teeth | 21 |
Hub Profile | 29.7 x 25.5 |
Type | Clutch Kit |
Outer diameter | 225 mm |
Engine Version | for engines with dual-mass flywheel |
Function | Clutch Kit |
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Pipe Diameter | 50 mm |
Length | 592 mm |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Trailing Arm |
Important compatibility info
Additional Information | with central slave cylinder |
Function | Clutch Kit |
Type | Clutch Kit |
Number of Teeth | 26 |
Important compatibility info
Additional Information | with central slave cylinder |
Function | Clutch Kit |
Type | Clutch Kit |
Number of Teeth | 26 |
Important compatibility info
Length | 585 mm |
Placement on Vehicle | Front Axle Left |
Type | Drive Shaft |
Function | Drive Shaft |
External Teeth, Diff.Side | 31 |
External Teeth, Wheel Side | 40 |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023