Important compatibility info
Additional Information | with oil drain plug |
Length | 430 mm |
Extra Description | febi Plus |
Additional Information 2 | with bore for oil-level sensor, with seal ring |
External Thread Size | M14 x 1,5 |
Function | Oil sump |
Weight | 1.8 kg |
Wet Sump Material | Cast Aluminium |
Type | Oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Operating Mode | Manual |
Paired article numbers | 177064 |
Weight | 3.35 kg |
Type | Adjuster, braking system |
Function | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Adjuster, braking system |
Weight | 3.3 kg |
Paired article numbers | 31588 |
Placement on Vehicle | Left |
Operating Mode | Automatic |
Replaces | 20200 |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 75 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Type | Deflection/Guide Pulley, v-ribbed belt |
Weight | 1.0 kg |
Width of castor bearing surface | 31 mm |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Additional Information 2 | with ball joint |
Weight | 3.302 kg |
Placement on Vehicle | Front Axle Right, Lower |
Type | Control/Trailing Arm, wheel suspension |
Cone Size | 18 mm |
Function | Control/Trailing Arm, wheel suspension |
Material | Sheet Steel |
Paired article numbers | 181405 |
External Thread Size | M14 x 1,5 |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 228 mm |
Operating Mode | Automatic |
Paired article numbers | 35095 |
Weight | 3.5 kg |
Type | Adjuster, braking system |
Function | Adjuster, braking system |
Hole Spacing | 175 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Operating Mode | Automatic |
Paired article numbers | 170387 |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Filter, crankcase ventilation |
Length | 229 mm |
Height | 46 mm |
Width | 178.5 mm |
Type | Filter, crankcase ventilation |
Weight | 0.690 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Cooler, engine oil |
Type | Oil Cooler, engine oil |
Weight | 0.393 kg |
Material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Adjuster, braking system |
Placement on Vehicle | Right |
Operating Mode | Automatic |
Paired article numbers | 31587 |
Weight | 3.2 kg |
Type | Adjuster, braking system |
Replaces | 20201 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Self-adjusting |
Weight | 3.1 kg |
Placement on Vehicle | Left |
Operating Mode | Automatic |
Paired article numbers | 31612 |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Electric |
Paired article numbers | 24139 |
Weight | 0.524 kg |
Placement on Vehicle | Right Rear |
Function | Window Regulator |
Type | Window Regulator |
Additional Information | without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Weight | 3.1 kg |
Type | Adjuster, braking system |
Paired article numbers | 31611 |
Operating Mode | Automatic |
Function | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.693 kg |
Placement on Vehicle | Front Axle Left, Lower, Rear |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 40381 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (31731)
- 1x Febi Bolt, wheel alignment (40196)
- 2x Febi Washer (07755)
- 1x Febi Nut (21557)
Important compatibility info
Placement on Vehicle | Right |
Operating Mode | Automatic |
Paired article numbers | 170386 |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Automatic |
Length | 234 mm |
Placement on Vehicle | Rear Axle Right |
Weight | 3.5 kg |
Paired article numbers | 35105 |
Type | Adjuster, braking system |
Function | Adjuster, braking system |
Hole Spacing | 160 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Automatic |
Paired article numbers | 31592 |
Function | Adjuster, braking system |
Placement on Vehicle | Right |
Weight | 3.3 kg |
Type | Adjuster, braking system |
Replaces | 20204 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Automatic |
Paired article numbers | 31593 |
Function | Adjuster, braking system |
Placement on Vehicle | Left |
Weight | 3.3 kg |
Type | Adjuster, braking system |
Replaces | 20203 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.63 kg |
Placement on Vehicle | Rear |
Operating Mode | Mechanical |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 394 mm |
Min. Length | 351 mm |
Pipe Diameter | 41 mm |
Mounting points diameter | 14 mm |
Function | Shock Absorber, driver cab suspension |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Weight | 3.500 kg |
Inner diameter 2 | 18 mm |
Inner diameter 1 | 16 mm |
Rod/Strut | Coupling Rod |
Paired article numbers | 181541 |
Length | 430 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Requires special tools for mounting |
Weight | 0.58 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 112 |
Timing Chain Size | G68HPF, G68HR |
Function | Timing Chain |
Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 35119 |
Weight | 3.502 kg |
Operating Mode | Automatic |
Placement on Vehicle | Front Axle Right |
Length | 235 mm |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Adjuster, braking system |
Paired article numbers | 31600 |
Placement on Vehicle | Rear Axle Left |
Weight | 3.7 kg |
Operating Mode | Automatic |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 31597 |
Function | Adjuster, braking system |
Weight | 3.6 kg |
Operating Mode | Automatic |
Placement on Vehicle | Rear Axle Right |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Weight | 3.038 kg |
Operating Mode | Automatic |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.560 kg |
Cone Size | 26 mm |
Placement on Vehicle | Front Axle |
Adjustable | Adjustable on one side |
Length | 865 mm |
Thread Size | M20 x 1,5 |
Rod/Strut | Push Rod |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Extra Description | ProKit |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Paired article numbers | 178689 |
Operating Mode | Automatic |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Weight | 3.123 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bore Diameter | 11 mm |
External Teeth, Wheel Side | 36 |
Number of mounting bores | 6 |
Thread Size | M16 x 1,5 |
Bolt Hole Circle Diameter | 100 mm |
Wheel Sided Joint Diameter | 98 mm |
Paired article numbers | 180785 |
Additional Information 2 | with screw |
Placement on Vehicle | Front Axle Left |
Min. Length | 480 mm |
Function | Drive Shaft |
Type | Drive Shaft |
Transmission-side joint diameter | 81.5 mm |
Weight | 6.154 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Operating Mode | Automatic |
Paired article numbers | 31613 |
Function | Adjuster, braking system |
Additional Information 2 | Self-adjusting |
Type | Adjuster, braking system |
Weight | 3.00 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.6 kg |
Placement on Vehicle | Rear Axle Left |
Operating Mode | Automatic |
Paired article numbers | 31596 |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.936 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 70 mm |
Outer diameter | 137 mm |
Inner diameter | 27.5 mm |
Number of Holes | 4 |
Bolt Hole Circle Diameter | 100 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Sealing lip material | NBR (nitrile butadiene rubber) |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Bearing Type | Angular Ball Bearing |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.322 kg |
Function | Ignition Coil |
Number of Connectors / Ports | 3 |
Type | Ignition Coil |
for OE number | 000 150 25 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.645 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 145 mm. 42 mm |
Thickness | 79 mm |
Additional Information 2 | without wheel bearing |
Number of Holes | 6 |
Number of Teeth | 27 |
Internal Thread Size | M12 x 1,5 |
Function | Wheel Hub |
Type | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 3D0 965 561 D |
Weight | 0.41 kg |
Operating Mode | Electric |
Number of Connectors / Ports | 2 |
Function | Water Recirculation Pump, parking heater |
Type | Water Recirculation Pump, parking heater |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Length | 704 mm |
Outer diameter | 104 mm |
Type | Brake Shaft, drum brake |
Function | Brake Shaft, drum brake |
Screw length below head | 659 mm |
Number of Teeth | 10 |
Paired article numbers | 172526 |
Weight | 6.530 kg |
Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.85 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 145 mm |
Thickness | 93 mm |
Number of Holes | 6 |
Number of Teeth | 30 |
Internal Thread Size | M12 x 1,5 |
Function | Wheel Hub |
Type | Wheel Hub |
Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.01 kg |
Additional Information 2 | Self-adjusting |
Placement on Vehicle | Right |
Operating Mode | Automatic |
Type | Adjuster, braking system |
Function | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 31599 |
Function | Adjuster, braking system |
Placement on Vehicle | Right |
Weight | 3.5 kg |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Door Lock, driver cab |
Function | Door Lock, driver cab |
Weight | 2.400 kg |
Length | 106.4 mm |
Thickness | 99.65 mm |
Width | 39.1 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right Front |
Operating Mode | Manual |
Paired article numbers | 178900 |
Weight | 1.7 kg |
Type | Window Regulator |
Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 21681 |
Placement on Vehicle | Front Axle Right, Lower |
Weight | 4.300 kg |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Replaces | 22460 |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 1 138 760 |
Weight | 0.360 kg |
Function | Tensioner, timing chain |
Operating Mode | Hydraulic |
Type | Tensioner, timing chain |
Additional Information
Technical Information
The correct chain tensioner has to be ascertained by the vehicle manufacturer using the VIN and looking up the according service manual.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.20 kg |
Width of castor bearing surface | 28 mm |
Outer diameter | 80 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Metal |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Adjuster, braking system |
Paired article numbers | 31605 |
Placement on Vehicle | Left |
Operating Mode | Automatic |
Weight | 3.1 kg |
Additional Information 2 | Self-adjusting |
Type | Adjuster, braking system |
Replaces | 20205; 31585 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.5 kg |
Placement on Vehicle | Rear Axle Left |
Length | 227 mm |
Operating Mode | Automatic |
Paired article numbers | 35123 |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Hole Spacing | 165 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.211 kg |
Function | Repair Kit, kingpin |
Type | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Kingpin (01543)
- 4x Febi Bush, kingpin (01544)
- 4x Febi Lock Ring, steering knuckle (01551)
- 4x Febi Seal Ring, steering knuckle (01552)
Important compatibility info
Function | Adjuster, braking system |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Operating Mode | Automatic |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Automatic |
Weight | 3.2 kg |
Placement on Vehicle | both sides |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.42 kg |
Chain Type | Silent Chain, Closed chain |
Number of Chain Links | 44 |
Timing Chain Size | Z53R |
Type | Chain Kit, oil pump drive |
Function | Chain Kit, oil pump drive |
Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (48334)
- 1x Febi Sprocket, crankshaft (48743)
- 1x Febi Sprocket/Gear, oil pump (48332)
- 1x Febi Screw (48337)
- 1x Febi Centering Bolt, crankshaft pulley (33618)
Important compatibility info
Operating Mode | Automatic |
Paired article numbers | 48606 |
Function | Adjuster, braking system |
Placement on Vehicle | Rear Axle Right |
Weight | 3.5 kg |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023