Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 1.177 kg |
| Placement on Vehicle | Front Axle Right, Rear |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 29242 |
| Cone Size | 16.5 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with bearing |
| Replaces | 29544 |
| External Thread Size | M14 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (02682)
£54.24
Important compatibility info
| Core Width | 160 mm |
| Core Depth | 26 mm |
| Function | Heat Exchanger, interior heating |
| Core Length | 190 mm |
| Additional Information | with gasket/seal |
| Weight | 0.53 kg |
| Type | Heat Exchanger, interior heating |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Paired article numbers | 09875 |
| Thread Type | with left-hand thread |
| Cone Size | 30 mm |
| Function | Tie Rod End |
| Weight | 3.2 kg |
| Length | 168 mm |
| Inner diameter | 40 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M52 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with bolts/screws |
| Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Weight | 6.422 kg |
| External Teeth, Wheel Side | 36 |
| Bore Diameter | 10.5 mm |
| Bolt Hole Circle Diameter | 94 mm |
| Thread Size | M20x1,5 |
| Additional Information 2 | with nut |
| Wheel Sided Joint Diameter | 97 mm |
| Number of mounting bores | 6 |
| Min. Length | 517 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 108 mm |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Weight | 1.837 kg |
| Outer diameter | 74 mm |
| Width | 63 mm |
| Type | Tensioner Pulley, V-ribbed belt |
| Mounting points diameter | 10 mm |
| Material | Metal |
| Width of castor bearing surface | 33 mm |
| Function | Tensioner Pulley, V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Weight | 1.560 kg |
| Function | Coiled Cable |
| Working length | 4.0 m |
| Number of Connectors / Ports | 7 |
| DIN / ISO | 7638 |
| Material | PU (Polyurethane) |
| Voltage | 24 V |
| Type | Coiled Cable |
| Temperature range to | 85 °C |
| Temperature range from | -40 °C |
| Additional Information 2 | with plug |
| Version | Aftermarket |
| Connecting plug material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
| Weight | 0.324 kg |
| Bore Diameter | 9 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Weight | 0.120 kg |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 78 |
| Type | Chain, oil pump drive |
| Function | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Bolt Hole Circle Diameter | 177 mm |
| Surface | Coated |
| Function | Brake Disc |
| Brake Disc Type | Internally Vented |
| Minimum thickness | 28 mm |
| Weight | 15.83 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 335 mm |
| Thickness | 111 mm |
| Brake Disc Thickness | 34 mm |
| Rim Hole Number | 8 -Hole |
| Internal Thread Size | M12 x 1,5 |
| Type | Brake Disc |
| for OE number | 970 423 12 12 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Additional Information 2 | with crown nut |
| Rod/Strut | Coupling Rod |
| Length | 350 mm |
| Placement on Vehicle | Front Axle |
| Extra Description | ProKit |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Weight | 3.1 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Function | Water Pump, engine cooling |
| Weight | 1.33 kg |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Material | Cast Aluminium |
| Water pump impeller material | Metal |
| Seal Material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Weight | 2.162 kg |
| Placement on Vehicle | Rear Axle |
| Type | Gasket Set, external planetary gearbox |
| Function | Gasket Set, external planetary gearbox |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel hub (06643)
- 1x Febi Ring, wheel hub (04455)
- 1x Febi Thrust Washer, external planetary gearbox (21951)
- 1x Febi Shaft Seal, wheel hub (05354)
- 1x Febi Seal Ring, wheel hub (08008)
- 1x Febi Gasket, external planetary gearbox (08009)
- 1x Febi Gasket, external planetary gearbox (08010)
- 1x Febi Gasket, external planetary gearbox (08011)
- 1x Febi Toothed Disc, external planetary gearbox (08488)
£54.24
Important compatibility info
| Weight | 0.353 kg |
| Number of Connectors / Ports | 2 |
| Type | Coolant Control Valve |
| Function | Coolant Control Valve |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Weight | 0.064 kg |
| External Thread Size | M14 x 1,5 |
| Spanner Size | 27 |
| Number of Connectors / Ports | 4 |
| Type | Oil Pressure Switch |
| Function | Oil Pressure Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.23
Important compatibility info
| Placement on Vehicle | Front, Right |
| Weight | 1.053 kg |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.23
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Additional Information 2 | with ball bearing |
| Weight | 0.825 kg |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (193564)
- 1x Febi Rolling Bearing, suspension strut support mount (176907)
£54.23
Important compatibility info
| Function | Expansion Tank, coolant |
| Material | Plastic |
| Weight | 0.59 kg |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| Number of Connectors / Ports | 2 |
| Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.23
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Weight | 6.510 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 290 mm |
| Thickness | 45 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 72 mm |
| Surface | Coated |
| Number of mounting bores | 3 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.22
Important compatibility info
| Rotor Style | Internally Vented |
| Weight | 5.2 kg |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 300 mm |
| Thickness | 47.1 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 22 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.5 mm |
| Surface | Coated |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.22
Important compatibility info
| Inner diameter | 8 mm |
| Function | Tensioner Pulley, timing belt |
| Outer diameter | 70.6 mm. 60 mm |
| Width | 21 mm |
| Weight | 0.38 kg |
| Type | Tensioner Pulley, timing belt |
| Width of castor bearing surface | 20.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.22
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023