Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 415 mm |
Spanner Size | 38 |
Function | Tie Rod |
Weight | 1.35 kg |
Extra Description | ProKit |
Type | Tie Rod |
External Thread Size | M14 x 1,5, M18 x 1,5 |
Additional Information 2 | with clamps, with seal ring, with steering bellow |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (31222)
- 1x Febi Clamping piece, tie rod (31223)
- 1x Febi Tie Rod End (26637)
- 1x Febi Clamping Clip (38756)
- 1x Febi Bellow, steering (22631)
- 1x Febi Clamping Clip (38764)
- 1x Febi Gasket, steering gear (22632)
Important compatibility info
Weight | 0.300 kg |
Number of Connectors / Ports | 7 |
Combi Switch Function | with wipe-wash function, with dynamic function (direction indicator), with wipe interval function |
Type | Steering Column Switch |
Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Paired article numbers | 17787 |
Function | Control/Trailing Arm, wheel suspension |
Material | Cast Steel |
Placement on Vehicle | Lower Front Axle, Left |
Weight | 3.300 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.94 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 40626 |
Cone Size | 21 mm |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Fastening Bolt, control arm (32417)
- 1x Febi Control/Trailing Arm, wheel suspension (31845)
- 1x Febi Fastening Bolt, control arm (40518)
Important compatibility info
Placement on Vehicle | Right |
Height | 139 mm |
Width | 525 mm |
Paired article numbers | 194120 |
Port / Connector type | AMP 7 pin |
Number of Connectors / Ports | 7 |
Light Function | with taillight, with indicator, with stop light, with rear fog light, with reverse light, with side marker light, without number plate light |
Weight | 1.4 kg |
Depth | 81 mm |
Type | Tail Light Assembly |
Fulfils ECE norm | R6, R7, R9, R38, R23, R91 |
Function | Tail Light Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 720 mm |
Rod/Strut | Guide Rod |
Cone Size | 30 mm |
Pipe Diameter | 36 mm |
Function | Centre Rod Assembly |
Weight | 7.0 kg |
Driver Position | for left-hand/right-hand drive vehicles |
Extra Description | ProKit |
Internal Thread Size | M30 x 1,5 RHT |
External Thread Size | M24 x 1,5 |
Type | Centre Rod Assembly |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 2100 mm |
Outer diameter | 8.5 mm |
Inner diameter | 3.2 mm |
Pressure | 362 bar |
Function | Hose Line, driver cab tilting device |
Weight | 0.2 kg |
Internal Thread Size | M12 x 1,5 |
Type | Hose Line, driver cab tilting device |
External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.2 kg |
Voltage | 12 V |
Number of Connectors / Ports | 2 |
Type | Interior Blower |
Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 460 mm |
Thickness | 85 mm |
Rod/Strut | Coupling Rod |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Weight | 3.117 kg |
Additional Information 2 | without rubber mount(s) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Upper |
Additional Information | with rubber-metal mounts |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 195000 |
Weight | 4.012 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 46 mm |
for OE number | 541 200 23 70 |
Outer diameter | 74 mm |
Operating Mode | Automatic |
Weight | 1.542 kg |
Type | Belt Tensioner, v-ribbed belt |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Resistor, interior blower |
Function | Resistor, interior blower |
Extra Description | febi Plus |
Number of Connectors / Ports | 4. 2 |
Weight | 0.321 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Upper Front Axle, Right |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 17136 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 1.510 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, without bearing |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.46 kg |
Material | Cast Aluminium |
Number of Teeth | 6 |
Number of Wings | 7 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber/Metal |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.31 kg |
Outer diameter | 280 mm |
Operating Mode | Electric |
Number of Connectors / Ports | 2 |
Rated Power | 300 W |
Number of Wings | 8 |
Function | Fan, engine cooling |
Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Chain Type | Simplex, Closed chain |
Number of Chain Links | 40 |
Extra Description | Basic Short Kit |
Weight | 0.29 kg |
Function | Timing Chain Kit |
Type | Timing Chain Kit |
for OE number | 0816.F6 S1 |
Timing Chain Size | G67HP, G67HR |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (33691)
- 1x Febi Tensioner, timing chain (37221)
Important compatibility info
Weight | 2.89 kg |
Internal Thread Size | M14 x 1,5 |
Placement on Vehicle | Front Axle |
Outer diameter | 139 mm. 49.4 mm |
Thickness | 101 mm |
Inner diameter | 33 mm |
Number of Holes | 5 |
Bolt Hole Circle Diameter | 113.5 mm |
Outer diameter 2 | 71 mm |
Function | Wheel Hub |
Type | Wheel Hub |
Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.07 kg |
Function | Sensor, exhaust gas temperature |
Placement on Vehicle | after soot particulate filter |
Number of Connectors / Ports | 2 |
Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.56 kg |
Function | Tensioner, timing chain |
for OE number | 615 050 08 11 |
Type | Tensioner, timing chain |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Deflection/Guide Pulley, v-ribbed belt |
Weight | 0.315 kg |
Outer diameter | 70 mm |
Material | Metal |
Type | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 29 mm |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.230 kg |
Material | Cast Aluminium |
Number of Connectors / Ports | 2 |
Opening Temperature | 105 °C |
Function | Thermostat, coolant |
Additional Information | with gasket/seal |
Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (33684)
- 1x Febi Seal, thermostat (33685)
Important compatibility info
Weight | 4.92 kg |
Additional Information | with fastening/mounting material |
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 40625 |
Cone Size | 21 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (31846)
- 1x Febi Fastening Bolt, control arm (40518)
- 2x Febi Fastening Bolt, control arm (32417)
Important compatibility info
Placement on Vehicle | Left |
Height | 139 mm |
Width | 525 mm |
Paired article numbers | 194124 |
Port / Connector type | AMP 7 pin |
Number of Connectors / Ports | 7 |
Light Function | with taillight, with indicator, with stop light, with rear fog light, with reverse light, with side marker light, with number plate light |
Weight | 1.4 kg |
Depth | 81 mm |
Type | Tail Light Assembly |
Fulfils ECE norm | R4, R6, R7, R9, R38, R23, R91 |
Function | Tail Light Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Placement on Vehicle | Lower, Front, Front Axle Right |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 174227 |
Cone Size | 24 mm |
Function | Control/Trailing Arm, wheel suspension |
Weight | 4.330 kg |
Additional Information 2 | with bearing, with ball joint |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 390 mm |
Weight | 1.778 kg |
Rod/Strut | Guide Rod |
Inner diameter | 18.2 mm |
Thickness | 47 mm |
Height | 14 mm |
Width | 31 mm |
Placement on Vehicle | Front Axle |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right, Upper |
Paired article numbers | 184455 |
Additional Information | with rubber mounts |
Material | Cast Steel |
Weight | 1.952 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Trailing Arm, Control Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front, Right |
Weight | 1.053 kg |
Function | Mounting, engine |
Type | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.064 kg |
External Thread Size | M14 x 1,5 |
Spanner Size | 27 |
Number of Connectors / Ports | 4 |
Type | Oil Pressure Switch |
Function | Oil Pressure Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 22 |
Weight | 0.144 kg |
Cable Length | 1030 mm |
Number of circuits | 4 |
Lambda Sensor | Heated |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 8 mm |
Function | Tensioner Pulley, timing belt |
Outer diameter | 70.6 mm. 60 mm |
Width | 21 mm |
Weight | 0.38 kg |
Type | Tensioner Pulley, timing belt |
Width of castor bearing surface | 20.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 39300-22600 |
Type | Sensor, intake manifold pressure |
Number of Connectors / Ports | 4 |
Weight | 0.050 kg |
Function | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.869 kg |
Number of Teeth | 141 |
Width | 25 mm |
Type | Timing Belt Kit |
Function | Timing Belt Kit |
Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (17765)
- 1x Febi Tensioner Pulley, timing belt (17063)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (17064)
Important compatibility info
Weight | 3.710 kg |
Placement on Vehicle | Front Axle |
Length | 174 mm |
Material | Rubber/Metal |
Outer diameter | 82 mm |
Thickness | 82 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 42897 |
Function | Mounting, control/trailing arm |
Weight | 0.013 kg |
Placement on Vehicle | Front Axle Left, Lower, inner, Rear |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 21 mm |
Paired article numbers | 42898 |
Bearing/Mounting Type | Rubber-Metal Mount |
Placement on Vehicle | Front Axle Right, Lower, inner, Rear |
Weight | 1.12 kg |
Outer diameter | 77 mm |
Thickness | 73 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with rolling bearing |
Inner diameter | 55 mm |
Hole Spacing | 185 mm |
Bearing Type | Rolling Bearing |
Type | Suspension, propshaft |
Function | Suspension, propshaft |
Height | 154 mm |
Length | 231 mm |
Weight | 1.937 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.545 kg |
Placement on Vehicle | from hydraulic pump to steering gear |
Function | Hydraulic Hose, steering |
Type | Hydraulic Hose, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.027 kg |
Number of Connectors / Ports | 3 |
Function | Sensor, crankshaft pulse |
Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Teeth, Diff.Side | 27 |
Placement on Vehicle | transmission sided, Rear Axle Left, Rear Axle Right |
Weight | 2.567 kg |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Int. teeth, diff.side, conn.to transm. | 33 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.07 kg |
for OE number | 03G 906 088 AS |
Number of Connectors / Ports | 2 |
Type | Sensor, exhaust gas temperature |
Function | Sensor, exhaust gas temperature |
Placement on Vehicle | behind exhaust turbocharger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.050 kg |
Replaces | 31380 |
Function | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Placement on Vehicle | Right |
Type | Mounting, engine |
for OE number | 1K0 199 262 K |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Rubber Buffer, suspension |
Material | Rubber/Metal |
Thickness | 60 mm |
Length | 185 mm |
Width | 120 mm |
Placement on Vehicle | Rear Axle |
Weight | 1.180 kg |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.100 kg |
Additional Information | with seal rings |
Material | Plastic |
Opening Temperature | 80 °C |
Function | Thermostat, oil cooling |
Type | Thermostat, oil cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.236 kg |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.76 kg |
Placement on Vehicle | Front Axle, Rear Axle |
Length | 175.4 mm |
Width | 88.8 mm |
Wear Warning Contact | excl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 29.7 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 127.8 mm |
Width | 108.7 mm |
Wear Warning Contact | prepared for wear warning indicator |
Inspection Tag | ECE R90 Approved |
Weight | 3.280 kg |
Thickness/Strength 1 | 17.7 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 22 |
Weight | 0.116 kg |
Cable Length | 750 mm |
Number of circuits | 4 |
Lambda Sensor | Heated, Regulating Sensor |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 124 mm |
Function | Fuel filter |
Outer diameter | 92 mm |
Filter type | In-Line Filter, with filter heating |
Type | Fuel filter |
Weight | 0.42 kg |
for OE number | 642 090 60 52 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Internally Vented |
Weight | 6.61 kg |
Rim Hole Number | 4 -Hole |
Placement on Vehicle | Front Axle |
Outer diameter | 294 mm |
Thickness | 44 mm |
Brake Disc Thickness | 22 mm |
Minimum thickness | 20.4 mm |
Bolt Hole Circle Diameter | 100 mm |
Centering Diameter | 64 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 50 mm |
Outer diameter | 58 mm |
Function | Tensioner Pulley, timing belt |
Weight | 0.724 kg |
Additional Information 2 | with screw |
Width of castor bearing surface | 32 mm |
Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023