Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Paired article numbers | 17786 |
| Material | Sheet Steel |
| Placement on Vehicle | Lower Front Axle, Right |
| Weight | 3.300 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Weight | 1.015 kg |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Metal |
| Material | Cast Aluminium |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Weight | 0.265 kg |
| Function | Tensioner, timing belt |
| Type | Tensioner, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Placement on Vehicle | Left |
| Length | 173 mm |
| Voltage | 24 V |
| Paired article numbers | 193009 |
| Port / Connector type | PRS |
| Number of Connectors / Ports | 2 |
| Weight | 0.228 kg |
| Mounting bores distance | 78.4 mm |
| Light Design | LED |
| Cable Length | 1250 mm |
| Manufacturer Release | ADR Zone 2 |
| Protection Type (IP Code) | IP69K |
| Type | End Outline Marker Light |
| Fulfils ECE norm | R7, R10, R91 |
| Function | End Outline Marker Light |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Weight | 1.177 kg |
| Placement on Vehicle | Front Axle Left, Rear |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 29243 |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 16.5 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with bearing |
| External Thread Size | M14 x 1,5 |
| Replaces | 29543 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (02682)
£54.24
Important compatibility info
| Max. Length | 312 mm |
| Placement on Vehicle | Front |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Type | Shock Absorber, driver cab suspension |
| Min. Length | 246 mm |
| Pipe Diameter | 38 mm. 74 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 13 mm |
| Operating Mode | Mechanical |
| Weight | 2.92 kg |
| External Thread Size | M14 x 1,5 |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Weight | 0.353 kg |
| Number of Connectors / Ports | 2 |
| Type | Coolant Control Valve |
| Function | Coolant Control Valve |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Weight | 1.177 kg |
| Placement on Vehicle | Front Axle Right, Rear |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 29242 |
| Cone Size | 16.5 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with bearing |
| Replaces | 29544 |
| External Thread Size | M14 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (02682)
£54.24
Important compatibility info
| Paired article numbers | 09875 |
| Thread Type | with left-hand thread |
| Cone Size | 30 mm |
| Function | Tie Rod End |
| Weight | 3.2 kg |
| Length | 168 mm |
| Inner diameter | 40 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M52 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with bolts/screws |
| Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Weight | 2.162 kg |
| Placement on Vehicle | Rear Axle |
| Type | Gasket Set, external planetary gearbox |
| Function | Gasket Set, external planetary gearbox |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel hub (06643)
- 1x Febi Ring, wheel hub (04455)
- 1x Febi Thrust Washer, external planetary gearbox (21951)
- 1x Febi Shaft Seal, wheel hub (05354)
- 1x Febi Seal Ring, wheel hub (08008)
- 1x Febi Gasket, external planetary gearbox (08009)
- 1x Febi Gasket, external planetary gearbox (08010)
- 1x Febi Gasket, external planetary gearbox (08011)
- 1x Febi Toothed Disc, external planetary gearbox (08488)
£54.24
Important compatibility info
| Weight | 1.792 kg |
| Internal Thread Size | M12 x 1,5 |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 145 mm. 45 mm |
| Number of Holes | 6 |
| Number of Teeth | 30 |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Housing length | 354 mm |
| Housing Diameter | 20 mm |
| Weight | 0.3 kg |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Length | 646 mm |
| Placement on Vehicle | both sides |
| Eject Force | 300 N |
| Stroke | 258 mm |
| Mounting points diameter | 17.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Additional Information | with gasket/seal |
| Additional Information 2 | with sensor, with thermostat |
| Weight | 0.36 kg |
| Type | Thermostat Housing |
| Function | Thermostat Housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Weight | 0.460 kg |
| Additional Information | with quick coupling |
| Material | Rubber |
| Inner diameter 1 | 44 mm |
| Inner diameter 2 | 84 mm |
| Type | Intake Hose, air filter |
| Function | Intake Hose, air filter |
| Extra Description | febi Plus |
| Hose Length | 260 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Weight | 6.422 kg |
| External Teeth, Wheel Side | 36 |
| Bore Diameter | 10.5 mm |
| Bolt Hole Circle Diameter | 94 mm |
| Thread Size | M20x1,5 |
| Additional Information 2 | with nut |
| Wheel Sided Joint Diameter | 97 mm |
| Number of mounting bores | 6 |
| Min. Length | 517 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 108 mm |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Width of castor bearing surface | 32 mm |
| Weight | 0.728 kg |
| Material | Metal |
| Outer diameter | 80 mm |
| Number of Ribs | 8 |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Weight | 3.445 kg |
| Placement on Vehicle | Lower, Front Axle Left, Rear |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 30256 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Type | Cable Pull, manual transmission |
| Outer length 1 | 1197 mm |
| Weight | 0.534 kg |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 890 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Weight | 0.420 kg |
| Material | Aluminium |
| Inner diameter | 35 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
| Hole Spacing | 160 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (26315)
- 1x Febi Bearing, propshaft centre bearing (21311)
£54.24
Important compatibility info
| Function | Water Pump, engine cooling |
| Weight | 1.33 kg |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Material | Cast Aluminium |
| Water pump impeller material | Metal |
| Seal Material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Function | Seal, windscreen |
| Weight | 2.14 kg |
| Type | Seal, windscreen |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Weight | 0.172 kg |
| Mounting points diameter | 6.5 mm |
| Type | Solenoid Valve, shift cylinder |
| Internal Thread Size | M10 x 1 |
| Function | Solenoid Valve, shift cylinder |
| Length | 76 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Weight | 0.18 kg |
| Number of Connectors / Ports | 7 |
| Function | Relay, glow plug system |
| Colour | Blue |
| Voltage | 12 V |
| Type | Relay, glow plug system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Bolt Hole Circle Diameter | 177 mm |
| Surface | Coated |
| Function | Brake Disc |
| Brake Disc Type | Internally Vented |
| Minimum thickness | 28 mm |
| Weight | 15.83 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 335 mm |
| Thickness | 111 mm |
| Brake Disc Thickness | 34 mm |
| Rim Hole Number | 8 -Hole |
| Internal Thread Size | M12 x 1,5 |
| Type | Brake Disc |
| for OE number | 970 423 12 12 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Weight | 1.560 kg |
| Function | Coiled Cable |
| Working length | 4.0 m |
| Number of Connectors / Ports | 7 |
| DIN / ISO | 7638 |
| Material | PU (Polyurethane) |
| Voltage | 24 V |
| Type | Coiled Cable |
| Temperature range to | 85 °C |
| Temperature range from | -40 °C |
| Additional Information 2 | with plug |
| Version | Aftermarket |
| Connecting plug material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Weight | 1.923 kg |
| Placement on Vehicle | Rear Axle, inner |
| Width | 43 mm |
| Outer diameter | 160 mm |
| Inner diameter | 105 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing |
| Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Bolt Hole Circle Diameter | 108 mm |
| Inner diameter | 39 mm |
| Additional Information 2 | without wheel bearing |
| Weight | 1.713 kg |
| Width | 999 mm |
| Outer diameter | 131.5 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Core Width | 160 mm |
| Core Depth | 26 mm |
| Function | Heat Exchanger, interior heating |
| Core Length | 190 mm |
| Additional Information | with gasket/seal |
| Weight | 0.53 kg |
| Type | Heat Exchanger, interior heating |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Inner diameter | 12 mm |
| Mounting points diameter | 12 mm |
| Width | 73 mm |
| Weight | 0.903 kg |
| Material | Metal |
| Outer diameter | 73 mm |
| Width of castor bearing surface | 42 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Repair Kit, kingpin |
| Weight | 1.554 kg |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with slide bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (35688)
- 1x Febi Bush, kingpin (30525)
- 1x Febi Bush, steering knuckle (01250)
- 1x Febi Lock Ring, steering knuckle (39386)
- 2x Febi Circlip, kingpin (02668)
- 1x Febi Lock Ring, steering knuckle (39385)
- 1x Febi Bush, steering knuckle (39439)
- 2x Febi Seal Ring, steering knuckle (01251)
- 1x Febi Grease Nipple (04187)
£54.24
Important compatibility info
| Material | Plastic |
| Weight | 0.13 kg |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
| for OE number | 06E 103 217 AD |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| External Thread Size | M22 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Length | 110 mm |
| Width | 102 mm |
| Thickness | 97 mm |
| Function | Relay Valve |
| Type | Relay Valve |
| Weight | 0.525 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Additional Information 2 | with crown nut |
| Rod/Strut | Coupling Rod |
| Length | 350 mm |
| Placement on Vehicle | Front Axle |
| Extra Description | ProKit |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Weight | 3.1 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Placement on Vehicle | Front, Left |
| Material | Plastic |
| Colour | Black |
| Function | Exterior Door Handle |
| Weight | 0.47 kg |
| Extra Description | febi Plus |
| Type | Exterior Door Handle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.24
Important compatibility info
| Weight | 0.62 kg |
| Function | Expansion Tank, coolant |
| Additional Information | with coolant level sensor |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.23
Important compatibility info
| Weight | 0.064 kg |
| External Thread Size | M14 x 1,5 |
| Spanner Size | 27 |
| Number of Connectors / Ports | 4 |
| Type | Oil Pressure Switch |
| Function | Oil Pressure Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.23
Important compatibility info
| Rotor Style | Internally Vented |
| Weight | 5.2 kg |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 300 mm |
| Thickness | 47.1 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 22 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.5 mm |
| Surface | Coated |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.22
Important compatibility info
| Rotor Style | Internally Vented |
| Weight | 7.56 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 288 mm |
| Thickness | 49.7 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 22 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 65 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.22
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.144 kg |
| Cable Length | 1030 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.22
Important compatibility info
| Inner diameter | 8 mm |
| Function | Tensioner Pulley, timing belt |
| Outer diameter | 70.6 mm. 60 mm |
| Width | 21 mm |
| Weight | 0.38 kg |
| Type | Tensioner Pulley, timing belt |
| Width of castor bearing surface | 20.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.22
Important compatibility info
| Weight | 0.869 kg |
| Number of Teeth | 141 |
| Width | 25 mm |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (17765)
- 1x Febi Tensioner Pulley, timing belt (17063)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (17064)
£54.22
Important compatibility info
| for OE number | 39300-22600 |
| Type | Sensor, intake manifold pressure |
| Number of Connectors / Ports | 4 |
| Weight | 0.050 kg |
| Function | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.22
Important compatibility info
| Paired article numbers | 42897 |
| Function | Mounting, control/trailing arm |
| Weight | 0.013 kg |
| Placement on Vehicle | Front Axle Left, Lower, inner, Rear |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.21
Important compatibility info
| Weight | 3.710 kg |
| Placement on Vehicle | Front Axle |
| Length | 174 mm |
| Material | Rubber/Metal |
| Outer diameter | 82 mm |
| Thickness | 82 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.21
Important compatibility info
| Additional Information 2 | with rolling bearing |
| Inner diameter | 55 mm |
| Hole Spacing | 185 mm |
| Bearing Type | Rolling Bearing |
| Type | Suspension, propshaft |
| Function | Suspension, propshaft |
| Height | 154 mm |
| Length | 231 mm |
| Weight | 1.937 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.21
Important compatibility info
| Weight | 0.545 kg |
| Placement on Vehicle | from hydraulic pump to steering gear |
| Function | Hydraulic Hose, steering |
| Type | Hydraulic Hose, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.20
Important compatibility info
| Material | Metal |
| Outer diameter | 80 mm |
| Operating Mode | Automatic |
| Weight | 1.079 kg |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.20
Important compatibility info
| Weight | 0.390 kg |
| Type | Coolant Control Valve |
| Function | Coolant Control Valve |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.20
Important compatibility info
| Weight | 0.027 kg |
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.20
Important compatibility info
| Outer diameter | 89 mm |
| Inner diameter | 51 mm |
| Placement on Vehicle | Front Axle |
| Width | 55 mm |
| Weight | 1.619 kg |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.20
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023