Important compatibility info
Placement on Vehicle | Front Axle Left, Lower |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Paired article numbers | 37572 |
Material | Cast Steel |
Weight | 4.02 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.24 kg |
Width | 25 mm |
Outer diameter | 148 mm |
Inner diameter | 44 mm |
Number of Ribs | 5 |
Parameter | 6PK |
Function | Belt Pulley, crankshaft |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.083 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 1225 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.07 kg |
Number of Connectors / Ports | 2 |
Function | Sensor, exhaust gas temperature |
Type | Sensor, exhaust gas temperature |
Placement on Vehicle | behind exhaust turbocharger |
for OE number | 045 906 088 J |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | transmission sided, Front Axle Left |
Weight | 2.639 kg |
External Teeth, Diff.Side | 29 |
Int. teeth, diff.side, conn.to transm. | 35 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Drive Shaft |
Weight | 5.780 kg |
External Teeth, Wheel Side | 36 |
Bolt Hole Circle Diameter | 86 mm |
Wheel Sided Joint Diameter | 89 mm |
Transmission-side joint diameter | 100 mm |
Function | Drive Shaft |
Additional Information 2 | with nut |
Thread Size | M20x1,5 |
Number of mounting bores | 6 |
Min. Length | 558 mm |
Placement on Vehicle | Front Axle Left |
Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing length | 206 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Piston conrod diameter | 6 mm |
Mounting points diameter | 16.5 mm |
Stroke | 135 mm |
Eject Force | 288 N |
Housing Diameter | 16 mm |
Weight | 0.2 kg |
Length | 363 mm |
Placement on Vehicle | Right Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Length | 400 mm |
Weight | 0.570 kg |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Lower, Front |
Material | Sheet Steel |
Inner diameter | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 78 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Weight | 0.877 kg |
Width of castor bearing surface | 28 mm |
Material | Metal |
Width | 48 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Requires special tools for mounting |
Weight | 0.106 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 52 |
Type | Chain, oil pump drive |
Function | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Operating Mode | Automatic |
Housing material | Aluminium |
Weight | 1.660 kg |
Outer diameter | 74 mm |
Width of castor bearing surface | 38 mm |
Replaces | 27116 |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Opening Temperature | 92 °C |
Type | Thermostat, coolant |
Housing Type | with housing |
Function | Thermostat, coolant |
Weight | 0.263 kg |
Additional Information | with temperature sensor, with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Sensor, exhaust gas temperature |
Weight | 0.049 kg |
External Thread Size | M14 x 1,5 |
Function | Sensor, exhaust gas temperature |
Lambda Sensor | Heated |
Cable Length | 215 mm |
Number of Connectors / Ports | 2 |
Placement on Vehicle | before soot particulate filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Wire Diameter | 15.3 mm |
Length | 322 mm |
Outer diameter | 115 mm |
Weight | 3.1 kg |
Function | Suspension Spring |
Number of Coils | 7.3 |
Type | Suspension Spring |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
External Teeth, Diff.Side | 34 |
Weight | 1.946 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Aluminium |
Water pump impeller material | Metal |
Seal Material | Rubber |
Function | Water Pump, engine cooling |
Weight | 1.037 kg |
Number of Wings | 7 |
Type | Water Pump, engine cooling |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Upper |
Weight | 2.23 kg |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 41766 |
Material | Cast Steel |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Replaces | 41782 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.6 kg |
Paired article numbers | 42678 |
Function | Tie Rod |
Thickness | 130 mm |
Placement on Vehicle | Front Axle Left |
Length | 410 mm |
Spanner Size | 22 |
Extra Description | ProKit |
Type | Tie Rod |
Additional Information 2 | with crown nut |
External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Weight | 0.496 kg |
Function | Cable Pull, manual transmission |
Outer length 1 | 1262 mm |
Inner length 1 | 893 mm |
Type | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gasket, cylinder head cover |
Type | Gasket, cylinder head cover |
Weight | 0.140 kg |
Thickness | 11 mm |
Material | ACM (Polyacrylate) |
Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023