Important compatibility info
Thread Measurement 2 | M14X2.0 |
Length | 322 mm |
Thread Measurement 1 | M14X1.5 |
Function | Inner Tie Rod |
Axle Joint Thread Type | with right-hand thread, with external thread |
Axle Joint Length | 322 mm |
Type | Inner Tie Rod |
Important compatibility info
Axle Joint Thread Type | with right-hand thread, with external thread |
Axle Joint Length | 239 mm |
Thread Measurement 2 | M12X1.5 |
Length | 239 mm |
Thread Measurement 1 | M14X1.5 |
Function | Inner Tie Rod |
Type | Inner Tie Rod |
Important compatibility info
Thread Measurement 2 | M14X1.5 |
Length | 342 mm |
Thread Measurement 1 | M16X1.5 |
Function | Inner Tie Rod |
Axle Joint Length | 342 mm |
Axle Joint Thread Type | with right-hand thread, with external thread |
Type | Inner Tie Rod |
Important compatibility info
Axle Joint Length | 243 mm |
Thread Measurement 2 | M16X1.5 |
Thread Measurement 1 | M16X1.5 |
Length | 243 mm |
Function | Inner Tie Rod |
Type | Inner Tie Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Function | Wheel Bearing Kit |
Width 1 | 94 mm |
Outer diameter 1 | 140 mm |
Inner diameter 1 | 26 mm |
Additional Information 2 | with integrated ABS sensor |
Bearing Code | Gen 3 |
Type | Wheel Bearing Kit |
Placement on Vehicle | Rear Axle |
Important compatibility info
Bearing Code | Gen 1 |
Replaces | BWK121 |
Inner diameter 1 | 35 mm |
Outer diameter 1 | 66 mm |
Only in connection with | BHN207, FHN207 |
Width 1 | 37 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Placement on Vehicle | Front Axle |
Important compatibility info
Inner diameter 1 | 30 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Placement on Vehicle | Rear Axle |
Important compatibility info
Function | Auxiliary water pump (heating water circuit) |
Port / Connector type | 2 PIN |
Operating Mode | Electronic |
Type | Auxiliary water pump (heating water circuit) |
Voltage | 12 V |
Important compatibility info
Number of Clips | 2 |
Function | Brake Pad Set, disc brake |
Number of pads | 4 |
Thickness/Strength 1 | 15.8 mm |
Type | Brake Pad Set, disc brake |
Brake System | Ate - Teves |
Wear Warning Contact | not prepared for wear warning indicator |
Height 1 | 57.7 mm |
Height 2 | 55.7 mm |
Width 1 | 122.8 mm |
Placement on Vehicle | Rear Axle |
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 881 mm |
External Teeth, Wheel Side | 25 |
External Teeth, Diff.Side | 25 |
Type | Drive Shaft |
Function | Drive Shaft |
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Mounting points diameter | 14 mm |
Length | 161 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper |
Paired article numbers | FCA7959 |
Diameter | 12 mm |
Material | Steel |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
Function | Brake Disc |
Centering Diameter | 60 mm |
Minimum thickness | 24 mm |
Outer diameter | 276 mm |
Number of Holes | 5 |
Rotor Style | Vented |
Quantity Unit | Set |
Brake Disc Thickness | 26 mm |
Height | 45.5 mm |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Surface | Coated |
Number of mounting bores | 1 |
Important compatibility info
Opening Temperature | 87 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Additional Information | with gaskets/seals |
Housing Type | with housing |
Important compatibility info
Height | 114 mm |
Function | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
Inner diameter | 10 mm |
Type | Mounting, engine |
Placement on Vehicle | Lower Right |
Important compatibility info
Function | Conversion Set, clutch |
Type | Conversion Set, clutch |
Number of Teeth | 22 |
Important compatibility info
Material | Plastic |
Inner diameter | 15.87 mm |
Type | Master Cylinder, clutch |
Function | Master Cylinder, clutch |
Important compatibility info
Wear Warning Contact | excl. wear warning contact |
Placement on Vehicle | Rear Axle |
Thickness/Strength 1 | 15.8 mm |
Number of Clips | 4 |
Brake System | Lucas - Girling |
Number of threaded bolts | 4 |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Height 1 | 57.3 mm |
Width 1 | 94.8 mm |
Important compatibility info
Function | Wiper Motor |
Type | Wiper Motor |
Voltage | 12 V |
Placement on Vehicle | Front |
Additional Information | without rod assembly |
Important compatibility info
Surface | Coated |
Rotor Style | Vented |
Number of Holes | 4 |
Outer diameter | 269 mm |
Brake Disc Thickness | 20 mm |
Height | 64 mm |
Minimum thickness | 18 mm |
Centering Diameter | 68 mm |
Function | Brake Disc |
Placement on Vehicle | Rear Axle |
Type | Brake Disc Rotor |
Quantity | 1 |
Number of mounting bores | 2 |
Important compatibility info
Thread Measurement 2 | M10x1 |
Length | 495 mm |
Function | Brake Hose |
Thread Measurement 1 | M10x1 |
Type | Brake Hose |
Thread Type | with internal thread, with external thread |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023