Important compatibility info
Weight | 2.162 kg |
Placement on Vehicle | Rear Axle |
Type | Gasket Set, external planetary gearbox |
Function | Gasket Set, external planetary gearbox |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel hub (06643)
- 1x Febi Ring, wheel hub (04455)
- 1x Febi Thrust Washer, external planetary gearbox (21951)
- 1x Febi Shaft Seal, wheel hub (05354)
- 1x Febi Seal Ring, wheel hub (08008)
- 1x Febi Gasket, external planetary gearbox (08009)
- 1x Febi Gasket, external planetary gearbox (08010)
- 1x Febi Gasket, external planetary gearbox (08011)
- 1x Febi Toothed Disc, external planetary gearbox (08488)
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Diameter | 12 mm |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Material | Steel |
Length | 170 mm |
Rod/Strut | Coupling Rod |
Weight | 0.465 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Wheel Bearing Kit |
Sealing lip material | NBR (nitrile butadiene rubber) |
Width | 46 mm |
Inner diameter | 32 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Weight | 2.228 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 72 mm |
Additional Information 2 | with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 158 mm |
Weight | 3.1 kg |
Placement on Vehicle | Rear Axle |
Length | 263 mm |
Spring Design | Coil spring with inconstant wire diameter |
Function | Suspension Spring |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.07 kg |
Number of Connectors / Ports | 2 |
Function | Sensor, exhaust gas temperature |
Type | Sensor, exhaust gas temperature |
Placement on Vehicle | behind exhaust turbocharger |
for OE number | 045 906 088 J |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 09875 |
Thread Type | with left-hand thread |
Cone Size | 30 mm |
Function | Tie Rod End |
Weight | 3.2 kg |
Length | 168 mm |
Inner diameter | 40 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
External Thread Size | M24 x 1,5 |
Internal Thread Size | M52 x 1,5 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with bolts/screws |
Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear, both sides |
Cable Length | 200 mm |
Number of circuits | 15 |
Function | Cable Repair Set, door |
Extra Description | febi Plus |
Type | Cable Repair Set, door |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Link/Coupling Rod, stabiliser bar |
Rod/Strut | Coupling Rod |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information 2 | with screw |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 283 mm |
Additional Information | Change interval/date according to gas spring imprint |
Function | Gas Spring, bonnet |
Housing length | 161.5 mm |
Weight | 0.2 kg |
Housing Diameter | 18 mm |
Eject Force | 395 N |
Stroke | 90 mm |
Mounting points diameter | 17.8 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Timing Chain |
Function | Timing Chain |
Weight | 0.383 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 134 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Air Filter |
Filter type | Filter Insert |
Type | Air Filter |
Inner diameter | 190 mm |
Height | 559 mm |
Outer diameter | 282 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pipe Diameter | 36 mm |
Function | Link/Coupling Rod, stabiliser bar |
Weight | 3.900 kg |
Placement on Vehicle | Rear Axle |
Length | 350 mm |
Rod/Strut | Coupling Rod |
Cone Size | 28.9 mm. 32.0 mm |
Extra Description | ProKit |
External Thread Size | M22 x 1,5, M24 x 1,5 |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (27254)
- 2x Febi Nut, stabiliser bar (27249)
Important compatibility info
Function | Tappet |
Weight | 0.364 kg |
Type | Tappet |
Outer diameter | 35.5 mm |
Thickness | 92 mm |
Operating Mode | Mechanical |
Placement on Vehicle | Exhaust Side, Intake Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Expansion Tank, coolant |
Material | Plastic |
Weight | 0.59 kg |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
Number of Connectors / Ports | 2 |
Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Screw length below head | 610 mm |
Function | Brake Shaft, drum brake |
Type | Brake Shaft, drum brake |
Paired article numbers | 174145 |
Number of Teeth | 10 |
Length | 655 mm |
Placement on Vehicle | Left |
Weight | 6.58 kg |
Outer diameter | 85 mm |
Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.57 kg |
Function | Oil Cooler, automatic transmission |
Type | Oil Cooler, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.482 kg |
Function | Brake Master Cylinder |
Material | Aluminium |
Piston Diameter | 22.2 mm |
Type | Brake Master Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 398 mm |
Number of Teeth | 143 |
Width | 18 mm |
Function | Ring Gear, flywheel |
Outer diameter | 435 mm |
Weight | 2.658 kg |
Type | Ring Gear, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.975 kg |
Material | Plastic |
Colour | Black |
Number of Connectors / Ports | 2 |
Function | Expansion Tank, coolant |
Additional Information | with coolant level sensor |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid, with breather valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.560 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Placement on Vehicle | Rear |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with clamps |
Material | Rubber |
Hose Length | 340 mm |
Inner diameter 1 | 75 mm |
Inner diameter 2 | 57 mm |
Weight | 0.820 kg |
Function | Intake Hose, air filter |
Inner diameter 3 | 20 mm |
Extra Description | febi Plus |
Type | Intake Hose, air filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M24 x 1,5 |
Number of Teeth, ABS ring | 48 |
Seal Diameter | 100 mm |
Length | 164 mm |
Placement on Vehicle | Front Axle Left, Wheel Side, Front Axle Right |
Weight | 3.410 kg |
Internal Teeth, wheel side | 27 |
External Teeth, Wheel Side | 29 |
Outer diameter | 100 mm |
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Belt Pulley, crankshaft |
Width | 40 mm |
Number of Ribs | 5 |
Weight | 1.732 kg |
Outer diameter | 144 mm |
Parameter | 6 PK |
Function | Belt Pulley, crankshaft |
Inner diameter | 27 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.12 kg |
Number of Connectors / Ports | 16 |
Placement on Vehicle | Right |
Operating Mode | Electric |
Paired article numbers | 33720 |
Function | Actuator, seat adjustment |
Extra Description | febi Plus |
Type | Actuator, seat adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.16 kg |
Placement on Vehicle | Rear Axle Left, Upper, Rear Axle Right |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.304 kg |
Extra Description | febi Plus |
Material | FVMQ [fluorosilicone rubber), Plastic |
Function | Valve, crankcase ventilation |
Type | Valve, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing Type | with housing |
Type | Thermostat, coolant |
Opening Temperature | 80 °C |
Function | Thermostat, coolant |
Weight | 0.180 kg |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.770 kg |
Thickness/Strength 1 | 17.4 mm |
Type | Brake Pad Set, disc brake |
Length | 157.7 mm |
Function | Brake Pad Set, disc brake |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Width | 57.2 mm |
Placement on Vehicle | Front Axle |
Additional Information 2 | with anti-squeak plate, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.083 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 1225 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Ribs | 5 |
Parameter | 6PK |
Function | Belt Pulley, crankshaft |
Outer diameter | 155 mm |
Thickness | 37 mm |
Inner diameter | 33 mm |
Type | Belt Pulley, crankshaft |
Weight | 1.8 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle, Front |
Function | Bush Set, axle beam |
Weight | 0.736 kg |
Inner diameter | 16 mm |
Outer diameter | 66 mm |
Material | Rubber/Metal |
Width | 59 mm |
Type | Bush Set, axle beam |
Additional Information 2 | with bolts/screws |
Additional Information | with stop plates |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (10155)
- 2x Febi Bushing, axle cross member (06668)
- 2x Febi Screw (06673)
Important compatibility info
Function | Belt Pulley, crankshaft |
Outer diameter | 153 mm |
Thickness | 32 mm |
Inner diameter | 48 mm |
Number of Ribs | 5 |
Colour | Black |
Parameter | 6PK |
Weight | 1.79 kg |
Type | Belt Pulley, crankshaft |
Hole Spacing | 62 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.16 kg |
Operating Mode | Hydraulic |
Function | Tensioner, timing belt |
Type | Tensioner, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.040 kg |
Length | 625 mm |
Number of Connectors / Ports | 2 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 182613 |
Weight | 2.13 kg |
Material | Cast Iron |
Placement on Vehicle | Rear Axle Right |
Type | Brake Caliper |
Function | Brake Caliper |
Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Function | Brake Caliper |
Brake caliper piston diameter | 54 mm |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 185644 |
Weight | 3.0 kg |
Brake Caliper Type | Brake Caliper (1 piston) |
Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.0 kg |
Type | Brake Caliper |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 185643 |
Function | Brake Caliper |
Brake caliper piston diameter | 54 mm |
Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control Element, parking brake caliper |
Type | Control Element, parking brake caliper |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Extra Description | febi Plus |
Number of Connectors / Ports | 3 |
Number of Teeth | 12 |
Weight | 0.500 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Brake caliper piston diameter | 34 mm |
Function | Brake Caliper |
Type | Brake Caliper |
Weight | 2.13 kg |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 182614 |
Material | Cast Iron |
Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with screw |
Weight | 0.68 kg |
Width | 34 mm |
Outer diameter | 72 mm |
Type | Tensioner Pulley, timing belt |
Function | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
Placement on Vehicle | Right |
Weight | 1.73 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Lock System | with double sealing |
Number of Connectors / Ports | 7 |
Extra Description | febi Plus |
Additional Information | with adjuster |
Function | Door Lock |
Placement on Vehicle | Left Front |
Paired article numbers | 178398 |
Weight | 0.590 kg |
Type | Door Lock |
Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 7 |
Lock System | with double sealing |
Operating Mode | Electric |
Placement on Vehicle | Right Front |
Additional Information | with adjuster |
Weight | 0.573 kg |
Type | Door Lock |
Function | Door Lock |
Extra Description | febi Plus |
Paired article numbers | 184634 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Air Suspension Valve |
Weight | 0.340 kg |
Inner diameter | 9.5 mm |
Length | 131 mm |
Internal Thread Size | M12 x 1,5 |
Type | Air Suspension Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.12 kg |
Placement on Vehicle | Lower |
Function | Tensioner, timing chain |
Type | Tensioner, timing chain |
Operating Mode | Hydraulic |
Additional Information 2 | with cap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 5 -Hole |
Weight | 6.35 kg |
Placement on Vehicle | Front Axle |
Outer diameter | 284 mm |
Thickness | 73 mm |
Brake Disc Thickness | 22 mm |
Minimum thickness | 20.4 mm |
Bolt Hole Circle Diameter | 120 mm |
Function | Brake Disc |
Rotor Style | Internally Vented |
Number of mounting bores | 1 |
Surface | Coated |
Centering Diameter | 79 mm |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 7.050 kg |
Rotor Style | Internally Vented |
Placement on Vehicle | Front Axle |
Outer diameter | 292 mm |
Thickness | 73.2 mm |
Brake Disc Thickness | 22 mm |
Minimum thickness | 20.4 mm |
Bolt Hole Circle Diameter | 120 mm |
Centering Diameter | 79 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Internally Vented |
Rim Hole Number | 5 -Hole |
Weight | 5.4 kg |
Placement on Vehicle | Front Axle |
Outer diameter | 258 mm |
Thickness | 58.3 mm |
Brake Disc Thickness | 24 mm |
Bolt Hole Circle Diameter | 110 mm |
Surface | Coated |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Outer diameter | 300 mm |
Thickness | 53.5 mm |
Rim Hole Number | 5 -Hole |
Weight | 6.926 kg |
Replaces | 23210 |
Function | Brake Disc |
Number of mounting bores | 1 |
Surface | Coated |
Centering Diameter | 67 mm |
Bolt Hole Circle Diameter | 112 mm |
Minimum thickness | 19.4 mm |
Brake Disc Thickness | 22 mm |
Rotor Style | Internally Vented |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 69 mm |
Paired article numbers | 174236 |
Inner diameter 1 | 26 mm |
Function | Mounting, control/trailing arm |
Inner diameter 2 | 30 mm |
Type | Mounting, control/trailing arm |
Weight | 0.720 kg |
Length | 194 mm |
Width | 86 mm |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle Left, Lower, Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023