Important compatibility info
Placement on Vehicle | Rear Axle Left |
Type | Link/Coupling Rod, stabiliser bar |
Length | 300 mm |
Thickness | 103 mm |
Pipe Diameter | 36 mm |
Weight | 2.2 kg |
Additional Information | with nuts |
Cone Size | 26 mm |
Paired article numbers | 175169 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | before exhaust turbocharger |
Function | Sensor, exhaust gas temperature |
Cable Length | 536 mm |
Spanner Size | 17 |
Number of Connectors / Ports | 2 |
Weight | 0.07 kg |
External Thread Size | M14 x 1,5 |
Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Drive Shaft |
Weight | 5.780 kg |
External Teeth, Wheel Side | 36 |
Bolt Hole Circle Diameter | 86 mm |
Wheel Sided Joint Diameter | 89 mm |
Transmission-side joint diameter | 100 mm |
Function | Drive Shaft |
Additional Information 2 | with nut |
Thread Size | M20x1,5 |
Number of mounting bores | 6 |
Min. Length | 558 mm |
Placement on Vehicle | Front Axle Left |
Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Wire Diameter | 15.3 mm |
Length | 322 mm |
Outer diameter | 115 mm |
Weight | 3.1 kg |
Function | Suspension Spring |
Number of Coils | 7.3 |
Type | Suspension Spring |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
External Teeth, Diff.Side | 34 |
Weight | 1.946 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing length | 206 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Piston conrod diameter | 6 mm |
Mounting points diameter | 16.5 mm |
Stroke | 135 mm |
Eject Force | 288 N |
Housing Diameter | 16 mm |
Weight | 0.2 kg |
Length | 363 mm |
Placement on Vehicle | Right Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Ball Joint |
Paired article numbers | 41708 |
Steering arm type | for control arm |
Placement on Vehicle | Front Axle Right, Lower |
Type | Ball Joint |
Weight | 1.1 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.274 kg |
Bore Diameter | 29 mm |
Fill Medium | Brake Fluid |
Type | Master Cylinder, clutch |
Function | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 72.9 mm |
Type | Thermostat, coolant |
Weight | 0.21 kg |
Opening Temperature | 86 °C |
Function | Thermostat, coolant |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 7.518 kg |
Rotor Style | Internally Vented |
Placement on Vehicle | Front Axle |
Outer diameter | 296 mm |
Thickness | 76 mm |
Brake Disc Thickness | 22 mm |
Minimum thickness | 20.4 mm |
Bolt Hole Circle Diameter | 120 mm |
Centering Diameter | 79 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Operating Mode | Electric |
Type | Auxiliary water pump (cooling water circuit) |
Function | Auxiliary water pump (cooling water circuit) |
Weight | 0.25 kg |
Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Weight | 0.496 kg |
Function | Cable Pull, manual transmission |
Outer length 1 | 1262 mm |
Inner length 1 | 893 mm |
Type | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 74 22 203 109 SK3 |
Function | Sealing Set, air compressor |
Weight | 0.5 kg |
Type | Sealing Set, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer length 1 | 1312 mm |
Inner length 1 | 960 mm |
Placement on Vehicle | Right |
Paired article numbers | 179938 |
Weight | 0.446 kg |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.7 kg |
Placement on Vehicle | Rear Axle, Front Axle |
Length | 175.5 mm |
Width | 95.2 mm |
Wear Warning Contact | excl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 27 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.835 kg |
Material | Cast Aluminium |
Number of Wings | 6 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Paper |
Type | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Metal |
Weight | 1.690 kg |
Outer diameter | 74 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Width of castor bearing surface | 38 mm |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Coils | 6.5 |
Function | Suspension Spring |
Outer diameter | 162 mm |
Length | 343 mm |
Placement on Vehicle | Rear Axle |
Weight | 4.05 kg |
Wire Diameter | 16 mm |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.740 kg |
Placement on Vehicle | Front Axle Right, Lower, Rear |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 21196 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (21194)
Important compatibility info
Placement on Vehicle | Front Axle Left, Upper |
Weight | 2.23 kg |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 41766 |
Material | Cast Steel |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Replaces | 41782 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023