Important compatibility info
Function | Suspension, propshaft |
Hole Spacing | 194 mm |
Type | Suspension, propshaft |
Bearing Type | Rolling Bearing |
Weight | 2.363 kg |
Inner diameter | 50 mm |
Additional Information 2 | with rolling bearing |
Additional Information | with fastening/mounting material |
Length | 234 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 22 |
Weight | 0.086 kg |
Cable Length | 460 mm |
Number of circuits | 4 |
Lambda Sensor | Heated, Diagnostic Probe |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 155 mm |
Width | 92 mm |
Outer diameter | 55 mm |
Opening Temperature | 80 °C. 87 °C |
Weight | 0.366 kg |
Function | Thermostat, coolant |
Additional Information | with gasket/seal |
Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 21 mm |
Function | Belt Tensioner, v-ribbed belt |
Operating Mode | Automatic |
Outer diameter | 75 mm |
Material | Aluminium |
Weight | 0.58 kg |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Left, Rear |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 34656 |
Weight | 0.988 kg |
Additional Information | with fastening/mounting material |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (12378)
Important compatibility info
Function | Brake Pad Set, disc brake |
Thickness/Strength 1 | 16.8 mm |
Width | 109.5 mm |
Inspection Tag | ECE R90 Approved |
Placement on Vehicle | Front Axle |
Length | 176 mm |
Weight | 4.306 kg |
Wear Warning Contact | prepared for wear warning indicator |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M12 x 1,5 |
Type | Solenoid Valve, retarder |
Number of Connectors / Ports | 2 |
Voltage | 24 V |
Function | Solenoid Valve, retarder |
Weight | 0.50 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 47 mm |
Outer diameter | 170 mm |
Inner diameter | 110 mm |
Bearing Type | Tapered Roller Bearing |
Function | Wheel Bearing |
Placement on Vehicle | Rear Axle Left, inner, Rear Axle Right |
Weight | 3.770 kg |
Type | Wheel Bearing |
Bearing Code | 33022 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.2 kg |
Type | Window Regulator |
Function | Window Regulator |
Paired article numbers | 175462 |
Placement on Vehicle | Right Front |
Additional Information | without electric motor |
Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | without electric motor |
Placement on Vehicle | Left Front |
Function | Window Regulator |
Type | Window Regulator |
Weight | 1.2 kg |
Paired article numbers | 175461 |
Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 10 |
Operating Mode | Electric |
Placement on Vehicle | Right Front |
Additional Information | with adjuster |
Paired article numbers | 178560 |
Weight | 0.593 kg |
Type | Door Lock |
Function | Door Lock |
Extra Description | febi Plus |
Lock System | with double sealing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.42 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 95 mm |
Outer diameter | 137 mm |
Inner diameter | 25 mm |
Number of Holes | 5 |
Bolt Hole Circle Diameter | 110 mm |
Number of Connectors / Ports | 2 |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Master Cylinder, clutch |
Type | Master Cylinder, clutch |
Fill Medium | Brake Fluid (only DOT 4) |
Weight | 0.302 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Outer diameter | 40 mm |
Additional Information 2 | without wheel bearing |
Inner diameter | 28.5 mm |
Bolt Hole Circle Diameter | 100 mm |
Weight | 1.546 kg |
Bearing Type | Tapered Roller Bearing |
Type | Wheel Hub |
Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.772 kg |
External Teeth, Wheel Side | 21 |
Thread Size | M20x1,5 |
Function | Drive Shaft |
Type | Drive Shaft |
External Teeth, Diff.Side | 22 |
Min. Length | 855 mm |
Wheel Sided Joint Diameter | 79.4 mm |
Transmission-side joint diameter | 75.5 mm |
Additional Information 2 | with nut |
Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.03 kg |
Placement on Vehicle | Right |
Length | 151 mm |
Width | 160 mm |
Thickness | 124.4 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 1807 GG |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing length | 276.5 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Piston conrod diameter | 8 mm |
Mounting points diameter | 17.8 mm |
Stroke | 194 mm |
Eject Force | 355 N |
Housing Diameter | 18 mm |
Weight | 0.2 kg |
Length | 504 mm |
Placement on Vehicle | Right Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
External Thread Size | M14 x 1,5 |
Placement on Vehicle | Front Axle Left, Lower, Rear |
Material | Steel |
Additional Information 2 | with ball joint |
Paired article numbers | 174590 |
Weight | 3.15 kg |
Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower, Rear |
Material | Steel |
Additional Information 2 | with ball joint |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Paired article numbers | 174589 |
Type | Control/Trailing Arm, wheel suspension |
External Thread Size | M14 x 1,5 |
Weight | 3.15 kg |
Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Operating Mode | Pneumatic |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 256 mm |
Min. Length | 202 mm |
Pipe Diameter | 38 mm |
Mounting points diameter | 16 mm |
Function | Shock Absorber, driver cab suspension |
Weight | 0.910 kg |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Transmission Type | 5-Speed Manual Transmission |
Weight | 0.510 kg |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Transmission ID | C510 |
Inner length 1 | 849 mm |
Outer length 1 | 1174 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.180 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 51 mm |
Outer diameter | 96 mm |
Inner diameter | 54 mm |
Bearing Type | Tapered Roller Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
for OE number | 43570-60011 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Belt Pulley, crankshaft |
Outer diameter | 153 mm |
Thickness | 32 mm |
Inner diameter | 48 mm |
Number of Ribs | 5 |
Colour | Black |
Parameter | 6PK |
Weight | 1.79 kg |
Type | Belt Pulley, crankshaft |
Hole Spacing | 62 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 22 |
Weight | 0.105 kg |
Cable Length | 471 mm |
Number of circuits | 4 |
Lambda Sensor | Heated, Diagnostic Probe |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Number of Wings | 6 |
Material | Cast Aluminium |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Seal Material | Paper |
Weight | 1.130 kg |
Additional Information 2 | with studs |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Sensor, exhaust gas temperature |
Weight | 0.049 kg |
External Thread Size | M14 x 1,5 |
Function | Sensor, exhaust gas temperature |
Lambda Sensor | Heated |
Cable Length | 215 mm |
Number of Connectors / Ports | 2 |
Placement on Vehicle | before soot particulate filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.47 kg |
Placement on Vehicle | Left Rear |
Paired article numbers | 01961 |
Function | Door Seal |
Type | Door Seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Colour | Black |
Number of Connectors / Ports | 15 |
Function | Steering Column Switch |
Combi Switch Function | with indicator function, with light dimmer function, with wipe-wash function, with wipe interval function, with klaxon |
Weight | 0.525 kg |
Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 44 mm |
Outer diameter | 83 mm |
Width | 37 mm |
Bearing Type | Angular Ball Bearing |
Sealing lip material | NBR (nitrile butadiene rubber) |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Additional Information | with fastening/mounting material |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 0.9 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Size | M22x1,5 |
Function | Drive Shaft |
Additional Information 2 | with nut |
Placement on Vehicle | Front Axle Left |
Type | Drive Shaft |
Transmission-side joint diameter | 81.6 mm |
Wheel Sided Joint Diameter | 83 mm |
Min. Length | 629 mm |
External Teeth, Diff.Side | 26 |
Paired article numbers | 181565 |
External Teeth, Wheel Side | 27 |
Weight | 6.122 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023