Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Slave Cylinder, clutch |
| Weight | 0.200 kg |
| Type | Slave Cylinder, clutch |
| for OE number | 21 52 6 785 964 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.24
Important compatibility info
| Weight | 1.105 kg |
| Number of Connectors / Ports | 4 |
| Placement on Vehicle | Front |
| Function | Wiper Motor |
| Voltage | 12 V |
| Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.24
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 24532 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 5.500 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.24
Important compatibility info
| Weight | 1.269 kg |
| Number of Wings | 8 |
| Type | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Material | Cast Aluminium |
| Water pump impeller material | Plastic |
| Function | Water Pump, engine cooling |
| Seal Material | Paper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.24
Important compatibility info
| Weight | 5.500 kg |
| Placement on Vehicle | Front Axle Left |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 24533 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.24
Important compatibility info
| Rotor Style | Internally Vented |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
| Weight | 6.0 kg |
| Surface | Coated |
| Centering Diameter | 55 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Minimum thickness | 19 mm |
| Brake Disc Thickness | 22 mm |
| Thickness | 46 mm |
| Outer diameter | 283 mm |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.24
Important compatibility info
| Spanner Size | 24 |
| Type | Oil sump |
| Function | Oil sump |
| Weight | 1.364 kg |
| External Thread Size | M16 |
| Extra Description | febi Plus |
| Length | 390 mm |
| Additional Information | without oil drain plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.24
Important compatibility info
| Number of Connectors / Ports | 3 |
| Ignition Coil | 4 Spark |
| Function | Ignition Coil |
| Weight | 0.9 kg |
| Type | Ignition Coil |
| for OE number | 7648797 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.24
Important compatibility info
| Weight | 0.157 kg |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.24
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 134 |
| Function | Timing Chain |
| Weight | 0.556 kg |
| Timing Chain Size | G68WN, G68V |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.24
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, manual transmission |
| Function | Mounting, manual transmission |
| Weight | 1.475 kg |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.22
Important compatibility info
| Weight | 1.530 kg |
| Type | Repair Kit, suspension strut support mount |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with ball bearing, with fastening material |
| Function | Repair Kit, suspension strut support mount |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (105831)
- 1x Febi Nut, stabiliser bar (175043)
- 3x Febi Nut (177338)
- 1x Febi Rolling Bearing, suspension strut support mount (109699)
£50.21
Important compatibility info
| Weight | 0.401 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 070 253 115 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.21
Important compatibility info
| Placement on Vehicle | Exhaust Manifold |
| Number of Connectors / Ports | 2 |
| Weight | 0.039 kg |
| Cable Length | 180 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.21
Important compatibility info
| Weight | 0.18 kg |
| Extra Description | febi Plus |
| Function | Pressure Converter, exhaust control |
| for OE number | 1618.42 |
| Type | Pressure Converter, exhaust control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.20
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 18 mm |
| Weight | 2.683 kg |
| Steering arm type | Control Arm |
| Paired article numbers | 175305 |
| Additional Information 2 | with ball joint |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left, Upper |
| External Thread Size | M14 x 1,5 |
| Additional Information | with crown nut and split pin, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.20
Important compatibility info
| Length | 61.5 mm |
| Spanner Size | 22 |
| Opening Pressure | 4.2 bar |
| Function | Overflow Valve |
| Internal Thread Size | M10 x 1,5 |
| External Thread Size | M16 x 1,5 |
| Weight | 0.119 kg |
| Type | Overflow Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.20
Important compatibility info
| Weight | 9.120 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 300 mm |
| Thickness | 28 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 25 mm |
| Bolt Hole Circle Diameter | 111.5 mm |
| Surface | Coated |
| Function | Brake Disc |
| Internal Thread Size | M10 x 1,5 |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.20
Important compatibility info
| Weight | 0.07 kg |
| External Thread Size | M14 x 1,5 |
| Function | Sensor, exhaust gas temperature |
| Cable Length | 1171 mm |
| Number of Connectors / Ports | 2 |
| Spanner Size | 17 |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.19
Important compatibility info
| Placement on Vehicle | before catalytic converter |
| Number of Connectors / Ports | 2 |
| Weight | 0.067 kg |
| Cable Length | 660 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.19
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023