Important compatibility info
Thread Measurement 2 | M12X1.75 |
Thread Size | M12X1.75 |
Length | 286 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Paired article numbers | FDL7062 |
Placement on Vehicle | Front Axle Right |
Important compatibility info
Height | 65 mm |
Outer diameter | 16 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Length | 142 mm |
Type | Mounting, engine |
Placement on Vehicle | Rear, transmission sided |
Important compatibility info
Centering Diameter | 69 mm |
Minimum thickness | 20.0 mm |
Outer diameter | 280 mm |
Number of Holes | 5 |
Function | Brake Disc |
Rotor Style | Vented |
Placement on Vehicle | Front Axle |
Surface | Coated |
Type | Brake Disc Rotor |
Height | 44.8 mm |
Brake Disc Thickness | 22 mm |
Quantity Unit | Set |
Replaced by | BBD5576 |
Number of mounting bores | 2 |
Important compatibility info
Height | 167 mm |
Outer diameter | 142 mm |
Inner diameter | 97 mm |
Shape/Form | Oval |
Width 1 | 68 mm |
Width 2 | 113 mm |
Function | Air Filter |
Type | Air Filter |
Filter type | Filter Insert |
Important compatibility info
Function | Accessory Kit, disc brake pad |
Placement on Vehicle | Rear Axle |
Type | Accessory Kit, disc brake pad |
Important compatibility info
Length | 418 mm |
Height | 33 mm |
Width | 188 mm |
Function | Air Filter |
Additional Information 2 | for dusty operating conditions |
Type | Air Filter |
Filter type | Filter Insert |
Important compatibility info
Bearing Code | Gen 3 |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Outer diameter 1 | 152 mm |
Width 1 | 65 mm |
Outer diameter 2 | 87 mm |
Placement on Vehicle | Rear Axle |
Important compatibility info
Height | 144 mm |
Outer diameter | 94 mm |
Thread Size | M22X1.5 |
Filter type | Spin-on Filter |
Function | Oil Filter |
Type | Oil Filter |
Important compatibility info
Thread Size | 24 |
Length | 211 mm |
Function | Joint Kit, drive shaft |
External Teeth, Diff.Side | 24 |
Seal Diameter | 35 mm |
Int. teeth, diff.side, conn.to transm. | 24 |
Placement on Vehicle | Front Axle Right, transmission sided |
Type | Joint Kit, drive shaft |
Important compatibility info
Placement on Vehicle | Front Axle Right |
External Teeth, Diff.Side | 26 |
External Teeth, Wheel Side | 38 |
Type | Drive Shaft |
Function | Drive Shaft |
Length | 858 mm |
Important compatibility info
Component Number | FKB1 |
Length 1 | 311 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Placement on Vehicle | Front |
Important compatibility info
External Teeth, Wheel Side | 29 |
External Teeth, Diff.Side | 26 |
Placement on Vehicle | Front Axle Left |
Type | Drive Shaft |
Function | Drive Shaft |
Length | 692 mm |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1263)
Important compatibility info
Length 1 | 1784 mm |
Function | Cable Pull, parking brake |
Placement on Vehicle | Right Rear |
Type | Cable Pull, parking brake |
Important compatibility info
Paired article numbers | FTR6241 |
Thread Type | with right-hand thread |
Placement on Vehicle | Front Axle Left |
Function | Tie Rod End |
Type | Tie Rod End |
Length | 186 mm |
Thread Measurement 2 | M16x1.5 |
Thread Size | M12x1.25 |
Important compatibility info
Length 1 | 333 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Placement on Vehicle | Front |
Important compatibility info
Placement on Vehicle | Front |
Function | Cable Pull, parking brake |
Length 3 | 1780 mm |
Type | Cable Pull, parking brake |
Length 4 | 1645 mm |
Length 1 | 1780 mm |
Length 2 | 1645 mm |
Important compatibility info
Length 2 | 994 mm |
Length 1 | 1315 mm |
Number of Gears | for reverse gear |
Function | Cable Pull, manual transmission |
Type | Cable Pull, manual transmission |
Important compatibility info
Placement on Vehicle | Rear Axle, Left, Right |
Inner diameter | 14 mm |
Function | Repair Kit, stabiliser coupling rod |
Type | Repair Kit, stabiliser coupling rod |
Important compatibility info
Placement on Vehicle | Front Axle |
Rotor Style | Vented |
Number of Holes | 5 |
Height | 56.6 mm |
Outer diameter | 320 mm |
Brake Disc Thickness | 28 mm |
Minimum thickness | 26.4 mm |
Centering Diameter | 69 mm |
Quantity | 1 |
Function | Brake Disc |
Type | Brake Disc Rotor |
Surface | Coated |
Number of mounting bores | 2 |
Important compatibility info
Inner diameter | 14.2 mm |
Diameter | 70.2 mm |
Length | 85.4 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Paired article numbers | FSK7488 |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023