Proud to be a UK-based company
Contact us
Important compatibility info
| Width | 39.2 mm |
| Outer diameter | 50.9 mm |
| Inner diameter | 17 mm |
| Number of Ribs | 6 |
| Tightening Torque | 85 Nm |
| Function | Alternator Freewheel Clutch |
| Additional Information 2 | with lid |
| Weight | 0.397 kg |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Placement on Vehicle | Front Axle Left, Rear |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 26138 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 1.59 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing, with ball joint |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Min. Length | 329 mm |
| Weight | 3.710 kg |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Placement on Vehicle | Front Axle Left |
| Pipe Diameter | 51 mm |
| Piston conrod diameter | 22 mm |
| Max. Length | 509 mm |
| External Thread Size | M12 x 1,25 |
| Type | Shock Absorber |
| Mounting bores distance | 60 mm |
| Function | Shock Absorber |
| Shock Absorber Design | Suspension Strut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Type | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
| Paired article numbers | 182761 |
| Weight | 0.164 kg |
| Placement on Vehicle | Exhaust Side |
| Function | Control Valve, camshaft adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Additional Information | with adjuster |
| Weight | 0.43 kg |
| Type | Tailgate Lock |
| Function | Tailgate Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Weight | 0.961 kg |
| Material | Aluminium |
| Function | Oil Cooler, automatic transmission |
| Additional Information | with seal rings |
| Transmission Type | Automatic Transmission |
| Type | Oil Cooler, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Cooler, automatic transmission (100124)
- 2x Febi Seal Ring, oil cooler (lubrication) (100122)
£49.34
Important compatibility info
| Pipe Diameter | 51 mm |
| Shock Absorber System | Twin-Tube |
| Min. Length | 329 mm |
| Max. Length | 509 mm |
| Mounting bores distance | 60 mm |
| Weight | 3.690 kg |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| External Thread Size | M12 x 1,25 |
| Shock Absorber Type | Gas Pressure |
| Placement on Vehicle | Front Axle Right |
| Bore Diameter | 12 mm |
| Piston conrod diameter | 22 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Extra Description | febi Plus |
| Function | Oil Line, charger |
| Weight | 0.340 kg |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Weight | 2.5 kg |
| Placement on Vehicle | Front Axle Right |
| Length | 148 mm |
| Thickness | 121 mm |
| Paired article numbers | 39874 |
| Rod/Strut | Coupling Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 32 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Number of Connectors / Ports | 2 |
| Extra Description | febi Plus |
| Placement on Vehicle | Intake Side |
| Paired article numbers | 182759 |
| Weight | 0.154 kg |
| Type | Control Valve, camshaft adjustment |
| Function | Control Valve, camshaft adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| for OE number | 11 27 7 500 502 S2 |
| Function | Chain Kit, oil pump drive |
| Timing Chain Size | G53HP |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 52 |
| Weight | 0.54 kg |
| Type | Chain Kit, oil pump drive |
| Extra Description | Full Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (32545)
- 1x Febi Rail, oil pump drive chain (32424)
- 1x Febi Sprocket, crankshaft (30458)
- 1x Febi Sprocket/Gear, oil pump (47980)
- 1x Febi Nut (47977)
£49.34
Important compatibility info
| Additional Information | with fastening/mounting material |
| Housing material | Aluminium |
| Weight | 0.6 kg |
| Extra Description | ProKit |
| Height | 149 mm |
| Width | 125 mm |
| Rated Power | 22 W |
| Light Design | LED |
| Mounting Type | Fully assembled |
| Cable Length | 280 mm |
| Depth | 60 mm |
| Voltage from | 12 V |
| Light Distribution | Spot illumination |
| Voltage to | 36 V |
| Protection Type (IP Code) | IP6K9K |
| Fulfils ECE norm | R10 |
| Lumen | 2160 lm |
| Temperature range from | -30 °C |
| Temperature range to | 50 °C |
| Function | Worklight |
| Inspection Tag | EMC |
| Type | Worklight |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Placement on Vehicle | before soot particulate filter |
| Cable Length | 601 mm |
| Number of Connectors / Ports | 2 |
| Spanner Size | 17 |
| Weight | 0.07 kg |
| External Thread Size | M14 x 1,5 |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Filter type | Filter Insert |
| Function | Air Filter |
| Inner diameter | 130 mm |
| Height | 420 mm |
| Outer diameter | 240 mm |
| Weight | 3.426 kg |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Parameter | 6PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Weight | 1.626 kg |
| Width | 43 mm |
| Inner diameter | 36 mm |
| Outer diameter | 142 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Seal Material | Rubber |
| Material | Cast Aluminium |
| Additional Information 2 | with seal ring |
| Number of Teeth | 31 |
| Weight | 0.9 kg |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Weight | 2.8 kg |
| Placement on Vehicle | Front Axle, Rear Axle |
| Length | 150 mm |
| Thickness | 121 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Coupling Rod |
| Pipe Diameter | 29 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Weight | 0.8 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Thickness | 107 mm |
| Number of Holes | 6 |
| Function | Stub Axle, axle beam |
| Type | Stub Axle, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Housing Diameter | 18 mm |
| Stroke | 231 mm |
| Eject Force | 420 N |
| Type | Gas Spring, boot/cargo area |
| Weight | 0.2 kg |
| Placement on Vehicle | both sides |
| Length | 604 mm |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 18 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 327 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Function | Joint, propshaft |
| Outer diameter | 53 mm |
| Length | 150 mm |
| Replaces | 23837 |
| Weight | 3.320 kg |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023