Important compatibility info
Weight | 1.13 kg |
Piston conrod diameter | 12 mm |
Function | Shock Absorber, driver cab suspension |
External Thread Size | M12 x 1,75 |
Placement on Vehicle | Front |
Operating Mode | Mechanical |
Shock Absorber Mounting Type | Top pin, Bottom Pin |
Max. Length | 312 mm |
Min. Length | 210 mm |
Pipe Diameter | 40 mm |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.55 kg |
Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
Inner diameter | 12 mm |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with fastening/mounting material |
Material | Cast Steel |
External Thread Size | M14 x 1,5 |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (45989)
- 1x Febi Bolt, control arm (40852)
- 1x Febi Nut (34653)
Important compatibility info
Weight | 1.645 kg |
Placement on Vehicle | Rear Axle |
Function | Gasket Set, wheel hub |
Type | Gasket Set, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Circlip (24757)
- 1x Febi Thrust Washer, external planetary gearbox (21951)
- 1x Febi Ring, wheel hub (22842)
- 1x Febi Sensor Ring, ABS (18612)
- 1x Febi Shaft Seal, wheel hub (24758)
Important compatibility info
Parameter | 6PK |
Type | Belt Pulley, crankshaft |
Function | Belt Pulley, crankshaft |
Weight | 1.626 kg |
Width | 43 mm |
Inner diameter | 36 mm |
Outer diameter | 142 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Control Valve, camshaft adjustment |
Type | Control Valve, camshaft adjustment |
Weight | 0.247 kg |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.130 kg |
Placement on Vehicle | Upper Front Axle, Right |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 02940 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with bearing |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.270 kg |
Material | Aluminium |
Opening Temperature | 92 °C. 107 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Additional Information | with gasket/seal |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Sheet Steel |
Placement on Vehicle | Front Axle Right |
Paired article numbers | 30866 |
Weight | 3.44 kg |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Additional Information 2 | with bearing |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.5 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 117 mm |
Outer diameter | 117 mm |
Thickness | 64 mm |
Inner diameter | 30 mm |
Number of Holes | 4 |
Bolt Hole Circle Diameter | 98 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Joint Kit, drive shaft |
Int. teeth, diff.side, conn.to transm. | 33 |
External Teeth, Diff.Side | 29 |
Weight | 2.215 kg |
Placement on Vehicle | transmission sided, Rear Axle Right, Rear Axle Left |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.85 kg |
Function | Centre Rod Assembly |
Placement on Vehicle | Front Axle |
Length | 505 mm |
Rod/Strut | Push Rod |
Cone Size | 22 mm |
External Thread Size | M18 x 1,5 |
Internal Thread Size | M28 x 1,5 |
Pipe Diameter | 36 mm |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 40 mm |
Outer diameter | 59 mm |
Inner diameter | 17 mm |
Number of Ribs | 5 |
Weight | 0.47 kg |
Type | Alternator Freewheel Clutch |
Function | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 39.2 mm |
Outer diameter | 50.9 mm |
Inner diameter | 17 mm |
Number of Ribs | 6 |
Tightening Torque | 85 Nm |
Function | Alternator Freewheel Clutch |
Additional Information 2 | with lid |
Weight | 0.397 kg |
Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Metal |
Outer diameter | 53 mm |
Diameter 1 | 53 mm |
Weight | 0.345 kg |
Mounting points diameter | 10 mm |
Type | Deflection Pulley/Guide Pulley, timing belt |
Function | Deflection Pulley/Guide Pulley, timing belt |
Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.044 kg |
Placement on Vehicle | Front Axle Right |
Paired article numbers | 170693 |
Number of Connectors / Ports | 2 |
Cable Length | 671 mm |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.373 kg |
Number of mounting bores | 2 |
Type | Central Slave Cylinder, clutch |
Function | Central Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | 29425 |
Material | Cast Steel |
Weight | 4.25 kg |
Placement on Vehicle | Front Axle Left, Lower |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.140 kg |
Placement on Vehicle | Rear Axle Left |
DIN / ISO | 5480 |
Function | Brake Shaft, drum brake |
Paired article numbers | 34357 |
Type | Brake Shaft, drum brake |
Length | 534 mm |
Outer diameter | 98 mm |
Number of Teeth | 26 |
Screw length below head | 486 mm |
Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.50 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 27074 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.537 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm, Triangular Control Arm (CV) |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023