Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 26 mm |
| Weight | 5.442 kg |
| Paired article numbers | 182164 |
| Placement on Vehicle | Front Axle Left |
| Material | Sheet Steel |
| Additional Information 2 | without ball joint |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 1 | 21 mm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.03
Important compatibility info
| Weight | 0.270 kg |
| Material | Aluminium |
| Opening Temperature | 92 °C. 107 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.02
Important compatibility info
| Length | 485 mm |
| Height | 46 mm |
| Width | 323 mm |
| Additional Information | with oil drain plug |
| Additional Information 2 | with bolts/screws, with oil sump gasket |
| Filter type | Screen Filter |
| Weight | 0.584 kg |
| Type | Hydraulic Filter Kit, automatic transmission |
| Function | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.02
Important compatibility info
| Weight | 0.373 kg |
| Number of mounting bores | 2 |
| Type | Central Slave Cylinder, clutch |
| Function | Central Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.01
Important compatibility info
| Additional Information 2 | with fastening material |
| Placement on Vehicle | Rear Axle |
| Length | 131.9 mm |
| Width | 70 mm. 60.2 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Weight | 1.906 kg |
| Thickness/Strength 1 | 18.6 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.01
Important compatibility info
| Weight | 0.44 kg |
| Width | 34 mm |
| Outer diameter | 69 mm |
| Type | Tensioner Pulley, timing belt |
| Function | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.01
Important compatibility info
| Weight | 0.07 kg |
| Spanner Size | 17 |
| Number of Connectors / Ports | 2 |
| Cable Length | 220 mm |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Type | Sensor, exhaust gas temperature |
| Placement on Vehicle | before catalytic converter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.01
Important compatibility info
| Hole Spacing | 152 mm |
| Weight | 3.007 kg |
| Length | 187 mm |
| Outer diameter | 85 mm |
| Thickness | 54 mm. 76 mm |
| Inner diameter | 21 mm |
| Steering arm type | for trailing arm |
| Mounting points diameter | 21 mm |
| Type | Repair Kit, control/trailing arm |
| Function | Repair Kit, control/trailing arm |
| Additional Information 2 | with retaining ring, with spacer disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.00
Important compatibility info
| Weight | 0.159 kg |
| Voltage | 24 V |
| Operating Mode | Electric |
| Number of Connectors / Ports | 16 |
| Rated Power | 21 W |
| Function | Flasher Unit |
| Type | Flasher Unit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.00
Important compatibility info
| Weight | 0.842 kg |
| Bore Diameter | 29 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
| for OE number | 1628218 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.00
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Rated Power | 222 W |
| Weight | 1.5 kg |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.00
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 4 -Hole |
| Weight | 4.17 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 247 mm |
| Brake Disc Thickness | 20 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.98
Important compatibility info
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 29425 |
| Material | Cast Steel |
| Weight | 4.25 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.98
Important compatibility info
| Material | PP (Polypropylene) |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| Weight | 0.602 kg |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.98
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 280 mm |
| Thickness | 44 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 21.8 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 61 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Weight | 7.2 kg |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.98
Important compatibility info
| Weight | 0.458 kg |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 184 |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.98
Important compatibility info
| Weight | 1.502 kg |
| Fill Medium | Brake Fluid |
| Type | Slave Cylinder, clutch |
| Function | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.97
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 300 mm |
| Thickness | 58.3 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Weight | 5.413 kg |
| Rotor Style | Solid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.95
Important compatibility info
| Outer length 1 | 1045 mm |
| Inner length 1 | 789 mm |
| Placement on Vehicle | Left |
| Paired article numbers | 179936 |
| Weight | 0.440 kg |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.93
Important compatibility info
| Outer length 1 | 1205 mm |
| Inner length 1 | 900 mm |
| Placement on Vehicle | Right |
| Paired article numbers | 179913 |
| Weight | 0.460 kg |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.93
Important compatibility info
| Weight | 0.631 kg |
| Placement on Vehicle | Lower |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
| Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.93
Important compatibility info
| Placement on Vehicle | Right |
| Weight | 1.819 kg |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.93
Important compatibility info
| Housing length | 391.5 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 17.8 mm |
| Housing Diameter | 22 mm |
| Eject Force | 670 N |
| Weight | 0.3 kg |
| Length | 627 mm |
| Stroke | 186 mm |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.93
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Weight | 4.3 kg |
| Brake caliper piston diameter | 54 mm |
| Material | Cast Iron |
| Paired article numbers | 185997 |
| Brake Caliper Type | Brake Caliper (1 piston) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.92
Important compatibility info
| Brake caliper piston diameter | 54 mm |
| Paired article numbers | 185996 |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Weight | 4.3 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.92
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.097 kg |
| Cable Length | 505 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Diagnostic Probe |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.92
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178964 |
| Weight | 2.252 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.91
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178965 |
| Weight | 2.252 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.91
Important compatibility info
| Weight | 0.5 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 06F 253 039 E |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.90
Important compatibility info
| Voltage | 12 V |
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 2 |
| Weight | 1.1 kg |
| Function | Interior Blower |
| Rated Power | 200 W |
| Outer diameter | 145 mm |
| Type | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.89
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Rotor Style | Internally Vented |
| Weight | 5.1 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 272 mm |
| Thickness | 40 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 60 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.89
Important compatibility info
| Weight | 0.107 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 42 |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.89
Important compatibility info
| Placement on Vehicle | Left Rear, Right Rear |
| Length | 1952 mm. 1885 mm |
| Weight | 1.8 kg |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.89
Important compatibility info
| Material | Rubber/Metal |
| Number of Holes | 6 |
| Bolt Hole Circle Diameter | 110 mm |
| Weight | 0.723 kg |
| Version | alte Ausführung |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
| Outer diameter | 150 mm |
| Replaced by | 101773 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.89
Important compatibility info
| Mounting bores distance | 561 mm |
| Min. Length | 346 mm |
| Bore Diameter | 14 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Type | Gas Pressure |
| Pipe Diameter | 54 mm. 45 mm |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.750 kg |
| Shock Absorber System | Twin-Tube |
| Type | Shock Absorber |
| Max. Length | 561 mm |
| Function | Shock Absorber |
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.88
Important compatibility info
| Placement on Vehicle | Intake Side |
| Weight | 0.747 kg |
| Type | Rocker Arm, engine timing |
| Function | Rocker Arm, engine timing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.87
Important compatibility info
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | before soot particulate filter |
| Number of Connectors / Ports | 2 |
| Weight | 0.048 kg |
| Cable Length | 414 mm |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.87
Important compatibility info
| Placement on Vehicle | Right |
| Operating Mode | Automatic |
| Paired article numbers | 179205 |
| Type | Adjuster, braking system |
| Weight | 3.449 kg |
| Function | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.86
Important compatibility info
| Weight | 5.12 kg |
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 302 mm |
| Thickness | 50.8 mm |
| Brake Disc Thickness | 11 mm |
| Minimum thickness | 9.5 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.6 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.85
Important compatibility info
| Weight | 5.27 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 257 mm |
| Thickness | 40.5 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20.5 mm |
| Bolt Hole Circle Diameter | 98 mm |
| Centering Diameter | 59 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.85
Important compatibility info
| Weight | 0.86 kg |
| Width of castor bearing surface | 26 mm |
| Outer diameter | 70 mm. 78 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.84
Important compatibility info
| Turbocharger line | Charge air cooler to intake manifold |
| Placement on Vehicle | Charge Air Cooler, Left |
| Inner diameter | 65 mm |
| Function | Charge Air Hose |
| Weight | 0.494 kg |
| Type | Charge Air Hose |
| Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.83
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.098 kg |
| Cable Length | 500 mm |
| Number of circuits | 3 |
| Lambda Sensor | Heated, Regulating Sensor |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.83
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle Left |
| Outer diameter | 350 mm |
| Thickness | 68.5 mm |
| Brake Disc Thickness | 34 mm |
| Minimum thickness | 32 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Centering Diameter | 85 mm |
| Paired article numbers | 26653 |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Weight | 12.740 kg |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
Additional Information
Technical Information
Attention, this is a sided brake disc.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.82
Important compatibility info
| Type | Brake Master Cylinder |
| Function | Brake Master Cylinder |
| Weight | 0.494 kg |
| Piston Diameter | 20.6 mm |
| Material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.82
Important compatibility info
| Function | Timing Chain |
| Type | Timing Chain |
| Weight | 0.394 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 78 |
| Placement on Vehicle | Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.82
Important compatibility info
| Weight | 0.040 kg |
| Number of Connectors / Ports | 3 |
| Function | Sensor, throttle position |
| Type | Sensor, throttle position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.82
Important compatibility info
| Stroke | 191 mm |
| Placement on Vehicle | both sides |
| Type | Gas Spring, boot/cargo area |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Eject Force | 600 N |
| Housing Diameter | 19 mm |
| Weight | 0.2 kg |
| Length | 598 mm |
| Housing length | 329 mm |
| Function | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.82
Important compatibility info
| Brake caliper piston diameter | 48 mm |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Material | Cast Iron |
| Placement on Vehicle | Front Axle Left |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Paired article numbers | 182006 |
| Weight | 4.52 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.82
Important compatibility info
| Weight | 12.780 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle Right |
| Outer diameter | 350 mm |
| Thickness | 68.5 mm |
| Brake Disc Thickness | 34 mm |
| Minimum thickness | 32 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Centering Diameter | 85 mm |
| Paired article numbers | 26649 |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
Technical Information
Attention, this is a sided brake disc.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.82
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023