Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 1.19 kg |
| Width | 25 mm |
| Number of Teeth | 148 |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (11134)
- 1x Febi Tensioner Pulley, timing belt (05889)
£49.48
Important compatibility info
| Type | Adjuster, braking system |
| Function | Adjuster, braking system |
| Weight | 3.321 kg |
| Paired article numbers | 178688 |
| Operating Mode | Automatic |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.48
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 363 mm |
| Weight | 3.81 kg |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Wire Diameter | 14.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.48
Important compatibility info
| Weight | 0.878 kg |
| Placement on Vehicle | Front, both sides |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Replaces | 19456 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.48
Important compatibility info
| Weight | 1.94 kg |
| Type | Brake Caliper |
| Paired article numbers | 181698 |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Brake caliper piston diameter | 48 mm |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.46
Important compatibility info
| Type | Brake Caliper |
| Weight | 1.94 kg |
| Paired article numbers | 181697 |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Brake caliper piston diameter | 48 mm |
| Function | Brake Caliper |
| Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.46
Important compatibility info
| Weight | 0.895 kg |
| Length | 276 mm |
| Outer diameter | 104 mm |
| Voltage | 24 V |
| Function | Interior Blower |
| Type | Interior Blower |
| for OE number | 000 830 93 08 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.46
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178161 |
| Weight | 1.835 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.46
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178159 |
| Weight | 1.835 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.46
Important compatibility info
| Function | Holder, Wheel Chock |
| Depth | 165 mm |
| Colour | Black |
| Width | 314 mm |
| Type | Holder, Wheel Chock |
| Material | Sheet Steel |
| Extra Description | febi Plus |
| Height | 235 mm |
| Weight | 1.604 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.45
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Paired article numbers | 177838 |
| Weight | 3.5 kg |
| Additional Information 2 | with ball joint, with rubber mount |
| Steering arm type | Triangular Control Arm (CV), Control Arm |
| Cone Size | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.44
Important compatibility info
| Function | Valve, crankcase ventilation |
| Type | Valve, crankcase ventilation |
| Material | Plastic, Rubber |
| Weight | 0.265 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.44
Important compatibility info
| Weight | 0.68 kg |
| Number of Ribs | 5 |
| Function | Alternator Freewheel Clutch |
| Inner diameter | 15 mm |
| Outer diameter | 59 mm |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.43
Important compatibility info
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 258 mm |
| Thickness | 46.1 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 55.1 mm |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Surface | Coated |
| Weight | 4.910 kg |
| Rim Hole Number | 4 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.43
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Weight | 12.930 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 350 mm |
| Thickness | 48 mm |
| Brake Disc Thickness | 32 mm |
| Minimum thickness | 30 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.5 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.42
Important compatibility info
| Weight | 5.6 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 258 mm |
| Thickness | 44 mm |
| Brake Disc Thickness | 23 mm |
| Minimum thickness | 21 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 55 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.40
Important compatibility info
| Outer diameter | 55 mm |
| Inner diameter | 17 mm |
| Number of Ribs | 6 |
| Function | Alternator Freewheel Clutch |
| Additional Information 2 | with lid |
| Weight | 0.386 kg |
| Type | Alternator Freewheel Clutch |
| for OE number | 611 155 02 15 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.40
Important compatibility info
| Rotor Style | Solid |
| Minimum thickness | 10.5 mm |
| Outer diameter | 291 mm |
| Thickness | 68.5 mm |
| Brake Disc Thickness | 12 mm |
| Inner diameter | 190 mm |
| Function | Brake Disc |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Weight | 5.85 kg |
| Placement on Vehicle | Rear Axle |
| Max.skimmed drum measure | 191 mm |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.40
Important compatibility info
| Weight | 6.76 kg |
| External Thread Size | M22 x 1,5 |
| Placement on Vehicle | Left |
| Paired article numbers | 10480 |
| Type | Brake Shaft, drum brake |
| Function | Brake Shaft, drum brake |
| Length | 682 mm |
| Outer diameter | 66 mm |
| Number of Teeth | 10 |
| Screw length below head | 618 mm |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.39
Important compatibility info
| Length | 682 mm |
| External Thread Size | M22 x 1,5 |
| Function | Brake Shaft, drum brake |
| Screw length below head | 618 mm |
| Type | Brake Shaft, drum brake |
| Paired article numbers | 10479 |
| Number of Teeth | 10 |
| Outer diameter | 66 mm |
| Placement on Vehicle | Right |
| Weight | 6.76 kg |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.39
Important compatibility info
| Placement on Vehicle | Left |
| Weight | 1.238 kg |
| Material | Aluminium |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.39
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.105 kg |
| Cable Length | 540 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.39
Important compatibility info
| Type | Repair Kit, kingpin |
| Additional Information 2 | without bearing |
| Weight | 3.986 kg |
| Outer diameter | 50 mm |
| Function | Repair Kit, kingpin |
| Length | 222.5 mm |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (35012)
- 2x Febi Lock Ring, steering knuckle (35014)
- 4x Febi Bush, steering knuckle (08524)
- 2x Febi Circlip (05370)
- 2x Febi Seal Ring, steering knuckle (05868)
£49.38
Important compatibility info
| Additional Information | with rubber-metal mounts |
| Material | Sheet Steel |
| Placement on Vehicle | Upper, Rear Axle Right |
| Paired article numbers | 184817 |
| Weight | 1.141 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.36
Important compatibility info
| Length | 134 mm |
| External Thread Size | M10 x 1 |
| Function | Glow Plug |
| Voltage | 5.4 V |
| Spanner Size | 10 |
| Weight | 0.035 kg |
| Glow Plug Type | Metal glow plug |
| Type | Glow Plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.36
Important compatibility info
| Length | 212 mm |
| Additional Information 2 | with oil sump gasket |
| Type | Hydraulic Filter Kit, automatic transmission |
| Weight | 0.19 kg |
| Height | 76 mm |
| Width | 105 mm |
| Filter type | Screen Filter |
| Function | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.35
Important compatibility info
| Weight | 0.580 kg |
| Width | 14 mm |
| Material | NBR (nitrile butadiene rubber) |
| Thickness | 18 mm |
| Function | Gasket, oil sump |
| Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.35
Important compatibility info
| Additional Information | with fastening/mounting material, with pipes |
| Weight | 0.4 kg |
| Type | Heat Exchanger, interior heating |
| Function | Heat Exchanger, interior heating |
| Core Length | 211 mm |
| Core Width | 84 mm |
| Core Depth | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Min. Length | 329 mm |
| Weight | 3.710 kg |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Placement on Vehicle | Front Axle Left |
| Pipe Diameter | 51 mm |
| Piston conrod diameter | 22 mm |
| Max. Length | 509 mm |
| External Thread Size | M12 x 1,25 |
| Type | Shock Absorber |
| Mounting bores distance | 60 mm |
| Function | Shock Absorber |
| Shock Absorber Design | Suspension Strut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Screw length below head | 610 mm |
| Function | Brake Shaft, drum brake |
| Type | Brake Shaft, drum brake |
| Paired article numbers | 174145 |
| Number of Teeth | 10 |
| Length | 655 mm |
| Placement on Vehicle | Left |
| Weight | 6.58 kg |
| Outer diameter | 85 mm |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Extra Description | febi Plus |
| Function | Oil Line, charger |
| Weight | 0.340 kg |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Length | 143 mm |
| Outer diameter | 75 mm |
| Internal Teeth, wheel side | 28 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| External Thread Size | M18 x 1,5 |
| Weight | 1.79 kg |
| Seal Diameter | 49 mm |
| External Teeth, Wheel Side | 25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Pipe Diameter | 51 mm |
| Shock Absorber System | Twin-Tube |
| Min. Length | 329 mm |
| Max. Length | 509 mm |
| Mounting bores distance | 60 mm |
| Weight | 3.690 kg |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| External Thread Size | M12 x 1,25 |
| Shock Absorber Type | Gas Pressure |
| Placement on Vehicle | Front Axle Right |
| Bore Diameter | 12 mm |
| Piston conrod diameter | 22 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 80.3 mm |
| Outer diameter | 314.4 mm |
| Thickness | 105 mm |
| Inner diameter | 280 mm |
| Bolt Hole Circle Diameter | 160 mm |
| Centering Diameter | 118 mm |
| Weight | 12.35 kg |
| Max.skimmed drum measure | 282 mm |
| Rim Hole Number | 5 -Hole |
| Type | Brake Drum |
| Function | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Additional Information | with adjuster |
| Weight | 0.43 kg |
| Type | Tailgate Lock |
| Function | Tailgate Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Placement on Vehicle | Right |
| Brake Shaft Cam | S-cam |
| Screw length below head | 610 mm |
| Function | Brake Shaft, drum brake |
| Type | Brake Shaft, drum brake |
| Paired article numbers | 174144 |
| Number of Teeth | 10 |
| Outer diameter | 85 mm |
| Length | 655 mm |
| Weight | 6.58 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Weight | 0.961 kg |
| Material | Aluminium |
| Function | Oil Cooler, automatic transmission |
| Additional Information | with seal rings |
| Transmission Type | Automatic Transmission |
| Type | Oil Cooler, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Cooler, automatic transmission (100124)
- 2x Febi Seal Ring, oil cooler (lubrication) (100122)
£49.34
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Weight | 6.140 kg |
| Paired article numbers | 34358 |
| DIN / ISO | 5480 |
| Function | Brake Shaft, drum brake |
| Type | Brake Shaft, drum brake |
| Length | 534 mm |
| Outer diameter | 98 mm |
| Number of Teeth | 26 |
| Screw length below head | 486 mm |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Function | Joint, propshaft |
| Outer diameter | 53 mm |
| Length | 150 mm |
| Replaces | 23837 |
| Weight | 3.320 kg |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 355 mm |
| Weight | 4.3 kg |
| Rod/Strut | Coupling Rod |
| Thickness | 119 mm |
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Width | 40 mm |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Width | 39.2 mm |
| Outer diameter | 50.9 mm |
| Inner diameter | 17 mm |
| Number of Ribs | 6 |
| Tightening Torque | 85 Nm |
| Function | Alternator Freewheel Clutch |
| Additional Information 2 | with lid |
| Weight | 0.397 kg |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 343 mm |
| Weight | 0.2 kg |
| Housing Diameter | 18 mm |
| Eject Force | 330 N |
| Stroke | 117 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, bonnet |
| Function | Gas Spring, bonnet |
| Housing length | 139.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Parameter | 6PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Weight | 1.626 kg |
| Width | 43 mm |
| Inner diameter | 36 mm |
| Outer diameter | 142 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Weight | 6.140 kg |
| Placement on Vehicle | Rear Axle Left |
| DIN / ISO | 5480 |
| Function | Brake Shaft, drum brake |
| Paired article numbers | 34357 |
| Type | Brake Shaft, drum brake |
| Length | 534 mm |
| Outer diameter | 98 mm |
| Number of Teeth | 26 |
| Screw length below head | 486 mm |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Weight | 0.8 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Thickness | 107 mm |
| Number of Holes | 6 |
| Function | Stub Axle, axle beam |
| Type | Stub Axle, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Weight | 0.506 kg |
| External Thread Size | M10 x 1,5, M12 x 1,5 |
| Inner diameter | 8 mm |
| Housing Diameter | 55 mm |
| Function | Slave Cylinder, engine brake |
| Pressure side external thread size | M12 x 1,5 |
| Housing length | 150 mm |
| Type | Slave Cylinder, engine brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| External Thread Size | M16 x 1,5 |
| for OE number | 21634017 |
| Weight | 0.055 kg |
| Spanner Size | 27 |
| Type | Sensor, oil pressure |
| Function | Sensor, oil pressure |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 5 |
| Function | EGR Valve |
| Weight | 0.77 kg |
| Additional Information | with gasket/seal |
| Type | EGR Valve |
| for OE number | 08 51 038 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Placement on Vehicle | Left |
| Material | PP (Polypropylene) |
| Outer diameter | 81.5 mm |
| Inner diameter | 78.5 mm |
| Weight | 0.287 kg |
| Type | Intake Hose, air filter |
| Hose Length | 220 mm |
| Wall Thickness | 3 mm |
| Function | Intake Hose, air filter |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 21513 |
| Placement on Vehicle | Lower Front Axle, Right |
| Weight | 1.162 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing, with ball joint |
| Replaces | 32993 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023