Important compatibility info
Placement on Vehicle | Rear |
Weight | 0.780 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | GJ6A-39-040B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Thermostat, coolant |
Weight | 0.4 kg |
Type | Thermostat, coolant |
Seal Material | PTFE (polytetrafluoroethylene) |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (46333)
- 1x Febi Seal, thermostat (47288)
Important compatibility info
Bolt Hole Circle Diameter | 9 mm |
Function | Door Lock |
Weight | 0.250 kg |
Placement on Vehicle | Left Front |
Length | 80 mm |
Width | 52 mm |
Thickness | 21 mm |
Type | Door Lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 16100-29125 |
Material | Cast Aluminium |
Number of Wings | 6 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Weight | 0.720 kg |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Number of mounting bores | 5 |
Seal Material | Paper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with bolts/screws |
Function | Sealing Set, air compressor |
Weight | 1.0 kg |
Type | Sealing Set, air compressor |
Number of screws | 8 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.192 kg |
Material | Plastic |
Outer diameter | 65 mm |
Number of Ribs | 7 |
Function | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 30 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rod/Strut | Push Rod |
Thread Size | M20 x 1,5, M24 x 1,5 |
Pipe Diameter | 38 mm |
Additional Information 2 | with crown nut |
Placement on Vehicle | Front Axle |
Adjustable | Adjustable on one side |
Cone Size | 26 mm. 30 mm |
Weight | 4.650 kg |
Extra Description | ProKit |
Function | Centre Rod Assembly |
Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.209 kg |
Placement on Vehicle | Intake Side |
Extra Description | febi Plus |
Type | Control Valve, camshaft adjustment |
Function | Control Valve, camshaft adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.500 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 12957 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts, with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 5 -Hole |
Weight | 5.350 kg |
Rotor Style | Internally Vented |
Placement on Vehicle | Front Axle |
Outer diameter | 255 mm |
Thickness | 50.3 mm |
Brake Disc Thickness | 25.3 mm |
Minimum thickness | 23 mm |
Bolt Hole Circle Diameter | 100 mm |
Centering Diameter | 55 mm |
Surface | Coated |
Number of mounting bores | 2 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.210 kg |
Operating Mode | Electric-pneumatic |
Number of Connectors / Ports | 2 |
Type | Pressure Converter |
Function | Pressure Converter |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.295 kg |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Right, Lower |
Paired article numbers | 09530 |
Steering arm type | Control Arm |
Material | Sheet Steel |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (07847)
- 1x Febi Mounting, control/trailing arm (07856)
Important compatibility info
Weight | 2.538 kg |
Placement on Vehicle | Front Axle Right, Lower |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 48180 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 126 mm |
Outer diameter | 48 mm |
Weight | 2.462 kg |
Function | Joint, propshaft |
Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower Front Axle, Left |
Steering arm type | Control Arm |
Material | Cast Steel |
Paired article numbers | 18501 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 2.805 kg |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pipe Diameter | 45 mm |
Min. Length | 249 mm |
Piston conrod diameter | 13 mm |
Max. Length | 355 mm |
Function | Shock Absorber, driver cab suspension |
Placement on Vehicle | Front |
Operating Mode | Mechanical |
Weight | 1.34 kg |
Shock Absorber Mounting Type | Top pin, Bottom eye |
External Thread Size | M12 x 1,25 |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with quick couplers |
Type | Radiator Hose |
Cooling Hose | from engine to water pump |
Weight | 0.29 kg |
Material | Plastic |
Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.131 kg |
Function | Clutch Release Bearing |
Type | Clutch Release Bearing |
Additional Information 2 | with guide sleeve |
for OE number | 02T 141 170 C |
Important compatibility info
Weight | 0.446 kg |
Placement on Vehicle | Upper Left |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Function | Radiator Hose |
Cooling Hose | from engine to engine cooler |
Type | Radiator Hose |
Hose Length | 310 mm |
Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.767 kg |
Placement on Vehicle | Front Axle Right, Lower |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 18503 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023