Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 1.510 kg |
| Outer diameter 1 | 131 mm |
| Outer diameter 2 | 39 mm |
| External Thread Size | M12 x 1,5 |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | with wheel studs, without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.19
Important compatibility info
| Function | Hydraulic Filter, multi-plate clutch (all-wheel drive) |
| Extra Description | febi Plus |
| Type | Hydraulic Filter, multi-plate clutch (all-wheel drive) |
| Weight | 0.06 kg |
| Outer diameter | 35.5 mm |
| Additional Information | for multi-plate clutch, with gasket/seal |
| Height | 55 mm |
| Clutch ID | Haldex Gen IV |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.18
Important compatibility info
| Width | 86 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Weight | 4.04 kg |
| Length | 180 mm |
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 20 mm |
| Placement on Vehicle | Front Axle |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.18
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 173557 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1690 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Weight | 0.068 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.18
Important compatibility info
| Weight | 6.04 kg |
| Outer diameter | 285 mm |
| Thickness | 55.5 mm |
| Placement on Vehicle | Rear Axle |
| Minimum thickness | 13 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Brake Disc Thickness | 15 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.18
Important compatibility info
| Weight | 0.054 kg |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 170681 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1664 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.17
Important compatibility info
| Function | Cable Repair Kit, tailgate |
| Additional Information | with squeeze connector |
| Placement on Vehicle | Left |
| Additional Information 2 | with bellow |
| Cable Length | 300 mm |
| Number of circuits | 10 |
| Extra Description | febi Plus |
| Type | Cable Repair Kit, tailgate |
| Weight | 0.102 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.17
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.106 kg |
| Cable Length | 570 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.17
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 276 mm |
| Thickness | 76 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 19 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Centering Diameter | 85 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Mounting points diameter | 15 mm |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
| Weight | 7.0 kg |
| Replaces | 22857 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.16
Important compatibility info
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Weight | 4.5 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 280 mm |
| Thickness | 37.1 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 9 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.6 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.16
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 24.6 mm |
| Outer diameter | 121.5 mm |
| Inner diameter | 77.7 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing |
| Weight | 0.9 kg |
| Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.16
Important compatibility info
| Weight | 1.106 kg |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Left Front, Right Front |
| Type | Mounting, engine |
| Replaces | 05302; 05863; 05864; 05865 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.16
Important compatibility info
| Width | 27 mm |
| Material | Metal |
| Outer diameter | 72 mm |
| Inner diameter | 10.5 mm |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Weight | 0.35 kg |
| Type | Deflection Pulley/Guide Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.15
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.086 kg |
| Cable Length | 355 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Diagnostic Probe |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.15
Important compatibility info
| Weight | 6.75 kg |
| Brake Disc Thickness | 23 mm |
| Minimum thickness | 21 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 278 mm |
| Thickness | 43.9 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.5 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rim Hole Number | 4 -Hole |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.14
Important compatibility info
| Operating Pressure | 10 bar |
| Weight | 0.4 kg |
| Type | Multiport Valve |
| Function | Multiport Valve |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.14
Important compatibility info
| Extra Description | febi Plus |
| Function | Control Valve, camshaft adjustment |
| Type | Control Valve, camshaft adjustment |
| Placement on Vehicle | Intake Side |
| Weight | 0.182 kg |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.14
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 3.086 kg |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 181029 |
| Additional Information | with rubber-metal mounts |
| Placement on Vehicle | Front Axle Right, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.13
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Rubber/Metal |
| Function | Bushing, axle beam |
| Outer diameter | 80 mm |
| Thickness | 89 mm |
| Paired article numbers | 22984 |
| Weight | 0.701 kg |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.13
Important compatibility info
| Weight | 0.063 kg |
| Type | Sensor, boost pressure |
| Function | Sensor, boost pressure |
| External Thread Size | M14 x 1,5 |
| Number of Connectors / Ports | 4 |
| Spanner Size | 27 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.13
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 181181 |
| Material | Cast Iron |
| Weight | 3.750 kg |
| Type | Brake Caliper |
| Brake caliper piston diameter | 57 mm |
| Function | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.13
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 181180 |
| Weight | 3.750 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.13
Important compatibility info
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Bearing Type | Angular Ball Bearing |
| Weight | 2.180 kg |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Inner diameter | 30 mm |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 67 mm |
| Outer diameter | 68 mm |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.12
Important compatibility info
| Weight | 0.034 kg |
| Material | Rubber |
| Function | Gasket, oil sump |
| Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.11
Important compatibility info
| Weight | 1.290 kg |
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 11610-63J10 |
| Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.11
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 176755 |
| Weight | 1.659 kg |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.10
Important compatibility info
| Paired article numbers | 176754 |
| Type | Splash Guard, brake disc |
| Placement on Vehicle | Rear Axle Right |
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
| Weight | 1.659 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.10
Important compatibility info
| Weight | 0.190 kg |
| Number of Connectors / Ports | 3 |
| Type | Ignition Coil |
| Function | Ignition Coil |
| for OE number | ZJ20-18-100A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.09
Important compatibility info
| Steering arm type | Control Arm |
| Additional Information | with rubber mounts |
| Cone Size 2 | 22 mm |
| Placement on Vehicle | Front Axle Left |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Paired article numbers | 183804 |
| Weight | 3.047 kg |
| Cone Size | 17 mm |
| External Thread Size | M12 x 1,25 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.09
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 136 mm |
| Outer diameter | 136 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Weight | 3.340 kg |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with screw set, with ABS sensor ring |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.09
Important compatibility info
| Internal Thread Size | M22 x 1,5 |
| External Thread Size | M8 x 1,25 |
| Weight | 0.669 kg |
| Function | Multi-circuit Protection Valve |
| Type | Multi-circuit Protection Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.08
Important compatibility info
| Rotor Style | Solid |
| Function | Brake Disc |
| Outer diameter | 295 mm |
| Weight | 4.985 kg |
| Placement on Vehicle | Rear Axle |
| Thickness | 72 mm |
| Brake Disc Thickness | 9.6 mm |
| Minimum thickness | 8.4 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.07
Important compatibility info
| Placement on Vehicle | Outer |
| Number of Connectors / Ports | 2 |
| Weight | 0.010 kg |
| Type | Sensor, exterior temperature |
| Function | Sensor, exterior temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.07
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Material | Cast Iron |
| Paired article numbers | 183262 |
| Weight | 4.95 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 48 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.07
Important compatibility info
| Weight | 6.0 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 270 mm |
| Thickness | 46 mm |
| Brake Disc Thickness | 22 mm |
| Inner diameter | 125 mm |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 55 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.07
Important compatibility info
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| Weight | 1.13 kg |
| Seal Material | Metal |
| Number of Wings | 9 |
| Water pump impeller material | Plastic |
| Material | Cast Aluminium |
| Additional Information 2 | with bolts/screws |
| Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.07
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 294 mm |
| Thickness | 55 mm |
| Brake Disc Thickness | 19 mm |
| Minimum thickness | 17.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Weight | 5.966 kg |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.07
Important compatibility info
| Function | Mounting, radiator |
| Type | Mounting, radiator |
| Placement on Vehicle | Left |
| Weight | 0.591 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.07
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.099 kg |
| Cable Length | 628 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.05
Important compatibility info
| Function | Slave Cylinder, clutch |
| Weight | 0.19 kg |
| Type | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.05
Important compatibility info
| Material | Aluminium |
| Function | Brake Master Cylinder |
| Weight | 0.515 kg |
| Type | Brake Master Cylinder |
| Piston Diameter | 23.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.04
Important compatibility info
| Weight | 0.485 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 5849907 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.04
Important compatibility info
| Outer diameter | 59 mm |
| Type | Tensioner Pulley, timing belt |
| Width | 26 mm |
| Weight | 0.328 kg |
| Function | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.03
Important compatibility info
| Weight | 0.07 kg |
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Cable Length | 325 mm |
| for OE number | 08 55 432 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.03
Important compatibility info
| Additional Information 2 | with lid |
| Outer diameter | 59 mm |
| Inner diameter | 17 mm |
| Number of Ribs | 7 |
| Function | Alternator Freewheel Clutch |
| Weight | 0.54 kg |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.02
Important compatibility info
| Weight | 5.67 kg |
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 288 mm |
| Thickness | 64.7 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 5 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.02
Important compatibility info
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 276 mm |
| Thickness | 45 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 22.4 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 87 mm |
| Surface | Coated |
| Number of mounting bores | 4 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Weight | 6.170 kg |
| Rim Hole Number | 6 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.02
Important compatibility info
| Number of Ribs | 5 |
| Width | 25 mm |
| Inner diameter | 44 mm |
| Weight | 1.26 kg |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Additional Information 2 | with bolts/screws |
| for OE number | 0515.R8 S1 |
| Outer diameter | 148 mm |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (36311)
- 3x Febi Pulley Bolt (33757)
£46.00
Important compatibility info
| Inner diameter | 30 mm |
| Outer diameter | 162 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Width | 37 mm |
| Additional Information 2 | with screw |
| Weight | 2.47 kg |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (24628)
- 1x Febi Pulley Bolt (33675)
£46.00
Important compatibility info
| Weight | 1.92 kg |
| Function | Seal, windscreen |
| Type | Seal, windscreen |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.99
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023