Important compatibility info
Spanner Size | 22 |
Weight | 0.086 kg |
Cable Length | 460 mm |
Number of circuits | 4 |
Lambda Sensor | Heated |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
for OE number | 226A0-JA10C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.6 kg |
Bolt Hole Circle Diameter | 124 mm |
Function | Clutch, radiator fan |
Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.715 kg |
External Thread Size | M12 x 1,5 |
Placement on Vehicle | Front |
Operating Mode | Mechanical |
Shock Absorber Mounting Type | Top pin, Bottom eye |
Max. Length | 326 mm |
Min. Length | 218 mm |
Pipe Diameter | 50 mm. 41 mm |
Mounting points diameter | 20 mm |
Piston conrod diameter | 12 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Ball Head, gearshift linkage |
Thread Type | with right-hand thread |
Weight | 0.255 kg |
Type | Ball Head, gearshift linkage |
External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.4 kg |
Function | Shock Absorber, driver cab suspension |
Type | Shock Absorber, driver cab suspension |
Piston conrod diameter | 12.5 mm |
Mounting points diameter | 12 mm |
Min. Length | 228 mm |
Max. Length | 310 mm |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Operating Mode | Mechanical |
Placement on Vehicle | Rear |
Pipe Diameter | 40 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Window Regulator |
Type | Window Regulator |
Weight | 0.907 kg |
Paired article numbers | 177106 |
Operating Mode | Electric |
Additional Information | without electric motor |
Placement on Vehicle | Left Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, wheel speed |
Cable Length | 1200 mm |
Number of Connectors / Ports | 4 |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Type | Sensor, wheel speed |
Weight | 0.175 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 30426 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 3.83 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Cooler, engine oil |
Weight | 1.119 kg |
Number of Ribs | 20 |
Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Charge Air Hose |
Material | ACM (Polyacrylate) |
Weight | 0.56 kg |
Additional Information 2 | with quick couplers |
Turbocharger line | Piping to charge air cooler |
Type | Charge Air Hose |
Placement on Vehicle | Charge Air Cooler, Upper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side |
Length | 141 mm |
Outer diameter | 73 mm |
External Teeth, Wheel Side | 26 |
Seal Diameter | 55.6 mm |
Internal Teeth, wheel side | 19 |
Weight | 1.660 kg |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with rubber mounts, with holder |
Weight | 3.705 kg |
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 39359 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer length 1 | 1045 mm |
Inner length 1 | 789 mm |
Placement on Vehicle | Left |
Paired article numbers | 179936 |
Weight | 0.440 kg |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Combi Switch Function | Window Regulator |
Number of Connectors / Ports | 5 |
Placement on Vehicle | Passenger Side |
Type | Multi-Function Switch |
Function | Multi-Function Switch |
Weight | 0.073 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Weight | 0.289 kg |
Number of Connectors / Ports | 2 |
Cooling Hose | from engine to thermostat |
Function | Radiator Hose |
Type | Radiator Hose |
Additional Information 2 | with sensor, with flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.714 kg |
Outer diameter | 460 mm |
Number of Wings | 11 |
Function | Fan Wheel, engine cooling |
Type | Fan Wheel, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with temperature sensor, with gasket/seal |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Weight | 0.190 kg |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.460 kg |
Type | Expansion Tank, coolant |
Function | Expansion Tank, coolant |
for OE number | 50515057 SK |
Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing Diameter | 18 mm |
Eject Force | 280 N |
Stroke | 104 mm |
Weight | 0.175 kg |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Placement on Vehicle | both sides |
Housing length | 169.5 mm |
Length | 298 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Repair Kit, adjuster |
Weight | 0.540 kg |
Type | Repair Kit, adjuster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023