Important compatibility info
Weight | 4.085 kg |
Height | 464 mm |
Outer diameter | 309 mm |
Inner diameter | 180 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.67 kg |
Additional Information 2 | with screw |
Width | 25 mm |
Outer diameter | 153 mm |
Inner diameter | 30 mm |
Number of Ribs | 5 |
Parameter | 6PK |
Type | Belt Pulley, crankshaft |
Function | Belt Pulley, crankshaft |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (32114)
- 1x Febi Pulley Bolt (33675)
Important compatibility info
Outer length 1 | 1205 mm |
Inner length 1 | 900 mm |
Placement on Vehicle | Right |
Paired article numbers | 179913 |
Weight | 0.460 kg |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 363 mm |
Function | Suspension Spring |
Wire Diameter | 12.3 mm |
Weight | 2.07 kg |
Type | Suspension Spring |
Outer diameter | 144 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.4 kg |
Function | Shock Absorber, driver cab suspension |
Type | Shock Absorber, driver cab suspension |
Piston conrod diameter | 12.5 mm |
Mounting points diameter | 12 mm |
Min. Length | 228 mm |
Max. Length | 310 mm |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Operating Mode | Mechanical |
Placement on Vehicle | Rear |
Pipe Diameter | 40 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Weight | 3.28 kg |
Length | 4910 mm |
Outer diameter | 8.5 mm |
Inner diameter | 4.2 mm |
Pressure | 400 bar |
Function | Hose Line, driver cab tilting device |
Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side |
Length | 141 mm |
Outer diameter | 73 mm |
External Teeth, Wheel Side | 26 |
Seal Diameter | 55.6 mm |
Internal Teeth, wheel side | 19 |
Weight | 1.660 kg |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Weight | 0.289 kg |
Number of Connectors / Ports | 2 |
Cooling Hose | from engine to thermostat |
Function | Radiator Hose |
Type | Radiator Hose |
Additional Information 2 | with sensor, with flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.460 kg |
Type | Expansion Tank, coolant |
Function | Expansion Tank, coolant |
for OE number | 50515057 SK |
Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Window Regulator |
Type | Window Regulator |
Weight | 0.907 kg |
Paired article numbers | 177106 |
Operating Mode | Electric |
Additional Information | without electric motor |
Placement on Vehicle | Left Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, wheel speed |
Cable Length | 1200 mm |
Number of Connectors / Ports | 4 |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Type | Sensor, wheel speed |
Weight | 0.175 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 6Q1 423 891 H |
Type | Hydraulic Hose, steering |
Function | Hydraulic Hose, steering |
Manufacturer Restriction | TRW |
Weight | 0.194 kg |
External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Joint Kit, drive shaft |
Internal Teeth, wheel side | 27 |
Weight | 2.646 kg |
Type | Joint Kit, drive shaft |
Thread Size | M24 x 2,0 |
Placement on Vehicle | Front Axle Left, Wheel Side, Front Axle Right |
External Teeth, Wheel Side | 31 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with coolant level sensor |
Function | Expansion Tank, coolant |
Number of Connectors / Ports | 2 |
Material | PA (polyamide) |
Weight | 1.05 kg |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing Diameter | 18 mm |
Eject Force | 280 N |
Stroke | 104 mm |
Weight | 0.175 kg |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Placement on Vehicle | both sides |
Housing length | 169.5 mm |
Length | 298 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Length | 198 mm |
Outer diameter | 106 mm |
External Teeth, Wheel Side | 35 |
Seal Diameter | 71.5 mm |
Internal Teeth, wheel side | 29 |
Weight | 4.1 kg |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
External Thread Size | M33 x 1,5 |
Important compatibility info
Placement on Vehicle | Left |
Material | Plastic |
Paired article numbers | 192734 |
Colour | Silver |
Weight | 0.35 kg |
Type | Door Handle, interior equipment |
Function | Door Handle, interior equipment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.10 kg |
Placement on Vehicle | Front |
Operating Mode | Mechanical |
Shock Absorber Mounting Type | Top pin, Bottom Pin |
Max. Length | 309 mm |
Min. Length | 204 mm |
Pipe Diameter | 51 mm. 40 mm |
Piston conrod diameter | 13 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Cooler, engine oil |
Weight | 1.119 kg |
Number of Ribs | 20 |
Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.2 kg |
Outer diameter | 120 mm |
Thickness | 75 mm |
Number of Holes | 4 |
Bolt Hole Circle Diameter | 98 mm |
Outer diameter 1 | 37 mm |
Outer diameter 2 | 59 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Wheel Hub |
Type | Wheel Hub |
Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023