Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 1.432 kg |
Type | Tie Rod |
Function | Tie Rod |
External Thread Size | M16 x 1,5, M12 x 1,5 |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (184891)
- 1x Febi Inner Tie Rod (184263)
Important compatibility info
Weight | 0.036 kg |
Placement on Vehicle | Front Axle |
Material | Rubber |
Inner diameter | 26 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cable Pull, parking brake |
Weight | 0.420 kg |
Length | 1940 mm |
Placement on Vehicle | Left Rear, Right Rear |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 125 mm |
Outer diameter | 125 mm |
Additional Information 2 | without wheel bearing |
Type | Wheel Hub |
Bolt Hole Circle Diameter | 100 mm |
Inner diameter | 27 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Wheel Hub |
Weight | 1.580 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.640 kg |
Placement on Vehicle | Front Axle |
Length | 155.1 mm |
Width | 68.6 mm. 64.6 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 15 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information 2 | with piston clip, with anti-squeak plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Weight | 0.648 kg |
Function | Splash Guard, brake disc |
Type | Splash Guard, brake disc |
Placement on Vehicle | Rear Axle Left |
Paired article numbers | 174203 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.127 kg |
Material | Plastic |
Outer diameter | 60 mm |
Mounting points diameter | 8 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Function | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 22 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.046 kg |
Function | Sensor, exhaust gas temperature |
Spanner Size | 17 |
Number of Connectors / Ports | 2 |
Cable Length | 400 mm |
External Thread Size | M14 x 1,5 |
Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 1813.L5 |
Function | Mounting, engine |
Type | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Placement on Vehicle | Left |
Weight | 2.0 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Weight | 3.34 kg |
Paired article numbers | 175410 |
External Thread Size | M14 x 1,5 |
Material | Aluminium |
Placement on Vehicle | Lower, Front Axle Right |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Additional Information 2 | with bearing, with ball joint, with screw |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (174666)
- 1x Febi Ball Joint (36884)
- 2x Febi Nut, ball joint (23696)
- 1x Febi Bolt, wheel alignment (40196)
- 2x Febi Washer (07755)
- 1x Febi Nut (21557)
Important compatibility info
Housing length | 319.5 mm |
Mounting points diameter | 18 mm |
Weight | 0.325 kg |
Placement on Vehicle | both sides |
Length | 519 mm |
Eject Force | 625 N |
Stroke | 174 mm |
Housing Diameter | 19 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.58 kg |
Placement on Vehicle | Rear |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter 1 | 11 mm |
Material | Rubber |
Function | Bellow Kit, steering |
Type | Bellow Kit, steering |
Weight | 0.07715 kg |
Length | 155 mm |
Inner diameter 2 | 44 mm |
Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (18043)
- 1x Febi Clamping Clip (38761)
- 1x Febi Clamping Clip (38754)
Important compatibility info
Weight | 0.3 kg |
Function | Tensioner, timing belt |
Type | Tensioner, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Screw length below head | 40 mm |
External Thread Size | M12 x 1,5 |
Weight | 0.075 kg |
Placement on Vehicle | Front Axle, Rear Axle |
Length | 61 mm |
Material | Steel |
Outer diameter | 22.2 mm |
Spanner Size | 17 |
Surface | Zink flake coated |
Thread Length | 20 mm |
Bolt Head/Nut Design | Male Hex |
Quality/ Grade | 10.9 |
Shaft Length | 20 mm |
Wheel Fastening | Ball seat A/G |
Function | Wheel Bolt |
Type | Wheel Bolt |
Rims | for light alloy rims |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Brake Type | Disc Brake |
Cable Length | 669 mm |
Function | Warning Contact, brake pad wear |
Type | Warning Contact, brake pad wear |
Weight | 0.030 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.962 kg |
Function | Repair Set, propshaft centre bearing |
Type | Repair Set, propshaft centre bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (31851)
- 1x Febi Protective Cover, propshaft centre bearing (171015)
- 1x Febi Protective Cover, propshaft centre bearing (171017)
- 1x Febi Circlip (170445)
Important compatibility info
Weight | 0.871 kg |
Voltage | 12 V |
Placement on Vehicle | Rear |
Number of Connectors / Ports | 4 |
Type | Wiper Motor |
Function | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Shock Absorber Type | Oil Pressure |
Weight | 4.6 kg |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 724 mm |
Min. Length | 446 mm |
Pipe Diameter | 70 mm. 51 mm |
Mounting points diameter | 20 mm |
Type | Shock Absorber |
Function | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Weight | 0.111 kg |
External Thread Size | M10 x 1,5 |
Internal Thread Size | M10 x 1 |
Type | Brake Hose |
Function | Brake Hose |
Length | 305 mm |
Additional Information 2 | with banjo bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023