Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 51.5 mm |
| Outer diameter | 31 mm |
| Weight | 0.119 kg |
| Function | Centering Sleeve, propshaft |
| Type | Centering Sleeve, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.28
Important compatibility info
| Housing length | 276 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 17.7 mm |
| Stroke | 190 mm |
| Eject Force | 400 N |
| Housing Diameter | 18 mm |
| Weight | 0.2 kg |
| Length | 492 mm |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.28
Important compatibility info
| Weight | 1.79 kg |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, manual transmission |
| Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.28
Important compatibility info
| Mounting points diameter | 21 mm |
| Function | Mounting, control/trailing arm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 151 mm |
| Outer diameter | 84 mm |
| Weight | 2.545 kg |
| Type | Mounting, control/trailing arm |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.27
Important compatibility info
| Steering arm type | for control arm |
| Additional Information 2 | with bolts/screws |
| Placement on Vehicle | Lower Front Axle, both sides |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, control/trailing arm |
| Weight | 1.340 kg |
| Type | Mounting, control/trailing arm |
| Additional Information | with holder |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (18687)
- 1x Febi Mounting, control/trailing arm (18688)
- 2x Febi Mounting and Bolting Kit, control/trailing arm (104977)
£44.27
Important compatibility info
| Inspection Tag | ECE R90 Approved |
| Function | Brake Pad Set, disc brake |
| Width | 96 mm |
| Placement on Vehicle | Front Axle |
| Length | 152.4 mm |
| Thickness/Strength 1 | 16.1 mm |
| Type | Brake Pad Set, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
| Weight | 3.483 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.26
Important compatibility info
| Weight | 0.078 kg |
| Number of Connectors / Ports | 3 |
| Function | Sensor, switch module |
| Additional Information 2 | with seal ring |
| Type | Sensor, switch module |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.26
Important compatibility info
| Function | Oil Cooler, engine oil |
| Weight | 0.619 kg |
| Type | Oil Cooler, engine oil |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.24
Important compatibility info
| Length | 117 mm |
| Voltage | 11 V |
| Spanner Size | 12 |
| Weight | 0.04 kg |
| Fitting Depth | 30 mm |
| Glow Plug Type | after-glow capable |
| Type | Glow Plug |
| Function | Glow Plug |
| External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.23
Important compatibility info
| Weight | 1.2 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 42 mm |
| Type | Brake Caliper |
| Paired article numbers | 181772 |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.23
Important compatibility info
| Weight | 0.42 kg |
| Function | Tensioner Pulley, v-ribbed belt |
| Width of castor bearing surface | 27 mm |
| Material | Plastic |
| Outer diameter | 70 mm |
| Type | Tensioner Pulley, v-ribbed belt |
| Width | 29 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.23
Important compatibility info
| Surface | PTFE (Polytetrafluorethylene) coated |
| Weight | 0.102 kg |
| Width | 18 mm |
| Number of Teeth | 116 |
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.22
Important compatibility info
| Placement on Vehicle | Right |
| Weight | 2.147 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.20
Important compatibility info
| Weight | 0.090 kg |
| Placement on Vehicle | Rear |
| Colour | Black |
| Function | Cupholder |
| Extra Description | febi Plus |
| Type | Cupholder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.20
Important compatibility info
| Function | Brake Disc |
| Rim Hole Number | 10 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 284 mm |
| Thickness | 43.9 mm |
| Brake Disc Thickness | 16 mm |
| Minimum thickness | 13 mm |
| Bolt Hole Circle Diameter | 124 mm |
| Centering Diameter | 107.2 mm |
| Rotor Style | Solid |
| Surface | Coated |
| Weight | 6.030 kg |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.19
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Weight | 0.75 kg |
| Type | Mounting, engine |
| Placement on Vehicle | Rear, Upper |
| for OE number | LR 000597 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.19
Important compatibility info
| Placement on Vehicle | Upper |
| Weight | 1.021 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.19
Important compatibility info
| Weight | 4.134 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 238 mm |
| Thickness | 47.2 mm |
| Brake Disc Thickness | 18.1 mm |
| Minimum thickness | 16 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 59 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.19
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Minimum thickness | 18 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 60 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Thickness | 40 mm |
| Brake Disc Thickness | 20 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 252 mm |
| Weight | 4.27 kg |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.19
Important compatibility info
| Weight | 4.470 kg |
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 278 mm |
| Thickness | 43 mm |
| Brake Disc Thickness | 9 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.19
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 256 mm |
| Thickness | 49 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Weight | 4.760 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 4 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.19
Important compatibility info
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Additional Information 2 | with flange |
| Inner diameter | 93 mm |
| Placement on Vehicle | transmission sided |
| Height | 23.5 mm. 11.8 mm |
| Material | PTFE (polytetrafluoroethylene) |
| Outer diameter | 227 mm |
| Outer diameter 1 | 159 mm |
| Weight | 0.30 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.17
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Weight | 1.47 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Aluminium |
| Paired article numbers | 178173 |
| Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.17
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Aluminium |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 178172 |
| Weight | 1.47 kg |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.17
Important compatibility info
| Placement on Vehicle | Left Rear |
| Length | 355 mm |
| Paired article numbers | 47075 |
| Max. Length | 590 mm |
| Min. Length | 355 mm |
| Eject Force | 715 N |
| Weight | 0.86 kg |
| Stroke | 235 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.17
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.95 kg |
| Cable Length | 450 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.17
Important compatibility info
| Weight | 0.800 kg |
| Function | Cylinder Head, air compressor |
| Type | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.16
Important compatibility info
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Weight | 0.192 kg |
| Additional Information | with gasket/seal |
| Material | Plastic |
| Driver Position | for right-hand drive vehicles |
| Bore Diameter | 19 mm |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.16
Important compatibility info
| Weight | 1.80 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 37 mm |
| Outer diameter | 71 mm |
| Inner diameter | 30 mm |
| Number of Holes | 6 |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.15
Important compatibility info
| Weight | 0.692 kg |
| Function | Oil Cooler, automatic transmission |
| Additional Information 2 | with seal ring |
| Transmission Type | Automatic Transmission |
| Type | Oil Cooler, automatic transmission |
| Additional Information | with seal rings |
| for OE number | 02E 409 061 D S1 |
| Number of Ribs | 11 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Cooler, automatic transmission (105874)
- 2x Febi Seal Ring, oil cooler (lubrication) (108877)
£44.14
Important compatibility info
| Weight | 2.65 kg |
| Placement on Vehicle | Rear Axle |
| Function | Gasket Set, wheel hub |
| Type | Gasket Set, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ring, wheel hub (04454)
- 1x Febi Thrust Washer, external planetary gearbox (21951)
- 1x Febi Shaft Seal, wheel hub (05352)
- 1x Febi Cover Plate, dust-cover wheel bearing (21974)
£44.13
Important compatibility info
| Weight | 3.924 kg |
| Placement on Vehicle | Front Axle |
| Length | 192.3 mm. 193 mm |
| Width | 96.6 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20.3 mm. 19.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.13
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179445 |
| Weight | 2.034 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 43 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.13
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179444 |
| Weight | 2.034 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 43 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.13
Important compatibility info
| Inner diameter | 12 mm |
| Length | 89 mm |
| Weight | 0.87 kg |
| Material | Metal |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Thread Length | 50 mm |
| Bolt Head/Nut Design | Male Hex |
| Outer diameter | 75 mm |
| Mounting points diameter | 12 mm |
| Width of castor bearing surface | 32.5 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.13
Important compatibility info
| Weight | 1.386 kg |
| Type | Bushing, leaf spring hanger |
| Function | Bushing, leaf spring hanger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.12
Important compatibility info
| Weight | 1.42 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Left |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Replaces | 32271 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.12
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Function | Brake Hose |
| External Thread Size | M10 x 1 |
| Type | Brake Hose |
| Length | 785 mm |
| Paired article numbers | 185029 |
| Weight | 0.225 kg |
| Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.12
Important compatibility info
| Weight | 1.875 kg |
| Placement on Vehicle | Left |
| Length | 204 mm |
| Width | 170 mm |
| Thickness | 115 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.11
Important compatibility info
| Additional Information | with gaskets/seals |
| Weight | 0.040 kg |
| Internal Thread Size | M14 x 1,5 |
| Function | Pump, fuel pre-supply |
| Type | Pump, fuel pre-supply |
| Replaces | 22472 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.11
Important compatibility info
| Housing length | 282 mm |
| Function | Gas Spring, bonnet |
| Type | Gas Spring, bonnet |
| Piston conrod diameter | 8 mm |
| Stroke | 282 mm |
| Mounting points diameter | 18 mm |
| Eject Force | 260 N |
| Housing Diameter | 26 mm |
| Weight | 0.3 kg |
| Paired article numbers | 177459 |
| Length | 471 mm |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.10
Important compatibility info
| Operating Mode | Electric |
| Colour | Black |
| Number of Connectors / Ports | 3 |
| Outer Length | 142 mm |
| Function | Gear Lever Knob |
| Width | 59 mm. 72 mm |
| Weight | 0.19 kg |
| Type | Gear Lever Knob |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.10
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 174.5 mm |
| Width | 69.5 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Weight | 2.8 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.10
Important compatibility info
| Additional Information | with nuts |
| Outer diameter | 128 mm |
| Thickness | 20 mm |
| Additional Information 2 | with bolts/screws, with washers |
| Inner diameter | 41 mm |
| Placement on Vehicle | Front and Rear |
| Bolt Hole Circle Diameter | 90 mm |
| Function | Joint, propshaft |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Weight | 0.9 kg |
| Number of Holes | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (07543)
- 6x Febi Bolt, drive shaft flange (04678)
- 1x Febi Assembly Kit, propshaft joint (22117)
£44.10
Important compatibility info
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, bonnet |
| Function | Gas Spring, bonnet |
| Housing length | 279 mm |
| Mounting points diameter | 18 mm |
| Stroke | 160 mm |
| Eject Force | 260 N |
| Housing Diameter | 18 mm |
| Weight | 0.3 kg |
| Paired article numbers | 177460 |
| Length | 471 mm |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.10
Important compatibility info
| Length | 160 mm |
| Height | 51 mm |
| Width | 150 mm |
| Additional Information 2 | with seal ring, with oil sump gasket |
| Filter type | Screen Filter |
| Weight | 0.286 kg |
| Type | Hydraulic Filter Kit, automatic transmission |
| Function | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.08
Important compatibility info
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
| Material | PU (Polyurethane), Aluminium |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 0.319 kg |
| Inner diameter | 10 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.08
Important compatibility info
| Extra Description | febi Plus |
| Function | Oil Separator, crankcase ventilation |
| Type | Oil Separator, crankcase ventilation |
| Weight | 0.149 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.07
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178201 |
| Weight | 3.045 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.06
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178200 |
| Weight | 3.045 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.06
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023