Important compatibility info
Number of Connectors / Ports | 4 |
Function | Ignition Coil |
Type | Ignition Coil |
Weight | 2.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Joint, propshaft |
Length | 152 mm |
Outer diameter | 57 mm |
Replaces | 11545; 11546 |
Weight | 4.280 kg |
Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Function | Gasket Set, wheel hub |
Type | Gasket Set, wheel hub |
Weight | 2.01 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ring, wheel hub (04455)
- 1x Febi Shaft Seal, wheel hub (05354)
- 1x Febi Thrust Washer, external planetary gearbox (21951)
Important compatibility info
Weight | 1.831 kg |
Cone Size | 15 mm |
Paired article numbers | 175129 |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Left, Upper |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
External Thread Size | M12 x 1,25 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 23 mm |
Width | 85 mm |
Material | Metal |
Outer diameter | 65 mm |
Operating Mode | Automatic |
Weight | 0.647 kg |
Type | Belt Tensioner, v-ribbed belt |
Function | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Requires special tools for mounting |
Weight | 0.6 kg |
Chain Type | Silent Chain, Closed chain |
Number of Chain Links | 116 |
Timing Chain Size | Z53R |
Function | Timing Chain |
Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 37 mm |
Colour | Silver |
Bolt Hole Circle Diameter | 275 mm |
Number of Holes | 8 |
Function | Cover, wheels |
Weight | 1.7 kg |
Outer diameter | 364 mm |
Fits rim size | 17.5 Inch |
Type | Cover, wheels |
Inner diameter | 191 mm |
Material | Sheet Steel |
Surface | Painted |
Shape/Form | Open form |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gas Spring, bonnet |
Mounting points diameter | 17.8 mm |
Piston conrod diameter | 8 mm |
Housing Diameter | 18 mm |
Eject Force | 495 N |
Placement on Vehicle | both sides |
Housing length | 257.5 mm |
Length | 376 mm |
Stroke | 78 mm |
Type | Gas Spring, bonnet |
Weight | 0.175 kg |
Additional Information | Change interval/date according to gas spring imprint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.831 kg |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Right, Upper |
Steering arm type | Control Arm |
Additional Information 2 | with ball joint |
Paired article numbers | 175128 |
Function | Control/Trailing Arm, wheel suspension |
Cone Size | 15 mm |
Type | Control/Trailing Arm, wheel suspension |
External Thread Size | M12 x 1,25 |
Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.51 kg |
Placement on Vehicle | Left |
Function | Front Cover Lock |
Type | Front Cover Lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Material | Paper |
Water pump impeller material | Metal |
Function | Water Pump, engine cooling |
Number of Wings | 7 |
Number of Teeth | 19 |
Material | Cast Aluminium |
Weight | 0.879 kg |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Paired article numbers | 37451 |
Inner diameter | 12 mm |
Material | Aluminium |
Placement on Vehicle | Front, Rear Axle Right |
External Thread Size | M12 x 1,5 |
Type | Control/Trailing Arm, wheel suspension |
Weight | 0.59 kg |
Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (37450)
- 1x Febi Nut (37448)
Important compatibility info
Type | Piston, air compressor |
Function | Piston, air compressor |
Outer diameter | 75 mm |
Weight | 0.29 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Function | Valve, gear shift lever |
Weight | 0.220 kg |
Type | Valve, gear shift lever |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Front |
Operating Mode | Manual |
Extra Description | febi Plus |
Function | Window Regulator |
Type | Window Regulator |
Paired article numbers | 174876 |
Weight | 0.790 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.661 kg |
Bore Diameter | 19 mm |
Fill Medium | Brake Fluid |
Type | Master Cylinder, clutch |
Function | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.160 kg |
Placement on Vehicle | Lower Front Axle, Left |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 01071 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing, with ball joint |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Upper |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 23163 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 1.130 kg |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | FPM (fluoride rubber) |
Function | Gasket Set, cylinder head cover |
Weight | 0.282 kg |
Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.372 kg |
Placement on Vehicle | both sides |
Length | 625 mm |
Housing Diameter | 18 mm |
Eject Force | 160 N |
Stroke | 255 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, bonnet |
Function | Gas Spring, bonnet |
Housing length | 302 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023