Important compatibility info
for OE number | 7 173 046 |
Number of Connectors / Ports | 3 |
Function | Sensor, throttle position |
Weight | 0.040 kg |
Type | Sensor, throttle position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.481 kg |
Material | Cast Aluminium |
Number of Wings | 7 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Rubber |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 22 |
Weight | 0.091 kg |
for OE number | 1618.R0 |
Cable Length | 400 mm |
Number of circuits | 4 |
Lambda Sensor | Heated |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.23 kg |
Placement on Vehicle | transmission sided |
Material | PTFE (polytetrafluoroethylene), ACM (Polyacrylate) |
Outer diameter | 131 mm. 152 mm |
Thickness | 17.3 mm |
Inner diameter | 85 mm |
Function | Shaft Seal, crankshaft |
Type | Shaft Seal, crankshaft |
Additional Information 2 | with flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Drive Shaft |
Function | Drive Shaft |
Transmission-side joint diameter | 75.6 mm |
Wheel Sided Joint Diameter | 76.4 mm |
Min. Length | 582 mm |
External Teeth, Diff.Side | 22 |
Paired article numbers | 181290 |
External Teeth, Wheel Side | 22 |
Weight | 4.636 kg |
Thread Size | M20x1,5 |
Placement on Vehicle | Front Axle Left |
Additional Information | with Split Pin |
Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Width | 47.5 mm |
Outer diameter | 252 mm |
Thickness | 53 mm |
Inner diameter | 200 mm |
Bolt Hole Circle Diameter | 100 mm |
Centering Diameter | 55.1 mm |
Weight | 4.66 kg |
Number of mounting bores | 2 |
Max.skimmed drum measure | 201 mm |
Rim Hole Number | 4 -Hole |
Type | Brake Drum |
Function | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 165.1 mm |
Weight | 2.5 kg |
Placement on Vehicle | Front Axle |
Thickness/Strength 1 | 20.5 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information 2 | with bolts/screws |
Inspection Tag | ECE R90 Approved |
Width | 68.2 mm. 79.3 mm |
Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Expansion Tank, coolant |
Colour | Black |
Material | Plastic |
Weight | 0.364 kg |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
for OE number | 17 13 7 647 281 |
Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.765 kg |
Number of Connectors / Ports | 2 |
Additional Information | with coolant level sensor |
Function | Expansion Tank, coolant |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Material | Paper |
Water pump impeller material | Metal |
Function | Water Pump, engine cooling |
Number of Wings | 7 |
Number of Teeth | 19 |
Material | Cast Aluminium |
Weight | 0.879 kg |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.106 kg |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Placement on Vehicle | Left Front, Right Front |
Type | Mounting, engine |
Replaces | 05302; 05863; 05864; 05865 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.1 kg |
Placement on Vehicle | Rear Axle |
Length | 365 mm |
Thickness | 35 mm |
Additional Information 2 | without rubber mount(s) |
Rod/Strut | Coupling Rod |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
for OE number | 948 326 05 47 7390 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.38 kg |
Function | Wheel Bearing Kit |
Bolt Hole Circle Diameter | 112 mm |
Width | 69.4 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Bearing Type | Angular Ball Bearing |
Number of Holes | 5 |
Inner diameter | 32 mm |
Outer diameter | 130.9 mm |
Type | Wheel Bearing Kit |
Additional Information | with fastening/mounting material |
Additional Information 2 | Wheel Bearing integrated into wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Aluminium |
Additional Information 2 | with seal ring, with bolts/screws |
Weight | 1.060 kg |
Number of Wings | 7 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
Additional Information
Technical Information
To identify the correct article, the currently installed product must be determined!
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.57 kg |
Paired article numbers | 103772 |
Placement on Vehicle | Left Rear |
Operating Mode | Electric, Manual |
Function | Window Regulator |
Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Bush, steering knuckle |
Outer diameter 1 | 98 mm |
Height | 77 mm |
Width | 98 mm |
Length | 98 mm |
Outer diameter 2 | 60 mm |
Bearing Type | Needle Bearing, Thrust Bearing |
Function | Bush, steering knuckle |
Weight | 0.791 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Roll-off Piston, air suspension bellows |
Function | Roll-off Piston, air suspension bellows |
Placement on Vehicle | Rear Axle |
Material | Metal |
Outer diameter | 190 mm |
Thickness | 156 mm |
Colour | Black |
Internal Thread Size | M18 x 1,5 |
Weight | 3.93 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 181773 |
Brake Caliper Type | Brake Caliper (1 piston) |
Placement on Vehicle | Rear Axle Left |
Weight | 1.2 kg |
Type | Brake Caliper |
Function | Brake Caliper |
Brake caliper piston diameter | 42 mm |
Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.564 kg |
Material | Cast Aluminium |
Number of Wings | 8 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber/Metal |
Type | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 154 mm |
Thickness | 34 mm |
Inner diameter | 30 mm |
Number of Ribs | 5 |
Parameter | 6PK |
Function | Belt Pulley, crankshaft |
Type | Belt Pulley, crankshaft |
Weight | 2.140 kg |
Replaces | 36888 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023