Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.18 kg |
| Function | Ignition Coil |
| Number of Connectors / Ports | 4 |
| Type | Ignition Coil |
| Replaces | 37318 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Weight | 1.131 kg |
| Height | 195 mm |
| Width | 180 mm |
| Inner diameter | 64 mm |
| Function | Charge Air Hose |
| Turbocharger line | Turbocharger to Inlet Manifold |
| Type | Charge Air Hose |
| Hose Length | 570 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Wire Diameter | 14.5 mm |
| Weight | 2.77 kg |
| Placement on Vehicle | Rear Axle |
| Length | 325 mm |
| Outer diameter | 100 mm |
| Function | Suspension Spring |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Weight | 2.30 kg |
| Function | Joint Kit, drive shaft |
| for OE number | 431 498 103 C |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, drive shaft (33249)
- 1x Febi Bellow Kit, drive shaft (03636)
£42.41
Important compatibility info
| Function | Tensioner Pulley, timing belt |
| Width of castor bearing surface | 26 mm |
| Track rollers material | Plastic |
| Type | Tensioner Pulley, timing belt |
| Weight | 0.282 kg |
| Outer diameter | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Function | Control Valve, camshaft adjustment |
| Type | Control Valve, camshaft adjustment |
| Weight | 0.177 kg |
| Paired article numbers | 175429 |
| Placement on Vehicle | Exhaust Side |
| Number of Connectors / Ports | 2 |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Outer diameter | 91.945 mm |
| Type | Piston, air compressor |
| Function | Piston, air compressor |
| Weight | 0.47 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Weight | 1.430 kg |
| Placement on Vehicle | inner, both sides |
| Length | 114.5 mm. 175 mm |
| Thickness | 71 mm. 35 mm |
| Inner diameter | 20 mm. 13 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.40
Important compatibility info
| Weight | 0.160 kg |
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
| for OE number | 4F0 721 257 D |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.40
Important compatibility info
| Cooling Hose | from water pipe to auxiliary water pump, from engine to engine cooler |
| Weight | 0.73 kg |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Additional Information | with quick coupling |
| Placement on Vehicle | Upper |
| Type | Radiator Hose |
| Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.40
Important compatibility info
| Weight | 1.55 kg |
| Placement on Vehicle | Left |
| Material | Cast Aluminium, Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.40
Important compatibility info
| Weight | 0.210 kg |
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.40
Important compatibility info
| External Thread Size | M18 x 1,5 |
| Number of circuits | 4 |
| Function | Oxygen Sensor |
| Cable Length | 525 mm |
| Weight | 0.44 kg |
| Spanner Size | 22 |
| Type | Oxygen Sensor |
| Lambda Sensor | Heated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.40
Important compatibility info
| Weight | 0.6 kg |
| Cooling Hose | from engine cooler to water pump |
| Function | Radiator Hose |
| Type | Radiator Hose |
| for OE number | 74 21 700 918 |
| Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.39
Important compatibility info
| Function | Oil Cooler, engine oil |
| Weight | 0.73 kg |
| Additional Information | with gasket/seal |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.39
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 299 mm |
| Width | 202 mm |
| Material | ABS (Acrylonitrile-Butadiene-Styrene Copolymerisate) |
| Thickness | 24 mm |
| Voltage | 12 V |
| Operating Mode | Manual |
| Outer/Inner Mirror | Heatable, Convex |
| Weight | 0.471 kg |
| Section | Upper section |
| Type | Mirror Glass, exterior mirror |
| Camber Radius | 1200 mm |
| Function | Mirror Glass, exterior mirror |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.39
Important compatibility info
| Weight | 0.44 kg |
| Length | 138 mm |
| Width | 89 mm |
| Material | Aluminium |
| Thickness | 44.5 mm |
| Function | Oil Cooler, engine oil |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.39
Important compatibility info
| Width | 19.2 mm. 21.9 mm |
| Outer diameter | 53.1 mm. 63 mm |
| Inner diameter | 47.7 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| for OE number | 5131.A6 S2 |
| Function | Repair Kit, axle beam |
| Weight | 0.19 kg |
| Type | Repair Kit, axle beam |
Additional Information
Technical Information
To identify the correct article, the currently installed product must be determined!
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.39
Important compatibility info
| Weight | 0.779 kg |
| Placement on Vehicle | both sides |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.38
Important compatibility info
| Weight | 3.580 kg |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 255 mm |
| Thickness | 54.1 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.37
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023