Proud to be a UK-based company
Contact us
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Brake caliper piston diameter | 54 mm |
| Function | Brake Caliper |
| Weight | 2.99 kg |
| Type | Brake Caliper |
| Paired article numbers | 181557 |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.22
Important compatibility info
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 54 mm |
| Placement on Vehicle | Front Axle Right |
| Weight | 2.99 kg |
| Paired article numbers | 181556 |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.22
Important compatibility info
| Length | 255.5 mm |
| Height | 41 mm |
| Width | 161 mm |
| Additional Information 2 | with oil sump gasket |
| Weight | 0.54 kg |
| Type | Hydraulic Filter Kit, automatic transmission |
| Function | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.21
Important compatibility info
| Weight | 0.35 kg |
| External Thread Size | M10 x 1,25 |
| Placement on Vehicle | Rear Axle Left |
| Length | 155 mm |
| Material | Steel |
| Spanner Size | 15 |
| Paired article numbers | 41188 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.18
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 0.875 kg |
| Steering arm type | Control Arm |
| Inner diameter | 8 mm |
| Additional Information 2 | with bearing |
| Material | Sheet Steel |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Lower, Front |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.16
Important compatibility info
| Height | 256 mm |
| Outer diameter | 200 mm |
| Inner diameter | 27 mm |
| Filter type | Filter Insert |
| Seal Diameter | 211 mm. 22 mm |
| Function | Oil Filter |
| Weight | 0.776 kg |
| Type | Oil Filter |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.16
Important compatibility info
| Weight | 0.78 kg |
| Number of Connectors / Ports | 2 |
| Additional Information 2 | without lid |
| Additional Information | with coolant level sensor |
| for OE number | 17 13 7 642 160 |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.16
Important compatibility info
| for OE number | 21634024 |
| Function | Sensor, oil pressure |
| Type | Sensor, oil pressure |
| Additional Information 2 | with seal ring |
| Weight | 0.09 kg |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.15
Important compatibility info
| Additional Information | with gaskets/seals |
| Material | Aluminium |
| Weight | 0.430 kg |
| Type | Oil Cooler, engine oil |
| Function | Oil Cooler, engine oil |
| Core Length | 110 mm |
| Core Width | 70 mm |
| Core Depth | 47 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.15
Important compatibility info
| Placement on Vehicle | both sides |
| Function | Gas Spring, boot/cargo area |
| Housing length | 372 mm |
| Weight | 0.2 kg |
| Length | 649 mm |
| Housing Diameter | 28 mm |
| Eject Force | 745 N |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 10 mm |
| Type | Gas Spring, boot/cargo area |
| Stroke | 241 mm |
| Replaces | 180359 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.14
Important compatibility info
| for OE number | 33220-80G00 |
| Weight | 0.1 kg |
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.13
Important compatibility info
| Additional Information 2 | with seal ring |
| Height | 106 mm |
| Outer diameter | 108 mm |
| Weight | 0.216 kg |
| Type | Water Separator, fuel system |
| Function | Water Separator, fuel system |
| External Thread Size | M95 x 2,5 |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.13
Important compatibility info
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| for OE number | D652-39-040 |
| Weight | 1.012 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.13
Important compatibility info
| Weight | 0.469 kg |
| Type | Tensioner, timing belt |
| Function | Tensioner, timing belt |
| Track rollers material | Metal |
| Inner diameter | 8 mm |
| Width | 91 mm |
| Width of castor bearing surface | 91 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.12
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Additional Information 2 | without ball bearing |
| Weight | 0.725 kg |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.12
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.107 kg |
| Cable Length | 650 mm |
| Number of circuits | 3 |
| Lambda Sensor | Heated, Regulating Sensor |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.12
Important compatibility info
| Weight | 0.690 kg |
| Length | 350 mm |
| Height | 95 mm |
| Width | 175 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.12
Important compatibility info
| Weight | 6.070 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 280 mm |
| Thickness | 43.8 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 19.4 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 62 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Rim Hole Number | 4 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.11
Important compatibility info
| Weight | 0.08 kg |
| Length | 68 mm |
| Outer diameter | 18 mm |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.11
Important compatibility info
| Function | Mounting, engine |
| Weight | 0.88 kg |
| Placement on Vehicle | Rear, Lower |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Replaces | 102727 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.10
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023