Important compatibility info
Transmission Type | Dual-Clutch Transmission |
Clutch Type | for dry clutch |
Type | Clutch Kit |
Function | Clutch Kit |
Important compatibility info
Material | AEM (Ethylene Acrylate Rubber) |
Inner diameter 1 | 40 mm |
Function | Charge Air Hose |
Colour | Black |
Inner diameter 2 | 40 mm |
Type | Charge Air Hose |
Replaced by | BTH1384 |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1002S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1103S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1107S)
Important compatibility info
Material | AEM (Ethylene Acrylate Rubber) |
Colour | Black |
Inner diameter 2 | 46 mm |
Function | Charge Air Hose |
Type | Charge Air Hose |
Inner diameter 1 | 46 mm |
Important compatibility info
Length | 115 mm |
Thread Measurement 1 | M24X1.5 |
Thread Measurement 2 | M20X1.5 |
Thread Type | with right-hand thread |
Cone Size | 26 mm |
Type | Tie Rod End |
Function | Tie Rod End |
Placement on Vehicle | Front Axle |
Important compatibility info
Function | Inner Tie Rod |
Type | Inner Tie Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Thread Measurement 2 | M17X1.5 |
Length | 308 mm |
Thread Measurement 1 | M14X1.5 |
Function | Inner Tie Rod |
Axle Joint Length | 308 mm |
Axle Joint Thread Type | with right-hand thread, with external thread |
Type | Inner Tie Rod |
Important compatibility info
Placement on Vehicle | Front Axle Right |
Thread Measurement 2 | M14X1.5 |
Length | 353 mm |
Thread Measurement 1 | M16X1.0 |
Function | Inner Tie Rod |
Axle Joint Length | 353 mm |
Axle Joint Thread Type | with external thread |
Type | Inner Tie Rod |
Paired article numbers | FTR5355 |
Important compatibility info
Axle Joint Length | 320 mm |
Thread Measurement 2 | M18X1.5 |
Thread Measurement 1 | M16X1.5 |
Length | 320 mm |
Function | Inner Tie Rod |
Type | Inner Tie Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Placement on Vehicle | Front Axle |
Bearing Code | Gen 0 |
Inner diameter 1 | 35 mm |
Inner diameter 2 | 35 mm |
Outer diameter 1 | 60 mm |
Width 1 | 18.5 mm |
Outer diameter 2 | 60 mm |
Width 2 | 18.5 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Important compatibility info
Function | Wheel Bearing Kit |
Width 1 | 40 mm |
Inner diameter 1 | 42 mm |
Outer diameter | 82 mm |
Type | Wheel Bearing Kit |
Placement on Vehicle | Rear Axle |
Bearing Code | Gen 1 |
Important compatibility info
Placement on Vehicle | Front Axle |
Bearing Code | Gen 0 |
Inner diameter 1 | 45 mm |
Inner diameter 2 | 45 mm |
Outer diameter 1 | 73.5 mm |
Width 1 | 20 mm |
Outer diameter 2 | 73.5 mm |
Width 2 | 20 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Important compatibility info
Bearing Code | Gen 1 |
Placement on Vehicle | Rear Axle |
Inner diameter 1 | 42 mm |
Outer diameter 1 | 75 mm |
Width 1 | 37 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Important compatibility info
Required quantity | 2 |
Function | Warning Contact, brake pad wear |
Length | 500 mm |
Type | Warning Contact, brake pad wear |
Placement on Vehicle | Rear Axle |
Important compatibility info
Impeller Diameter | 76 mm |
Water Pump Pulley Diameter | 80 mm |
Additional Information | with gaskets/seals |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Function | Brake Hose |
Additional Information | with banjo fitting |
Placement on Vehicle | Rear Axle Left |
Additional Information 2 | without banjo bolt |
Length | 355 mm |
Thread Measurement 1 | M10x1 |
Thread Type | with internal thread |
Type | Brake Hose |
Important compatibility info
Placement on Vehicle | Front Axle Left |
Length | 648 mm |
External Teeth, Wheel Side | 28 |
External Teeth, Diff.Side | 28 |
Type | Drive Shaft |
Function | Drive Shaft |
Important compatibility info
Rotor Style | Vented |
Number of Holes | 5 |
Height | 54.5 mm |
Outer diameter | 350 mm |
Brake Disc Thickness | 32 mm |
Minimum thickness | 29.4 mm |
Centering Diameter | 67 mm |
Quantity | 1 |
Function | Brake Disc |
Type | Brake Disc Rotor |
Surface | Coated |
Placement on Vehicle | Front Axle |
Number of mounting bores | 4 |
Important compatibility info
Placement on Vehicle | Left Rear |
Length 1 | 1680 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Length 2 | 1455 mm |
Important compatibility info
Function | Cable Pull, parking brake |
Length 1 | 1960 mm |
Type | Cable Pull, parking brake |
Placement on Vehicle | Right Rear |
Length 2 | 1717 mm |
Important compatibility info
Diameter | 19.1 mm |
Type | Slave Cylinder, clutch |
Function | Slave Cylinder, clutch |
Material | Plastic |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023