Important compatibility info
Weight | 3.24 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 43045 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Replaces | 43068 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.128 kg |
Material | Cast Aluminium |
Number of Wings | 5 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Paper |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Material | Plastic |
Colour | black |
Weight | 0.45 kg |
Lock System | with two keys, with lock barrel |
Type | Exterior Door Handle |
Function | Exterior Door Handle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, transmission sided, Front Axle Right |
Internal Teeth, wheel side | 28 |
Weight | 2.198 kg |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 345 mm |
Diameter | 1 mm |
Additional Information | with rubber-metal mount |
Rod/Strut | Coupling Rod |
Inner diameter 1 | 14 mm |
Inner diameter 2 | 15 mm |
Weight | 1.150 kg |
Pipe Diameter | 16 mm |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Pressure Limiting Valve |
Weight | 0.38 kg |
Internal Thread Size | M22 x 1,5 |
Function | Pressure Limiting Valve |
Outlet pressure from | 7 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Aluminium |
Number of Wings | 6 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
Weight | 0.613 kg |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.24 kg |
Placement on Vehicle | Front Axle Right, Lower |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 43044 |
Steering arm type | Control Arm |
Material | Sheet Steel |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.76 kg |
Material | Cast Aluminium |
Number of Wings | 6 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber/Metal |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Aluminium |
Number of Teeth | 19 |
Number of Wings | 6 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Weight | 0.97 kg |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Metal |
Bore Diameter | 78 mm |
Thickness | 1.2 mm |
Weight | 0.27 kg |
Type | Gasket, cylinder head |
Function | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Bore Diameter | 12 mm |
Shock Absorber Type | Gas Pressure |
Shock Absorber System | Twin-Tube |
Shock Absorber Design | Suspension Strut |
Weight | 4.500 kg |
Shock Absorber Mounting Type | Top pin, Bottom Clamp |
Mounting bores distance | 53 mm |
Max. Length | 518 mm |
Min. Length | 317 mm |
Pipe Diameter | 51 mm |
Piston conrod diameter | 20 mm |
Type | Shock Absorber |
Function | Shock Absorber |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.5 kg |
Housing length | 340 mm |
Mounting points diameter | 18 mm |
Function | Gas Spring, boot/cargo area |
Piston conrod diameter | 10 mm |
Stroke | 176 mm |
Eject Force | 680 N |
Housing Diameter | 18 mm |
Length | 582 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 25 mm |
Inspection Tag | ECE R90 Approved |
Weight | 1.31 kg |
Function | Brake Shoe Set, parking brake |
Outer diameter | 180 mm |
Placement on Vehicle | Rear Axle |
Type | Brake Shoe Set, parking brake |
Additional Information | with fastening/mounting material |
for OE number | 221 420 05 20 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Hose Line, driver cab tilting device |
Type | Hose Line, driver cab tilting device |
Pressure | 400 bar |
Weight | 2.24 kg |
Inner diameter | 4.2 mm |
Outer diameter | 8.6 mm |
Length | 2775 mm |
External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.98 kg |
Placement on Vehicle | Front Axle |
Length | 120 mm |
Cone Size | 30 mm |
Function | Tie Rod End |
External Thread Size | M24 x 1,5 |
Extra Description | ProKit |
Internal Thread Size | M24 x 1,5 RHT |
Type | Tie Rod End |
Thread Type | with right-hand thread |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.45 kg |
Width | 36 mm |
Outer diameter | 76 mm |
Inner diameter | 7 mm |
Number of Ribs | 2 |
Function | Belt Pulley, alternator |
Type | Belt Pulley, alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.90 kg |
External Thread Size | M20 x 1,5 |
Placement on Vehicle | Rear Axle Left |
Length | 160 mm |
Paired article numbers | 46145 |
Rod/Strut | Coupling Rod |
Cone Size | 26 mm |
Pipe Diameter | 26 mm |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 2871 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Weight | 0.460 kg |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Number of Ribs | 11 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Auxiliary water pump (cooling water circuit) |
Function | Auxiliary water pump (cooling water circuit) |
Material | Plastic |
Weight | 0.32 kg |
Number of Connectors / Ports | 2 |
Voltage | 12 V |
for OE number | 078 121 601 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023