Important compatibility info
Function | Gasket, exhaust manifold |
Type | Gasket, exhaust manifold |
Additional Information 2 | with heat shield |
Weight | 0.370 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.31 kg |
Placement on Vehicle | Rear Axle |
Width | 60 mm |
Outer diameter | 75 mm |
Inner diameter | 42 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information 2 | with retaining ring |
Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.011 kg |
Function | Multi-Function Switch |
Number of Connectors / Ports | 12 |
Extra Description | febi Plus |
Type | Multi-Function Switch |
Combi Switch Function | Mirror Adjustment, Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.76 kg |
Material | Cast Aluminium |
Number of Wings | 6 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber/Metal |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, transmission sided, Front Axle Right |
Internal Teeth, wheel side | 28 |
Weight | 2.198 kg |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | V-Belt |
Weight | 0.61 kg |
Length | 1950 mm |
Function | V-Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Bore Diameter | 12 mm |
Shock Absorber Type | Gas Pressure |
Shock Absorber System | Twin-Tube |
Shock Absorber Design | Suspension Strut |
Weight | 4.500 kg |
Shock Absorber Mounting Type | Top pin, Bottom Clamp |
Mounting bores distance | 53 mm |
Max. Length | 518 mm |
Min. Length | 317 mm |
Pipe Diameter | 51 mm |
Piston conrod diameter | 20 mm |
Type | Shock Absorber |
Function | Shock Absorber |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 33 mm |
Material | Plastic |
Outer diameter | 153 mm |
Inner diameter | 30 mm |
Number of Ribs | 5 |
Parameter | 6PK |
Function | Belt Pulley, crankshaft |
Weight | 2.16 kg |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 2871 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Weight | 0.460 kg |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Number of Ribs | 11 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 560 mm |
Steering arm type | Control Arm |
Weight | 1.240 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Sheet Steel |
Inner diameter | 12 mm. 10 mm |
Rod/Strut | Push Rod |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Rod/Strut, wheel suspension |
Type | Rod/Strut, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Right |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178153 |
Weight | 2.55 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 44 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.45 kg |
Width | 36 mm |
Outer diameter | 76 mm |
Inner diameter | 7 mm |
Number of Ribs | 2 |
Function | Belt Pulley, alternator |
Type | Belt Pulley, alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.90 kg |
External Thread Size | M20 x 1,5 |
Placement on Vehicle | Rear Axle Left |
Length | 160 mm |
Paired article numbers | 46145 |
Rod/Strut | Coupling Rod |
Cone Size | 26 mm |
Pipe Diameter | 26 mm |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 25 mm |
Inspection Tag | ECE R90 Approved |
Weight | 1.31 kg |
Function | Brake Shoe Set, parking brake |
Outer diameter | 180 mm |
Placement on Vehicle | Rear Axle |
Type | Brake Shoe Set, parking brake |
Additional Information | with fastening/mounting material |
for OE number | 221 420 05 20 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.5 kg |
Housing length | 340 mm |
Mounting points diameter | 18 mm |
Function | Gas Spring, boot/cargo area |
Piston conrod diameter | 10 mm |
Stroke | 176 mm |
Eject Force | 680 N |
Housing Diameter | 18 mm |
Length | 582 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 35 mm |
Outer diameter | 123 mm |
Inner diameter | 30 mm |
Function | Belt Pulley, alternator |
Weight | 0.746 kg |
Type | Belt Pulley, alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.24 kg |
Number of Wings | 7 |
Material | Cast Aluminium |
Seal Material | Paper |
Water pump impeller material | Metal |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Additional Information | with gasket/seal |
Additional Information 2 | with studs |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.24 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 43045 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Replaces | 43068 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.128 kg |
Material | Cast Aluminium |
Number of Wings | 5 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Paper |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.89 kg |
Function | Parts Set, maintenance service |
Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (32122)
- 1x Febi Air Filter (30355)
- 1x Febi Fuel filter (17635)
- 4x Febi Spark Plug (13524)
- 1x Febi Screw Plug, oil sump (03160)
- 1x Febi Seal Ring, oil drain plug (07215)
- 1x Febi Filter, cabin air (09429)
- 1x Febi Filter, cabin air (09430)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023