Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| Weight | 2.8 kg |
| Internal Teeth, wheel side | 27 |
| Seal Diameter | 99 mm |
| External Teeth, Wheel Side | 38 |
| Outer diameter | 100 mm |
| Length | 168 mm |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Bore Diameter | 19 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Weight | 0.658 kg |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Material | CR (chloroprene rubber) |
| Additional Information 2 | with clamps |
| Inner diameter 1 | 49 mm |
| Inner diameter 2 | 55 mm |
| Weight | 0.445 kg |
| Type | Charge Air Hose |
| Function | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Steering arm type | Control Arm |
| Placement on Vehicle | Rear Axle Left |
| Rod/Strut | Pull Rod |
| Paired article numbers | 23965 |
| Weight | 0.548 kg |
| Type | Rod/Strut, wheel suspension |
| Function | Rod/Strut, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Weight | 2.204 kg |
| Placement on Vehicle | Front Axle Left, Wheel Side, Front Axle Right |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 25 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 23 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Weight | 0.049 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 783 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Length | 334 mm |
| Placement on Vehicle | both sides |
| Stroke | 127 mm |
| Housing Diameter | 15 mm |
| Eject Force | 270 N |
| Housing length | 183.5 mm |
| Function | Gas Spring, rear window |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 6 mm |
| Weight | 0.133 kg |
| Type | Gas Spring, rear window |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Switch point to | 10 bar |
| Function | Oil Pressure Switch |
| Control Range | 0,7 +/- 0,15 bar |
| Number of Connectors / Ports | 2 |
| Outer diameter | 46 mm. 39.8 mm |
| Length | 80 mm |
| Weight | 0.123 kg |
| Spanner Size | 19 |
| External Thread Size | M14 x 1,5 |
| Thread Length | 12 mm |
| Type | Oil Pressure Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Weight | 2.514 kg |
| Outer diameter | 141 mm |
| Additional Information 2 | without wheel bearing |
| Bolt Hole Circle Diameter | 112 mm |
| Placement on Vehicle | Front Axle, Rear Axle |
| Width | 91 mm |
| Type | Wheel Hub |
| Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Weight | 0.331 kg |
| Material | PA (polyamide) |
| Type | Pipe, oil filler neck |
| Function | Pipe, oil filler neck |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Weight | 1.1 kg |
| Outer diameter | 79 mm |
| Number of grooves | 10 |
| Width of castor bearing surface | 41 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Placement on Vehicle | Left Front |
| Weight | 0.9 kg |
| Type | Window Regulator |
| Function | Window Regulator |
| Additional Information | without electric motor |
| Paired article numbers | 179349 |
| Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Width | 55 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Outer diameter | 90 mm |
| Inner diameter | 55 mm |
| Weight | 1.301 kg |
| Bearing Type | Tapered Roller Bearing |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Piston conrod diameter | 8 mm |
| Length | 664 mm |
| Housing Diameter | 19 mm |
| Housing length | 363.5 mm |
| Function | Gas Spring, boot/cargo area |
| Mounting points diameter | 16.5 mm |
| Eject Force | 535 N |
| Stroke | 237 mm |
| Placement on Vehicle | both sides |
| Weight | 0.294 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Function | Gasket Kit, cylinder head |
| for OE number | 541 016 13 20 S1 |
| Type | Gasket Kit, cylinder head |
| Weight | 1.927 kg |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, cylinder head (39484)
- 1x Febi Gasket, intake manifold (21911)
- 1x Febi Gasket, exhaust manifold (30615)
- 1x Febi Gasket, cylinder head cover (28685)
- 2x Febi Screw (46116)
- 4x Febi Cylinder Head Bolt (12200)
£40.43
Important compatibility info
| Weight | 0.12 kg |
| Length | 60 mm |
| Outer diameter | 39.5 mm. 45.5 mm |
| Spanner Size | 17 |
| Thread Length | 12 mm |
| Number of Connectors / Ports | 1 |
| Function | Sensor, oil pressure |
| Switch point to | 3 bar |
| External Thread Size | M12 x 1,5 |
| Type | Sensor, oil pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| External Thread Size | M22 x 1,5 |
| Length | 162 mm |
| Internal Teeth, wheel side | 25 |
| Outer diameter | 90 mm |
| Weight | 2.540 kg |
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| External Teeth, Wheel Side | 30 |
| Seal Diameter | 85.6 mm |
| Placement on Vehicle | Front Axle, Wheel Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Replaces | 06773; 06788 |
| Height | 474 mm |
| Outer diameter | 302 mm |
| Inner diameter | 191 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Weight | 2.950 kg |
| Placement on Vehicle | Front Axle |
| Length | 412 mm |
| Function | Suspension Spring |
| Wire Diameter | 13.3 mm |
| Type | Suspension Spring |
| Outer diameter | 116 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Voltage | 24 V |
| Number of Connectors / Ports | 2 |
| Pump Type | Mono Pump |
| Function | Washer Fluid Pump, window cleaning |
| Weight | 0.110 kg |
| Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023