Important compatibility info
Weight | 0.135 kg |
Voltage | 24 V |
Operating Mode | Electronic |
Number of Connectors / Ports | 9 |
Function | Flasher Unit |
Type | Flasher Unit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Length | 259 mm |
Function | Brake Shaft, drum brake |
Type | Brake Shaft, drum brake |
Number of Teeth | 10 |
Weight | 3.182 kg |
Outer diameter | 108 mm |
Screw length below head | 195 mm |
External Thread Size | M22 x 1,5 |
Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Switch point to | 10 bar |
Function | Oil Pressure Switch |
Control Range | 0,7 +/- 0,15 bar |
Number of Connectors / Ports | 2 |
Outer diameter | 46 mm. 39.8 mm |
Length | 80 mm |
Weight | 0.123 kg |
Spanner Size | 19 |
External Thread Size | M14 x 1,5 |
Thread Length | 12 mm |
Type | Oil Pressure Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Front Axle Left |
Length | 540 mm |
Function | Brake Shaft, drum brake |
Paired article numbers | 07072 |
Weight | 6.198 kg |
Type | Brake Shaft, drum brake |
Outer diameter | 97 mm |
Number of Teeth | 26 |
DIN / ISO | 5480 |
Screw length below head | 491 mm |
Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Piston conrod diameter | 8 mm |
Length | 664 mm |
Housing Diameter | 19 mm |
Housing length | 363.5 mm |
Function | Gas Spring, boot/cargo area |
Mounting points diameter | 16.5 mm |
Eject Force | 535 N |
Stroke | 237 mm |
Placement on Vehicle | both sides |
Weight | 0.294 kg |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Cable Length | 940 mm |
Weight | 0.096 kg |
Number of Connectors / Ports | 2 |
Paired article numbers | 176139 |
Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 640 mm |
Number of Connectors / Ports | 3 |
Function | Sensor, crankshaft pulse |
Weight | 0.1 kg |
Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Transmission Type | 5-Speed Manual Transmission |
Weight | 0.478 kg |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Transmission ID | MQ200 |
Inner length 1 | 852 mm |
Outer length 1 | 1221 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
Weight | 1.650 kg |
Internal Teeth, wheel side | 20 |
Seal Diameter | 55.6 mm |
External Teeth, Wheel Side | 26 |
Outer diameter | 73 mm |
Placement on Vehicle | Wheel Side |
Length | 141 mm |
External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.051 kg |
Cable Length | 746 mm |
Function | Sensor, wheel speed |
Placement on Vehicle | Front Axle Right |
Number of Connectors / Ports | 2 |
Paired article numbers | 171151 |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.75 kg |
Number of Connectors / Ports | 4 |
Function | Relay Valve |
Internal Thread Size | M22 x 1,5 |
Type | Relay Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 55 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Sealing lip material | NBR (nitrile butadiene rubber) |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Outer diameter | 90 mm |
Inner diameter | 55 mm |
Weight | 1.301 kg |
Bearing Type | Tapered Roller Bearing |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Belts | with trapezoidal tooth profile |
Width | 15 mm |
Number of Teeth | 104 |
Surface | Coated |
Water pump impeller material | Plastic |
Type | Water Pump & Timing Belt Kit |
Function | Water Pump & Timing Belt Kit |
Weight | 1.054 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (11071)
- 1x Febi Water Pump, engine cooling (10600)
Important compatibility info
Weight | 0.331 kg |
Material | PA (polyamide) |
Type | Pipe, oil filler neck |
Function | Pipe, oil filler neck |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | CR (chloroprene rubber) |
Additional Information 2 | with clamps |
Inner diameter 1 | 49 mm |
Inner diameter 2 | 55 mm |
Weight | 0.445 kg |
Type | Charge Air Hose |
Function | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.514 kg |
Outer diameter | 141 mm |
Additional Information 2 | without wheel bearing |
Bolt Hole Circle Diameter | 112 mm |
Placement on Vehicle | Front Axle, Rear Axle |
Width | 91 mm |
Type | Wheel Hub |
Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Door Check |
Mounting points diameter | 11 mm |
Type | Door Check |
Weight | 0.56 kg |
Length | 172 mm |
Placement on Vehicle | Left |
Mounting bores distance | 107 mm. 46 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 24 V |
Number of Connectors / Ports | 2 |
Pump Type | Mono Pump |
Function | Washer Fluid Pump, window cleaning |
Weight | 0.110 kg |
Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Opening Temperature | 87 °C |
Function | Thermostat Housing |
Weight | 0.299 kg |
Additional Information 2 | with seal ring |
Type | Thermostat Housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Placement on Vehicle | Front Axle Right, Lower |
Function | Control/Trailing Arm, wheel suspension |
Material | Sheet Steel |
Weight | 3.24 kg |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | 174578 |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023